Monolithic Power Systems, Inc.'s Power ICs

■Summary The MP2610 is a monolithic switching charger for 1-cell or 2-cell Li-ion battery packs with internal power MOSFETs. Achieves up to 2A char...

• Integrated Circuits

• Power ICs

■Summary The MP26101 is a monolithic switching charger for 1-cell or 2-cell Li-ion battery packs. It has an integrated power MOSFET and can output ...

• Integrated Circuits

• Power ICs

■Summary The MP26123 is a monolithic DC/DC step-down switching charger for 2-cell or 3-cell Li-ion battery packs. It integrates a high-side power M...

• Integrated Circuits

• Power ICs

■Summary The MP26124 is a monolithic DC/DC step-down switching charger for four series cell Li-ion battery packs. The MP26124 integrates a high-sid...

• Integrated Circuits

• Power ICs

■Summary The MP2615 is a high efficiency switch-mode battery charger suitable for 1-cell to 2-cell Li-Ion or Li-Polymer applications. The MP2615 ca...

• Integrated Circuits

• Power ICs

■Summary The MP2615A is a high efficiency switch-mode battery charger suitable for 1-cell or 2-cell Li-Ion or Li-Polymer applications. The MP2615A ...

• Integrated Circuits

• Power ICs

■Summary The MP2619 is a monolithic switching charger for 2-3 cell Li-ion battery packs with internal power MOSFETs. Achieves up to 2A charging cur...

• Integrated Circuits

• Power ICs

■Summary The MP2639A is a highly integrated and flexible switch-mode battery charge management device for 2-cell Li-ion and Li-Polymer batteries us...

• Integrated Circuits

• Power ICs

■Summary The MP2639C is a highly integrated and flexible switch-mode battery charge management device for 2-cell Li-ion and Li-Polymer batteries us...

• Integrated Circuits

• Power ICs

■Summary The MP2650 is a highly integrated buck or boost charger IC with narrow voltage DC (NVDC) power path management and USB OTG (On-The-Go). MP...

• Integrated Circuits

• Power ICs

■Summary The MP2651 is a buck-boost charger IC designed for series 1-4 cell battery pack applications. It can accept a wide range of input voltages...

• Integrated Circuits

• Power ICs

■Summary The MP2659 is a highly integrated switching charger designed for portable devices with 3-cell to 6-cell series Li-Ion or Li-Polymer batter...

• Integrated Circuits

• Power ICs

■Summary The MP2672 is a highly integrated, flexible switch-mode charger IC for Li-ion batteries with two cells connected in series. This makes it ...

• Integrated Circuits

• Power ICs

■Summary The MP2672A is a highly integrated flexible switch-mode charger IC for lithium-ion batteries with two cells connected in series. This make...

• Integrated Circuits

• Power ICs

■Summary The MP2696B is a highly integrated, flexible, switch-mode and power-path management battery charger IC for single-cell Li-Ion and Li-Polym...

• Integrated Circuits

• Power ICs

■Summary The MP2733 is a 4.5A highly integrated switching mode battery management device for single-cell Li-ion or Li-Polymer batteries. The device...

• Integrated Circuits

• Power ICs

■Summary This is a buck-boost charger for battery packs with 1 to 4 cells connected in series. It can charge batteries over a wide input voltage (V...

• Integrated Circuits

• Power ICs

■Summary The MP2762A is a highly integrated buck or boost charger IC with narrow voltage DC (NVDC) power path management and USB OTG (On-the-Go) fo...

• Integrated Circuits

• Power ICs

■Summary The MP6505 is a single-phase brushless DC motor driver with an input voltage range of 4.5V to 16V and a maximum output current of 400mA. M...

• Integrated Circuits

• Power ICs

■Summary MP6508A is a bipolar stepping motor driver with two built-in full bridges consisting of N-channel power MOSFETs. The device can deliver up...

• Integrated Circuits

• Power ICs

■Summary The MP6510 is a single-phase, brushless DC motor driver with integrated power MOSFETs. Drives a single phase brushless DC motor. The input...

• Integrated Circuits

• Power ICs

■Summary The MP6517 is a single-phase, brushless DC motor driver that integrates power MOSFETs and Hall effect sensors. The MP6517 drives single-ph...

• Integrated Circuits

• Power ICs

■Summary The MP6527 is a 10-channel half-bridge DMOS output driver with integrated power MOSFETs. It can achieve output current (IOUT) up to 0.8A o...

• Integrated Circuits

• Power ICs

■Summary MP6536 is a 3-channel half-bridge driver IC for driving 3-phase brushless DC motors. The MP6536 features low current shutdown mode, standb...

• Integrated Circuits

• Power ICs

■Summary The MP6540 and MP6540A are three-phase brushless DC motor drivers that integrate three half-bridges consisting of six N-channel power MOSF...

• Integrated Circuits

• Power ICs

■Summary The MP6541 is a three-phase brushless DC (BLDC) motor driver that integrates three half-bridges consisting of six N-channel power MOSFETs....

• Integrated Circuits

• Power ICs

■Summary The MP6541A is a three-phase brushless DC (BLDC) motor driver that integrates three half-bridges consisting of six N-channel power MOSFETs...

• Integrated Circuits

• Power ICs

■Summary The MP6543C is a three-phase brushless DC (BLDC) motor driver with three integrated half-bridges consisting of six N-channel power MOSFETs...

• Integrated Circuits

• Power ICs

■Summary The MP6545 is a 3-phase power stage IC designed to drive brushless DC (BLDC) motors or other loads. The MP6545 operates over an input volt...

• Integrated Circuits

• Power ICs

■Summary The MP6545A is a 3-phase power stage IC designed to drive brushless DC (BLDC) motors or other loads. The MP6545A operates over an input vo...

• Integrated Circuits

• Power ICs

■Summary The MP6546 is a 3-phase brushless DC (BLDC) motor driver for gimbal applications. It features three half-bridge power stages, predrivers, ...

• Integrated Circuits

• Power ICs

■Summary The MP6602 is a stepper motor driver with integrated indexer/translator and internal current regulation. With internal current sensing, th...

• Integrated Circuits

• Power ICs

■Summary The MP6604A is a dual H-bridge motor driver IC designed to drive stepper motors, brushed DC motors, and other loads. The device has an inp...

• Integrated Circuits

• Power ICs

■Summary The MP6604B is a dual H-bridge motor driver IC designed to drive stepper motors, brushed DC motors, and other loads. The MP6604B operates ...

• Integrated Circuits

• Power ICs

■Summary The MP6604C is a dual H-bridge motor driver IC designed to drive stepper motors, brushed DC motors, and other loads. The MP6604C operates ...

• Integrated Circuits

• Power ICs

■Summary MP6605C is a 4-channel low-side driver IC with I2C interface. Integrates a low-side MOSFET (LS-FET) and a high-side (HS) clamp diode to dr...

• Integrated Circuits

• Power ICs

■Summary The MP6605D is a 4-channel low-side MOSFET (LS-FET) driver IC that integrates four LS-FETs and a high-side (HS) clamp diode to drive induc...

• Integrated Circuits

• Power ICs

■Summary MP6605E is a 4-channel low-side driver IC with serial interface. Integrates a low-side MOSFET (LS-FET) and a high-side (HS) clamp diode to...

• Integrated Circuits

• Power ICs

■Summary The MP6606 is an 8-channel low-side (LS) driver IC with a serial interface. The device integrates a low-side MOSFET (LS-FET) and a high-si...

• Integrated Circuits

• Power ICs

■Summary The MP6612 is an H-bridge motor driver used to drive reversible motors, which can drive DC motors, stepper motor windings, or other loads....

• Integrated Circuits

• Power ICs

■Summary The MP6612D is an H-bridge motor driver used to drive reversible motors, which can drive DC motors, stepper motor windings, or other loads...

• Integrated Circuits

• Power ICs

■Summary The MP6613 is an H-bridge motor driver IC designed to drive stepper motors, brushed DC motors, and other loads. The MP6613 operates over a...

• Integrated Circuits

• Power ICs

■Summary MP6614 is an H-bridge motor driver designed to drive reversible motors. This device can drive one DC motor, one winding of a stepper motor...

• Integrated Circuits

• Power ICs

■Summary The MP6615 is an H-bridge DC motor driver with a full bridge consisting of four N-channel power MOSFETs. The device also integrates a pred...

• Integrated Circuits

• Power ICs

■Summary The MP6630 is a 3-phase brushless DC motor driver with integrated power MOSFET for notebook fan drivers. The input voltage range is 2V to ...

• Integrated Circuits

• Power ICs

■Summary The MP6631A is a 3-phase brushless DC (BLDC) motor driver with integrated power MOSFET. The device accepts a single external Hall-effect s...

• Integrated Circuits

• Power ICs

■Summary The MP6632 is a three-phase brushless DC (BLDC) motor driver controller with up to 1A drive current. Drives a 3-phase BLDC fan motor with ...

• Integrated Circuits

• Power ICs

■Summary The MP6632A is a 3-phase brushless DC (BLDC) motor driver with up to 1A drive current and 6V to 50V input voltage (VIN). The MP6632A featu...

• Integrated Circuits

• Power ICs

■Summary The MP9518 is a single-phase, brushless DC motor driver that integrates power MOSFETs and Hall effect sensors. The MP9518 drives single-ph...

• Integrated Circuits

• Power ICs

■Summary The MPQ6517B is a single-phase brushless DC (BLDC) motor driver that integrates power MOSFETs and Hall effect sensors. The device drives s...

• Integrated Circuits

• Power ICs

■Summary The MPQ6519 is a monolithic step-down current source driver for applications requiring accurate and fast current response control. The MPQ...

• Integrated Circuits

• Power ICs

■Summary The MPQ6523 is a triple, half-bridge, DMOS output driver with integrated power MOSFETs that can drive up to three different loads. The thr...

• Integrated Circuits

• Power ICs

■Summary The MPQ6524 is a four half-bridge DMOS output driver with integrated power MOSFETs that can drive up to four different loads. The four hal...

• Integrated Circuits

• Power ICs

■Summary The MPQ6526 is a six half-bridge DMOS output driver with integrated power MOSFETs that can drive up to six different loads. The six half-b...

• Integrated Circuits

• Power ICs

■Summary MPQ6527-AEC1 is a 10-channel half-bridge DMOS output driver with integrated power MOSFET. It can achieve output current (IOUT) up to 0.8A ...

• Integrated Circuits

• Power ICs

■Summary The MPQ6541-AEC1 is a three-phase brushless DC (BLDC) motor driver that integrates three half-bridges. The three half-bridges consist of s...

• Integrated Circuits

• Power ICs

■Summary The MPQ6541A-AEC1 is a three-phase brushless DC (BLDC) motor driver that integrates three half-bridges. The three half-bridges consist of ...

• Integrated Circuits

• Power ICs

■Summary MPQ6610-AEC1 is a half-bridge driver with current measurement and regulation capabilities. The device can deliver up to 3A of output curre...

• Integrated Circuits

• Power ICs

■Summary The MPQ6612A-AEC1 is an H-bridge motor driver used to drive reversible motors and can drive one DC motor, one winding of a stepper motor, ...

• Integrated Circuits

• Power ICs

■Summary The MPQ6612A-D-AEC1 is an H-bridge motor driver used to drive reversible motors and can drive one DC motor, one winding of a stepper motor...

• Integrated Circuits

• Power ICs

■Summary MPQ6614-AEC1 is an H-bridge motor driver designed to drive reversible motors. It can drive one DC motor, one winding of a stepper motor, o...

• Integrated Circuits

• Power ICs

■Summary MPQ6615-AEC1 is an H-bridge DC motor driver. The H-bridge consists of four N-channel power MOSFETs. The on-resistance (RDS (ON) ) of each ...

• Integrated Circuits

• Power ICs

■Summary The MPQ6626-AEC1 is a 6-channel, half-bridge DMOS output driver with integrated power MOSFETs. Continuous output current (IOUT) up to 0.8A...

• Integrated Circuits

• Power ICs

■Summary MPQ6628-AEC1 is an 8-channel half-bridge DMOS output driver with integrated power MOSFET. Output current (IOUT) up to 0.8A can be achieved...

• Integrated Circuits

• Power ICs

■Summary The MPQ6631H-AEC1 is a 3-phase brushless DC (BLDC) motor driver with integrated power MOSFETs. The device accepts a single external Hall-e...

• Integrated Circuits

• Power ICs

■Summary The MPQ6653-AEC1 is a single-phase brushless DC (BLDC) motor driver that integrates power MOSFETs and incorporates a Hall effect sensor. D...

• Integrated Circuits

• Power ICs