AMTECH LIMITED.'s Stress Analysis Software

■Summary Adduction differential gear (nickname: pincoid gear) is an internal rotation differential gear reduction device that has a one-tooth or tw...

• Analysis Software

• Stress Analysis Software

■Summary We have developed ANSI/AGMA2101-D04 software as a higher version of ANSI/AGMA2001-C95. This software calculates gear strength based on the...

• Analysis Software

• Stress Analysis Software

■Summary ・Evaluate the lubrication effect on gear tooth surface damage based on the AGMA925-A03:2003:2003 standard. ・Applicable standard: AGMA925...

• Analysis Software

• Stress Analysis Software

■Summary This software allows you to arbitrarily set the arc tooth trace (radius), so you can freely set the tooth trace from a tooth trace close t...

• Analysis Software

• Stress Analysis Software

■Summary The CGR (Constant Gear Ratio) rack design system generates tooth profiles for pinions and racks that move based on gear ratios, and can ca...

• Analysis Software

• Stress Analysis Software

■Summary Asymmetric gears can increase tooth load capacity without changing gear size or material. Compared to standard pressure angle teeth, high ...

• Analysis Software

• Stress Analysis Software

■Summary CT-FEM Opera, which was released in 2014, has undergone numerous tests and has a proven track record.This time, it has been reborn as CT-F...

• Analysis Software

• Stress Analysis Software

■Summary - Rational number decomposition software is software that decomposes a decimal point value into two types of fractions. ・There are two wa...

• Analysis Software

• Stress Analysis Software

■Summary This worm gear is called the Hindley worm gear and has the oldest history as a drum-shaped worm gear. Both the central cross section of th...

• Analysis Software

• Stress Analysis Software

■Summary The Hindley worm gear is a representative example of an hourglass-shaped worm gear, but due to the complexity of the wheel tooth profile, ...

• Analysis Software

• Stress Analysis Software

■Summary This is software that can generate tooth profiles for diamond tools for dressing threaded grindstones. When grinding a gear with tooth sur...

• Analysis Software

• Stress Analysis Software

■Summary The new elliptical gear software allows designs with not only the same number of leaves but also different numbers of leaves. Non-circular...

• Analysis Software

• Stress Analysis Software

■Summary When forming and grinding helical gears, three-dimensional interference occurs, and the amount varies greatly depending on factors such as...

• Analysis Software

• Stress Analysis Software

■Summary We have newly developed Gear navigation systemⅲ. As before, this software is capable of analyzing gear machining shapes using hob, pinion ...

• Analysis Software

• Stress Analysis Software

■Summary This software is a new version of GearPro Master. This software is also suitable for manufacturing molded gears, as it can generate tooth ...

• Analysis Software

• Stress Analysis Software

■Summary Each tooth profile is determined based on the number of teeth on the inner rotor, the root diameter and eccentricity of the outer rotor. T...

• Analysis Software

• Stress Analysis Software

■Summary Hob Chip is software that can calculate the cutting shape and thickness of chips during hob cutting, and simulate the cutting amount at th...

• Analysis Software

• Stress Analysis Software

■Summary Hob Erase, end mill tooth profile analysis software for gear electrodes, is software that determines the end mill tooth profile coordinate...

• Analysis Software

• Stress Analysis Software

■Summary Hyp-Trochoid gear design system is software for designing trochoid curve gears (external gear x internal gear). The contact ratio is sever...

• Analysis Software

• Stress Analysis Software

■Summary In the old software, the software name was L-Niemann worm. However, since worm gears are used not only for straight 90° but also for worms...

• Analysis Software

• Stress Analysis Software

■Summary As with external gears, three-dimensional interference occurs, and the amount varies greatly depending on factors such as the helix angle ...

• Analysis Software

• Stress Analysis Software

■Summary A threaded gear pair of external gears will mesh if both gears have involute tooth profiles, but if the internal gear and external gear ar...

• Analysis Software

• Stress Analysis Software

■Summary The barrel-shaped worm of an internal gear worm gear has a large number of teeth that engage simultaneously like an hourglass-shaped worm,...

• Analysis Software

• Stress Analysis Software

■Summary involute Gemma can simulate relative tooth profile error, tooth contact, and rotational transmission error using actual data measured with...

• Analysis Software

• Stress Analysis Software

■Summary involuteΣ (low-tooth gear) can be designed to accommodate small-tooth gears with one or two teeth.

• Analysis Software

• Stress Analysis Software

■Summary The old software L-hypoid gear design system has been replaced by the new software involuteΣⅲ (Hypoid gear design). This software allows f...

• Analysis Software

• Stress Analysis Software

■Summary K-H-V Differential gear design system is a reduction mechanism. This is software for differential reduction (acceleration) mechanism desig...

• Analysis Software

• Stress Analysis Software

■Summary Currently, bevel gears are processed using specialized gear cutting machines manufactured by Gleason and Klingelnberg, but in recent years...

• Analysis Software

• Stress Analysis Software

■Summary Gear specifications and tooth profile modification are the same as for single groove.

• Analysis Software

• Stress Analysis Software

■Summary When designing a reducer, determining the number of reduction stages and the ratio of the number of teeth to the total reduction ratio, an...

• Analysis Software

• Stress Analysis Software

■Summary Rack and pinion includes VGR rack and CGR rack, but this software can generate a rack that meshes with pinions as pin gears.

• Analysis Software

• Stress Analysis Software

■Summary We have newly developed the "Planetary gear design system (Planetary & Mysterious Planet)". Like conventional software, this software allo...

• Analysis Software

• Stress Analysis Software

■Summary Gears whose standard rack is a tooth profile composed of a sine curve (hereinafter referred to as sine tooth profile gears), which have be...

• Analysis Software

• Stress Analysis Software

■Summary Power skiving, a type of gear cutting method for cylindrical gears (external gears, internal gears), has been patented for 100 years since...

• Analysis Software

• Stress Analysis Software

■Summary Spline dimension design is based on the JIS B 1603:1995 standard. The spline shape, tooth thickness, and fit tolerance can be easily deter...

• Analysis Software

• Stress Analysis Software

■Summary The commonly used cylindrical worm gears have a small number of contact teeth, so they cannot achieve large load capacities. To solve this...

• Analysis Software

• Stress Analysis Software

■Summary Tapered and crossed gear design system is software that designs involute gears with crossed axes angles rather than a combination of paral...

• Analysis Software

• Stress Analysis Software

■Summary - Dislocation tooth thickness conversion is software that calculates the relationship between tooth thickness and dislocation coefficient....

• Analysis Software

• Stress Analysis Software

■Summary UTS [Uninterrupted Transmission System] is a constant transmission transmission system using non-circular gears. Gear-type transmissions, ...

• Analysis Software

• Stress Analysis Software

■Summary The VGR (Variable Gear Ratio) rack design system generates the tooth profile of the rack that moves based on the gear ratio curve with the...

• Analysis Software

• Stress Analysis Software

■Summary When cutting worm gears, the K-shaped (3-shaped) tooth profile is generally machined with a milling cutter (or grindstone), but the worms ...

• Analysis Software

• Stress Analysis Software