All Categories
History
This section provides an overview for bars as well as their applications and principles. Also, please take a look at the list of 223 bar manufacturers and their company rankings. Here are the top-ranked bar companies as of December, 2024: 1.Wieland Chase LLC, 2.T & T Manufacturing, LLC., 3.The Rose Corporation.
Table of Contents
A bar, also known as a crowbar, is a steel tool primarily used for removing large steel nails, typical in construction projects. It features a simple design with a split end for gripping nails and an L-shaped bend for leverage. This design allows for efficient nail extraction when force is applied to the L-shaped part.
Besides being a nail puller, its steel construction makes it sufficiently heavy to function as a hammer. There are three main types of bars, each designed for specific applications.
Bars are commonly employed in carpentry, especially for nail removal during house demolitions or renovations. They enable the separation of nails from wood with minimal effort, making them a practical tool for DIY projects at home. Additionally, bars are useful for opening packing boxes, dismantling woodwork, and other similar tasks.
Bars vary in size, with larger ones around 60 cm for bigger nails and smaller ones as short as 25 cm for lighter tasks. The appropriate size should be selected based on the application. There are three primary types of bar shapes:
Bars are recognized as designated intrusion tools, and thus, carrying them concealed without a valid reason is legally prohibited.
Bars, being heavy and made of steel, can be hazardous if not used correctly. Here are some guidelines for safe usage:
1. To expose the head of a nail in the wood, use the bar to tap the nail head lightly. This initial step makes the nail easier to pull out.
2. Insert the exposed nail into the split end of the bar.
3. Apply leverage to extract the nail. Using pliers for final removal is advisable for nails longer than 40 mm.
Bars come in various lengths and shapes, each suited for different purposes. Here are some recommendations:
1. Flat bar: A conventional type known for its ease of grip, particularly suited for general use.
2. Hexagonal and octagonal bars: These bars offer a firm grip and are ideal for emergencies, thanks to their unique cross-sectional shapes.
3. Pipe disassembly crowbar: Lightweight and ideal for prolonged use, these bars are recommended for hobbyists and DIY enthusiasts.
*Including some distributors, etc.
Sort by Features
Sort by Area
Wieland Chase LLC, founded in 1837 and headquartered in Montpelier, Ohio, USA, is a manufacturer of a diverse range of brass products. The company produces products including renewable ECO BRONZE and ECO BRASS materials as well as brass rods, forgings, and ingots. These superior components are ideal for an array of industries, including automotive, plumbing, electronics, and marine applications, as it provides optimal strength, corrosion resistance, and thermal conductivity. Products like the ECO BRONZE and ECO BRASS offered for industries requiring advanced brass and bronze solutions are ecologically sound and sustainable.
Wesso. Inc. was founded in 1994, headquartered in Conroe, TX, and is a manufacturer of tungsten carbide to meet the demand in the decanter centrifuge market. The company offers half-moon CNLHM, nozzle liners, wear block 31, and many more. The company also manufactures customized tungsten carbide components. It comprehends how the products are used in the real world and how the equipment is operated. Following a thorough analysis of the problem, the company collaborated with the customers' engineers to design and construct a special plow using a special grade of tungsten carbide.
U.S. Titanium Industry Inc. is based in Monrovia, California, and is a manufacturer and supplier of titanium & titanium alloy, and metals such as zirconium, tantalum, niobium, and hafnium that have applications in various industries. The company provides titanium welding tubes&pipes, tube sheets, explode titanium clad steel plates, and, titanium bar&rod that have applications in pressure vessels, seawater desalination, heat exchangers, the petrochemical industry, and, pharmacy markets. They offer services including fabrication, forging, exportation, and metal processing that are needed in Mining, Oil&Gas, Aerospace, Construction, and, Automotive industries.
Tuttle Mfg. Co. is a fastener manufacturer headquartered in Barrington, Illinois, USA and established in 1929, currently a division of the Arlington Fastener Company after being purchased in 1979. The company primarily produces threaded rods, studs, and bent bolts which are then distributed by their parent company. Their computer CNC operations and personalized thread rolling services allow them to custom manufacture products to customer’s project specifications with various different metals and irregular shapes as available options.
Tri-State Aluminum, established in 1977, is a manufacturer and supplier situated in Shreveport, Louisiana, United States. Tri-State Aluminum offers a range of products, such as aluminum bars, tubes, angles, channels, and custom shapes, among others. The products are crucial components in various industries, such as construction, transportation, medical, and military. The products are used for various purposes, such as creating lightweight and durable parts with high corrosion resistance and thermal conductivity. The company also provides design, engineering, machining, finishing, and assembly services for its clients.
The Rose Corporation was established in 1987 in Reading, PA, and is a contract manufacturer of bespoke large-scale steel industrial equipment and weldments. The portfolio consists of fabrication, machining, blasting and painting, assembly and testing, and many more. The company employs other companies to produce products or parts and components utilized for manufacturing large-scale industrial parts, products, and components. It deals with industrial fabrication and the installation of large components, sub-assemblies, and complete systems or machines. The company is accredited with The ASME Certification Mark (The MARK), which signifies the international mark of safety and quality.
TGW International was founded in 1745 in Sheffield, England and is branched in Kentucky, USA as the manufacturer of machine knife. The company focuses on producing machine knives for other manufacturers. The packaging industry resolves all its cutting applications with TGW knives including vertical forms, horizontal wrapping, cup and tray sealing and vacuuming packaging. For the processing industry the company manufactures replacement knives and related parts. For all levels of Converting industry, there is production of circular and rectangular replacement machine knives. The Printing industry gets its Pressroom, Bindery & Mailroom, Finishing, and Tag & Label machinery knives from TGW.
T&T Manufacturing was founded in 1977 and is headquartered in Spooner, Wisconsin. The company is a member of the Bretting family of companies which also includes Absolut. While Absolut design, manufactures, and build paper bag machinery and converting equipment, T&T is a designer, manufacturer, and builder of all types of fixtures for industrial applications, specialty machinery, and engineered wood equipment. The company’s product line includes conveying equipment, lift & turns, production machinery, and weld fixtures. The company also provides design, engineering, field service, training, and individual OEM & replacement parts such as custom machinery and engineered wood equipment.
Storm Power Components (SPC) is an American ISO 9001 and ITAR compliant contract manufacturer of bus bars and connectors founded in 1990. Based in Decatur, Tennessee, the company manufactures custom bus bars in various sizes, shapes, and finishes. They also produce insulators, circuit board stiffeners, and flexible braided connectors. SPC products are RoHS, REACH, DFARS compliant, and primarily serve clients in the aerospace, defense, and telecommunications industries. The company also offers in-house electroplating, powder coating, fabrication, and testing services for prototyping as well as mass production orders.
SDP/SI was founded in 1950 and is situated in New Hyde Park, New York. SDPP/SI is a manufacturer of precision gears and high-quality mechanical components used in the aerospace, industrial manufacturing, medical technology, and robotics fields. The company manufactures parts in a variety of materials including alloy steel, stainless steel, bronze, brass, nylon, and titanium. The company also provides coating services such as heat treating, zinc plating, and painting. Additional custom options are available including manufacturing to customer drawings and specifications.
Steiner Technologies, Inc., founded in 1998 and headquartered in Houston, Texas, is a manufacturer and supplier of advanced industrial and scientific equipment. The company offers a diverse range of products, including precision microscopes, digital imaging systems, laser scanning confocal microscopes, advanced imaging software, and scientific cameras. These products cater to various industries such as research, academia, healthcare, and manufacturing, enabling users to achieve precise measurements, analyses, and imaging in respective fields.
Based in Bayville, NY, SAE Manufacturing Specialties Corp. is an ISO-certified supplier and manufacturer of industrial equipment, chemicals, components, ordinance, electronics, and systems for industries ranging from aerospace to high tech to law enforcement. Examples of product offerings include raw materials, chemicals, and lubricants for industrial purposes to finished products such as security helmets for law enforcement, and military ordnances. SAE also provides research and development as well as technical support for other companies in similar industries.
Rathbone Precision Metals, Inc. established in Palmer, Massachusetts, in 1905 is a manufacturer of Cold Rolled Profiles, Cold Drawn Profiles, Shaped Wire, and Profiles. The company's product portfolio includes Cold Drawn Alloy Steel Gas Key for the Firearms Industry, Cold Rolled Steel Turbine Seal for the Power Generation Industry, Cold Drawn Carbon Steel Gear Profile for the Heavy Equipment Industry and Cold Drawn Stainless Steel Orthopedic Rods for the Medical Industry. The company serves markets including power generation, firearms, computer, medical, oil exploration and lawn and garden markets.
Florig Industrial Company, inc. was founded in 1975 and is headquartered in Conshohocken, Pennsylvania. The company is an industrial and architectural component manufacturer serving the construction, aerospace, manufacturing, and other industries. The company utilizes services such s rolling & bending to fabricate bars, beams, pipes, and extrusions. Other manufacturing capabilities include shearing & forming, tooling & machining, and cutting via laser, plasma, water jet, and burning. The company provides engineering, design, testing, repair, and equipment rebuilding services.
Quantum Storage Systems, established in 1992 and headquartered in Miami, Florida, is an American manufacturer and supplier specializing in storage solutions. The company offers a range of products including heavy-duty plastic bins, cabinets, and containers, such as ultra-stack and hang bins, plastic drawer cabinets, and airport security style nesting bins. Its steel shelving systems provide dual-layer constructions and double-hemmed perimeters for strength and durability, whereas its wire shelving systems, which are rust-resistant, are designed for wet and humid environment. Additionally, the company’s Millenia brand features polymer shelving systems. These products address storage needs across personal workspaces, manufacturing facilities, warehouses, and laboratories.
PURITY ZINC METALS is a family-owned manufacturer and supplier of zinc dust, zinc alloys, and zinc alloys, among other zinc products for the metals industry. The company was founded in 1989 and has its headquarters in Clarksville, Tennessee. Most of their customers are Global Fortune 500 companies and they serve the US, Canada, and international markets. Their range of products are applicable for custom cathodic protection in oil tanks, grounding cells, ground rods, gas distribution systems, and transmission pipelines. In recent years, this ISO 9001:2008 certified company acquired Advanced Metalworking and became a major shareholder of the Federal Technology Group.
PSI Industries, Inc., established in Irving, Texas, in 1987 is a manufacturer of turn-key custom aluminum extrusions used in industries such as Automotive and Transportation, Aerospace and Aviation. The company's products include Custom Aluminum Extrusions and services such as machining, cutting, finishing, and fabrication. The company serves markets including Electrical and Electronics, Renewable Energy, Industrial and Machinery and Consumer Goods. The company also offers services including assembly, CNC machining, and a variety of finishing options on anodizing and powder coat lines.
Precision Metals and Engineering LLC, founded in Columbia, SC, in 2016 is a supplier of Alloys used in industries including Aerospace, Maritime, and Defense. The company's product portfolio includes a range of alloys, including but not limited to stainless steel, aluminum, copper, nickel, and specialty alloys. The company also provides services such as quality assurance to meet industry standards and comply with international quality certifications, Custom Solutions, national distribution and product selection based on industry needs.
Polyurethane Products was founded in the early 1980s and is headquartered in Addison, Illinois. The company is a manufacturer of polyurethane products, polyurethane metal fabrication tooling, and steel brake tooling for any both individual and industrial-scale projects. The company’s polyurethane metal fabrication tooling line includes radius tooling, press brake tooling, and urethane springs subdivisions which encompass custom radius tooling, hemming dies, and compression springs. Stock and standard products include urethane bumpers, coil storage, custom machining, mold making, and food-grade polyurethane.
Plastic Design, Inc. was founded in 1976 and is based in North Chelmsford, Massachusetts. The company is a manufacturer of equipment commonly used in industries such as biomedical, pharmaceutical, microelectronics, and photonics. The company achieved ISO 9001:2015 certification in 2018. The company’s products include wet process equipment, industrial systems, life sciences machinery, clean room storage, and more. The company also offers precision welding and machining services as well as plastic welding services for CNC plastic machined parts.
Perfex Corporation was established in 1924 as a manufacturer of cleaning tools for pharmaceutical and food manufacturing environments. The company, based in Poland, New York, started under the Brooklyn Fiber Broom Company brand before changing its name to Perfex Corporation. They supply professional cleaning tools, including brooms, brushes, and mops. Their mopping system includes mop frames, wringers, stainless steel baskets, and sieves. The company also supplies material handling tools such as sanitary shovels, tool mounting bars, and scrapers for food manufacturing and raw material processing facilities.
Penn Stainless Products Inc. is a supplier and manufacturer of stainless-steel flat-rolled flat, bar, structural and tubular products. Penn Stainless Products Inc. was founded in 1949, and located in USA. Penn Stainless serves domestic and international customers in stainless, high-temperature, corrosion, Duplex and PH alloys. They offer many processed capabilities that include level, plate shear, sheet shear, plasma, HQ plasma, laserjet and dynamic waterjet, as well as machine, saw and Amada production cut.
Pearl Technologies Inc. is an American blown film accessory and packaging punch manufacturer founded in 1985 and headquartered in Savannah, New York. The punches, blades, package converting equipment, and blown film extruders they produce have applications in perforating pouches for consumer handling, wicketing and venting pouches for preserving packaged contents, and guiding and collapsing blown film for the production of bags, wraps, and liners. Machinery and products the company provides are utilized in food packaging, retail, agriculture, and medical industries.
Paul Murphy Plastics Co., established in 1962 and headquartered in Roseville, Michigan, USA, is a manufacturer of plastic products, and fabrication items. The product line comprises multiple plastic items such as extruded plastic profiles, custom plastic extrusions, stock angles, and injection-molded components. These products offer advantages such as optimal durability, corrosion resistance, and flexibility in design. These plastics find applications in a wide array of industries, including construction, automotive, electronics, and consumer goods manufacturing. The company offers environmentally friendly products, and is ISO 9001:2015 certified, using CAD systems for product design.
Palm Commodities International, Inc., founded in 1978, is a supplier of metals and chemicals and a manufacturer of electroless nickel grade liquid nickel sulfate, liquid sodium hypophosphite, rare earth chemicals such as cerium acetate, chloride and nitrate, and lanthanum acetate. The metal anodes the company supplies include nickel, zinc, cadmium, copper, and tin for electrolytic plating. The Nashville, Tennessee, company serves the battery, catalyst, mining water treatment, and electronic industries. The company is ISO 14001:2015 and ISO 9001:2015 certified and is a subsidiary of Umicore USA Inc since 2013.
Newton Distributing Company, founded in 2002, is a manufacturer and supplier of commercial restrooms and safety products. The restroom products comprise hand dryers, soap, and hand sanitizer dispensers, baby changing stations, toilet partitions, and various building specialties like lockers, trash cans, bollards, water coolers, and touchless door pulls. They offer safety products such as fire extinguishers, cabinets, defibrillators, medical cabinets, and eye wash stations. The company in Natick, MA, serves medical establishments, entertainment, prisons, religious institutions, and the hospitality sector. Customers can expect unused equipment with complete factory warranties for all the products.
MKT Metal Manufacturing is an American sheet metal duct and HVAC products manufacturer founded in 2004 and based in York, Pennsylvania. The company offers various sheet metal ductwork products in different shapes and materials, as well as HVAC products and rooftop accessories that secure or protect exposed HVAC components and parts. Their products are utilized by clients in construction and architectural development, as well as in the medical and industrial sectors. MKT also provides custom fabrication services for demanding projects requiring high temperature, pressure, or corrosion resistance.
Millard Manufacturing was founded in 1971 and is based in Omaha, Nebraska. The company designs builds, and installs custom machinery, equipment, and parts, primarily for the food processing industry, to help customers achieve production yields, maintain sanitary environments, reduce costs, and improve safety. The company’s design and engineering are achieved with 3D modeling software from scratch or based on customers’ designs. Manufacturing is achieved with metals ranging from light gauge aluminum to stainless steel plate. Following installation, parts and raw materials are offered as after-market support.
Mega Steel & Tube, established in 1970, based in Gardena, California, is a manufacturer of standard and custom carbon steel products. The company’s product portfolio includes tubes, pipes, bars, perforated and expanded metal, and sheets, among others. The products are distributed in the Western U.S. and Mexico border cities. The services provided include sawing, cutting, forming, slitting and milling. The company has a large inventory on the floor with modern equipment and 10 overhead cranes with a remote control system to cover the storage warehouse and the manufacturing lines.
Meek Mirrors, LLC, founded in 1961, is a manufacturer of handcrafted mirrors, glass marker boards, shelves, and specialty products. The mirrors include lighted LED mirrors, laser etched Glass & mirrors, surveillance mirrors, demonstration mirrors, and framed & frameless mirrors used in residential and commercial facilities. The specialty products include corner guards, grab bars, sneeze guards, intubation boxes, and sanitation stations. The veteran-held company in Fort Smith, AR, offers custom manufacturing, mirror glazing options, installation, and a 12-month limited warranty for workmanship and product under normal use.
McDonald Steel, founded in 1981 in McDonald, Ohio, USA, is a manufacturer of optimal steel products, including custom forgings, rolled rings, and open die forgings. The steel products are equipped with strength, durability, and precision, making them vital components in various industries such as aerospace, automotive, energy, and heavy machinery. With state-of-the-art facilities and advanced technology, the company offers multiple steel solutions that meet the stringent demands of modern engineering. The company is ISO9001:2015 certified, and a member of the Bridge Grid Flooring Manufacturing Association.
Manly Steel is a manufacturer of custom steel and metal fabrications headquartered in Dalton, Georgia. Originally founded in 1888, the company produces various weldments and parts including machine frames, hydraulic dump truck beds, stairways, and racks for clients in manufacturing, construction, and utilities, as well as military and hospital use. The company also provides its customers with services like rolling, welding, and maintenance for steel, aluminum, and stainless products. Some of Manly Steel's client corporations include Lockheed Martin, General Electric, DuPont, and ExxonMobil.
Magnetic Component Engineering, Inc., founded in 1973, is a manufacturer of magnets and magnet assemblies based in Torrance, USA. The company provides services for the medical, defense, and aerospace industries. Their products are SAE AS9100D and ISO 9001:2015 certified. MCE's capabilities extend to research laboratories, semiconductors, telecommunications, and industrial applications. Known for unbeatable speed and responsiveness, With extensive experience, they can provide customized solutions, such as vacuum compatible systems for the semiconductor industry and critical communication links for telecommunication applications.
Mädler North America was founded in 2020 as the US-based subsidiary of Mädler which was founded in Berlin, Germany in 1882. Mädler specializes in manufacturing precision-made machine parts. Product lines include linear guides, bearings, bushes, bevel gears, worm wheels, castors and wheel systems, couplings, fastening elements, clutches, gear boxes, idlers, linear bearings, locking assemblies, machine mounts, elements for pneumatic machines various joints, rubber padding and dampers, splined shafts and hubs, sprockets, timing belts, spindles, adhesives, sealants, and other assorted accessories.
Lambert Jones Rubber Co., established in 1957, and headquartered in Pittsburgh, Pennyslvania, is a manufacturer of rubber components for various industries. Their product range includes conveyor belt, gaskets, and sheet rubber. Their products find utility in industries such as automotive manufacturing, aerospace engineering, and general industrial applications. These components are crucial for sealing and preventing leaks, ensuring efficiency and safety in machinery and equipment. Lambert Jones Rubber Co. adheres to quality standards.
KBL Cosmetics was founded in 2016 in Azusa, California, USA, as a manufacturer of personal care and cosmetic items. The company provides primary and secondary packaging, label printing, compounding, and product filling. With expertise in various container types, including tubes, bottles, and lipstick cases, it offers formulations of on-trend beauty products to meet diverse market demands. These offerings have essential functions in the cosmetic and beauty industries, from packaging for product presentation and protection to innovation in crafting unique and trend-aligned formulas. The company also offers tailored solutions that reflect the brand identity and skillful compounding for makeup formulations.
Johnson Bros. Metal Forming Company was founded in 1947 in Chicago, Illinois as a manufacturer of roll-forming machines. Today the company is based in Berkeley, Illinois, and has a much-expanded product line serving industries such as agriculture, communications, glass, sports products, and woodworking. The company’s roll-forming capabilities include compatibility with materials such as brass, aluminum, titanium, and other metals. The company is capable of manufacturing products as varied as framing, hats, wireways, tubing, and cable trays.
Isostatic Industries Inc. is an American manufacturer of bronze and TU bearing products that was established in 1982 in Chicago, Illinois. The company produces various washers, flanges, and bushings, as well as plates and bars in inch or metric standard dimensions. These are used by clients in the machinery manufacturing, automotive, agriculture, and offshore industries. Isostatic Industries also offers technical support and custom fabrication of bearings with a wide range of options for material, process, and groove style.
Infra-Metals Co., a Reliance Steel & Aluminum Co. branch founded in 1990 and headquartered in Newtown, Pennsylvania, is a manufacturer of carbon steel products. The company is also operates a structural steel service centre offering various steel processing capabilities, including drilling, saw cutting, plate cutting, T-Splitting and cambering. The product portfolio includes structural beams, pipes, solar panel mounts, angles, plates, and sheet products used in building construction, road construction (bridges and freeways), as automotive equipment, used in water, steam, and gas applications.
Industrial Magnetics Inc (IMI) was established in 1961 and is based in Boyne City, Michigan. IMI is a producer for magnetic products used in various industries such as fabrication, automotive, conveying, recycling, stamping, welding, mining & aggregate, and grain. Product offerings include magnetizers, demagnetizers, conveyor systems, magnetic conveying rail, manhole cover lift systems, raw magnetic material, lift devices, conveyor and pneumatic line magnets, magnetic inspection probes, as well as numerous magnetic tools.
Industrial Alloys Inc., is located in Sycamore, Illinois, USA, and serves as a manufacturer and supplier of metals alloys since 1969. Its diverse product selection includes steel, lightweight aluminum, corrosion-resistant stainless steel, highly conductive copper, and sturdy brass. The company offers a range of services including custom metal fabrication, plasma & Laser cutting, plate & sheet forming/rolling, angle & tube rolling, CNC machining, as well as metal distribution services. Industrial Alloys Inc., also offers competitive pricing and delivers products in accordance with customers' requirement.
Hydrasearch Company LLC is a designer and manufacturer of fluid control and transfer products for the maritime industry that was established in Stevensville, Maryland, in 1962. The company’s product lineup includes fluid control components for defense applications such as quick disconnect couplings, underwater hull penetrators, and submarine hose assemblies. It also offers recreational marine hardware such as raw water strainers, sounding tube deck fittings, and vent check valves. The company chiefly serves the defense and recreational boating industries, with additional clients in the American commercial sector.
Handles Unlimited is a manufacturer of standard and custom handles that is headquartered in Cranston, Rhode Island and was established in 1954. The company offers standard and custom handles, pulls and knobs which are utilized in the commercial, military, electronics, medical, and food service market industries. The raw material lineup for the manufacturing of the said products include aluminum, brass, and stainless steels with a diversity of finishes. The company provides a wide variety for diversified applications including contemporary handles, cord-wraps, ferrules, and folding and locking handles.
Handi-Ramp is a manufacturer and supplier of wheelchair ramps, lifts, and other accessibility products, founded in 1958 and headquartered in Hayward, California. It specializes in producing access ramps, including portable wheelchair ramps, threshold ramps, and custom wheelchair ramps. These ramps create an inclusive and accessible environment, enabling individuals with disabilities to navigate and participate fully in various aspects of life, such as homes, public spaces, and businesses. One of their featured product lines is HandiTreads, a non-slip treads and stair nosings, providing a secure and slip-resistant walking surface. Additionally, Handi-Ramp provides other industrial products, including hose/cable protector ramps, and dockboards.
Grob, Inc., established in 1929, and headquartered in Grafton, Wisconsin, is a manufacturer of custom metalworking equipment and components. Their custom products, includes band saws, cold rolled steel products, blade welders, heat exchangers, and custom machine tools, that cater to industries like industrial manufacturing, machinery manufacturing, and manufacturing. Grob, Inc. is known for their quality machines that enhance productivity and accuracy in cutting and machining processes. They are ISO 9001:2015 certified, ensuring to provide stringent quality standards and excellent industrial solutions.
Grant Steel is a manufacturer of steel products such as beams, plates, bars, pipes, and plow blades based in Holbrook, MA, and was established in 1983. More products offered include angles, cutting edges & bolts, channels, wire mesh, and expanded metals used in construction, industrial, electronics, processing, and manufacturing industries. The company offers in-house services such as shearing, painting & priming, plasma & flame cutting, holes & punching, and hole punching. The company is an AWMI, Metals Service Center Institute, and Association IOR Iron & Steel Technology member.
Gorlitz Sewer & Drain, Inc, founded in 1980, is a California-based manufacturer of sewer and drain cleaning equipment. The company’s products consist of sewer and drain cleaning machines, hoses, inspection cameras, pipe location equipment, and plumbing tools. The products range from lightweight to heavy-duty and are made from corrosion-proof steel. As such, its main consumer base is service technicians in the construction and plumbing industries for use in sewer and pipe construction and repair.
Franklin Sheet Metal, established in Franklin, Massachusetts in 1953, is a manufacturer of metal products, used in industries such as medicine, telecommunications, military, aerospace, electronics, and transportation, Their product portfolio includes sheet metal, diamond plates, flat bar beams and angles that are used as raw materials in manufacturing industries. The company also provides services such as bending and sheet metal forming, waterjet and laser cutting, painting and powder coating and design services.
Fluoro-Plastics, Inc., founded in 1951, is a manufacturer of fluoropolymer products, with its headquarters also located in Bristol, Pennsylvania. Their extensive product range includes PTFE sheets, films, rods, tubes, and custom-molded parts, as well as PTFE coatings for various substrates. These products exhibit chemical resistance, thermal stability, and electrical properties, and are utilized in industries such as chemical processing, food and beverage, medical, aerospace, and electronics. The company hold ISO 9001:2015 certification for their quality management, and USP Class VI certification.
Fluid Tech Hydraulics, Inc. has a 30-year history and is based in Sacramento, California. Fluid Tech Hydraulics manufactures, designs, repairs, and sells industrial fittings and machinery. Fluid Tech Hydraulic’s product line includes hydraulic hose & fittings, industrial hose & fittings, hydraulic hammers/breakers, hydraulic pumps, motors, and components, cylinders/rams, and industry-related tools. Service offerings include hydraulic cylinders, machine shop services, welding & fabrication, component repair & sales, hydraulic hammers, equipment repair, fabrication, & special products.
Fay Industries, established in 1985, stands as a notable manufacturer of industrial machinery components in the USA. Their expertise lies in precision-engineered gears, bearings, and shafts, catering proficiently to diverse sectors and ensuring uninterrupted machinery operations. Included within their product range are helical gears for facilitating seamless power transmission, self-aligning ball bearings aimed at minimizing friction, and robust hardened steel shafts tailored for enhanced durability, all indispensable in applications spanning automotive transmissions, aircraft engines, and production lines.
Extramet Products, LLC, founded in 1981 in Latrobe, PA, is a manufacturer of tungsten carbide in extensive ranges of applications with a global sales availability. The featured products include cutting tool blanks, engineered wear parts used in food packaging, oil & gas, medical equipment, aerospace & defence, and energy industries. The blanks are used in plant and mechanical engineering, tool dyeing, mold making, shaping, and sizing tools. The company is SRI ISO 9001 2015 certified.
EXAIR was incorporated in 1983 and based in the suburbs of Cincinnati, Ohio. EXAIR is a manufacturer of compressed air-operated products to solve problems in industrial plants. Customer solutions EXAIR addresses include cooling, cleaning, coating, conveying, drying, industrial housekeeping, static elimination, and optimization. EXAIR products include vortex tubes, air amplifiers, air knives, air-operated vacuums, ionizing products, air wipes, static eliminators, vacuum generators, vortex tubes, cabinet coolers for standard and hazardous location, cold gun air coolant systems, and other accessories.
Eagle Stainless Tube & Fabrication, Inc. (ESTF) is an American ISO 9001 certified manufacturer of stainless steel and aluminum tubing established in 1982. Based in Franklin, Massachusetts, the company offers fractional, hypodermic, and square/rectangular tubing, pipes, stainless steel wire, and bar stock in various sizes as well as grades. It also offers fabrication services such as CNC and EDM/ECG machining, bending, and laser machining for customers requiring close-tolerance parts or components. ESTF primarily serves clients in the industrial manufacturing, medical, aerospace, and energy sectors.
D & S Wire, Inc. is a wire manufacturer company located in the United States. It was founded in 1990 and is an ISO 9001:2015 Registered Company. It specializes in the production of precision wire by coil or bar products for various industries, including construction, automotive, and electronics. Its portfolio include a wide range of wire solutions, including custom wire forms, springs, and wire components, all manufactured to precise specifications.
CS Hyde, Company was founded in 1996 and is headquartered in Lake Villa, Illinois. The company is a manufacturer of high-end materials including adhesives, films, and rubber for customers from numerous industries including automotive, electronics, and large batteries. The company’s main products include pressure-sensitive tapes, silicone rubber sheets, threading, and 3D printing surface materials. The company also provides numerous services such as slitting, die and dieless cutting, sheeting, and belting. Other services include material conversion such as applying adhesives to films.
Creative Composites Group is a vertically integrated fiber-reinforced polymer composites (FRPs) manufacturer established in 2017 and headquartered in Alum Bank, Pennsylvania. The group consists of multiple composites companies specializing in products like FRP-reinforced poles and cross arms for utility companies, FRP-constructed cooling towers for industrial processes or computing, and environmentally friendly FRP-bonded bridges and crosswalks for pedestrian use. The group offers various services to clients through its subsidiary companies, such as design and prototyping, mass production, and field inspection and repair. Client corporations for Creative Composites Group include ExxonMobil, Volvo Trucks, General Electric, and Google.
Copelands, Inc., since 1968, has been a manufacturer of produced fabricated parts, machine parts, weldments and completed goods such as seal boxes, mind box dampers, rolled angle sections, fabricated reducers, and Kaydon trailers made of carbon steel, aluminum, and stainless steel. The parts are employed in hydraulic devices, construction equipment, machine tools, pollution control equipment, and natural resource processing. The company in Ooltewah, Tennessee, offers laser cutting, combination burning, plate rolling, material handling, and section rolling solutions.
Component Hardware Group was established in 1981 and is based in Matawan, New Jersey. Component Hardware Group is a global manufacturer and designer of industrial components and assemblies for industries including food service, health care, construction, commercial services, and institutions. Component Hardware Group offers casting, forging, stamping, fabrication, and other custom sub-assembly solutions for customers globally. Component Hardware Group’s 3 flagship brands are Kell in refrigeration, Flame Gard in grease filters and cooking hood accessories, and Encore in plumbing hardware.
Chlorine Specialties, Inc., founded in 1950 is a manufacturer and retailer of chlorine handling equipment for the water treatment sector based in Burlingame, California. The company’s product portfolio includes trunnions, lead gaskets, lifting gars, gas filters, and chlorine solution diffusers. The company also supplies chlorine, Anhydrous Ammonia, and sulphur dioxide specialties emergency kits containing cadmium plated tools for stopping leaks at valves, fusible plugs, and on the sides of ton cylinders.
Chicago Metal Rolled Products Co., established in 1908, is a family-owned contract manufacturer specializing in tube bending, beam bending, and pipe bending. They have multiple memberships with mental fabricating associations like AISC, NOMMA, RMSCA, Short Span Steel Bridge Alliance, STI SPFA. Bi-State Fabricators, and SMA. Their workforce and equipment serve industries like mining, construction, aerospace, and more. The company has a capacity of over 60 bending machines with two separate plants in Chicago and Kansas. Their core competency lies in bending a wide range of materials, including aluminum, carbon steel, stainless steel, and sheet metal.
Canfield Technologies, established in 1844 and headquartered in Sayreville, United States of America, is a manufacturer of solder, fluxes, and brazing alloys. The company manufactures solders, fluxes, acid brushes, and solder-magic action tins. It also produces stained glass and jewelry, plumbing solder, industrial solder, and electronic solder. The products are used for industrial, plumbing, and electronics industries. The company has passed ISO 9001:2015, NSF/ANSI Standard 61, IAPMO Research and Testing (UPC), IAPMO Research and Testing, Inc. (Low Lead), and IAPMO Research and Testing, Inc. (NSF).
Burke Forging and Heat Treating, Inc. is a manufacturer of open-die forgings, whether they are shafts, bars, or discs, established in 1987 and headquartered in Rochester, United States of America. The company provides its customers with forged discs and open die rings. It also manufactures forged bars, forged shafts, and seamless rolled rings. The markets the company caters to are mechanical power transmission, metalworking machinery, plumbing fixtures (valves and fittings), ball and roller bearings, as well as off-highway machinery.
BRT Extrusions is a manufacturer of aluminum extrusion products as well as pertinent services, established in 2005 and headquartered in Niles, United States of America. The company manufactures angles with round corners, angles with sharp corners, channels with sharp corners, tees, and structural channels. It also provides its customers with painting, fabricating, and finishing services. The company serves building and construction, electrical, transportation, and other industries. The market in the United States that it caters to is the Northeast one.
Brown Wood Inc., established in 1927 and located in Lincolnwood, Illinois, is a manufacturer and supplier of wood components and custom millwork solutions. The company operates through two distinct brands: Made To Spec, specializing in custom wood components, and Designs of Distinction, which focuses on providing architectural millwork solutions. Their product range includes decorative moldings, furniture legs, cabinet components, and more. These products are used in industries such as furniture manufacturing, cabinetry, architectural design, and interior decoration. Brown Wood Inc. is FSC certified, ensuring responsible sourcing of wood materials and sustainable manufacturing practices.
Belmont Metals was founded in 1896 as a nonferrous dealership on Brooklyn’s Belmont Avenue where it remains to this day. The company serves many industries with individualized alloys such as those for jewelry, marine applications, countertops, and babbitt bearings. The company produces alloys based on several metals including aluminum, bismuth, copper, lead, and zinc. The company also employs several other metals such as cadmium, indium, nickel, and tin in standard grades up to 99.99% purity.
Badger Meter, Inc. was founded in 1905 and based in Milwaukee, Wisconsin. Badger Meter is a manufacturer and marketer of flow measurement, quality, control, and communication solutions in the United States and globally. Badger Meter serves several industries including water treatment, water distribution, aviation, concrete production. Badger Meter offers utility water solutions and commercial & industrial solutions product segments. Together they include products such as meters, software, diagnostics, and quality monitoring.
Arnold Magnetic Technologies is a manufacturer of magnets, magnetic assemblies, and precision thin metals based in New York since 1895. The company deals in permanent magnets, flexible composites, electromagnets, magnetic assemblies, and precision thin metal foils. The permanent magnets, such as L-Type Laminated ones have various applications in the aerospace, automotive, motorsport, and industrial markets. Similarly, alloy strips and foils are used in industries that need to improve the power density of motors, transformers, and batteries. The composite sheets and strips are used for X-ray and gamma-ray radiation absorption, and RFI/EMI shielding and electromagnets are vital for defense projects.
Ameralloy Steel Corporation, founded in the year 1978, and based in Illinois, USA, is a manufacturer and supplier of ultra-tough premium alloys and services. The product portfolio includes stainless steel products, maintenance alloys steel, tools, dies, nickel alloy, and titanium. All the products are ISO certified. The products are used in various industries which include foundries, grain processing, heavy machinery, manufacturing, mining, paper, aerospace, and pharmaceutical industry. The company also provides engineering and fabrication services.
All Metals & Forge Group, LLC, was established in 1972 in Fairfield, New Jersey, US, as a manufacturer of open die forgings and seamless rolled rings. The company specializes in various metal families and alloys, including alloy steel, carbon steel, stainless steel, titanium, aluminum, nickel alloys, and copper alloys. They produce forgings that adhere to industry specifications like ASTM, AMS, AISI, Boeing, GE, and DIN. These products find applications in aircraft components, construction, power generation, medical devices, shipbuilding, industrial machinery, and defense. The company serves industries such as aerospace, automotive, construction, energy, medical, and marine.
Alabama Wire, Inc. is a manufacturer of standard and custom cold drawn wires and wireformed products, founded in 1977 and headquartered in Birmingham, Alabama. Some of its offerings include straightened and cut wire, coiled wire, wire forms, flat wire, and shaped wire. These products are used in a variety of industries such as construction, automotive, aerospace, and medical. The choice of materials is also extensive, covering the full range of low carbon bright basic, low carbon galvanized, high carbon spring wire, stainless steel, and aluminum. Many other ferrous and non-ferrous grades are available upon request.
Ad-Vance Magnetics, Inc., established in 1971, is in Rochester, Indiana, and the company is a manufacturer of custom-fabricated magnetic shields. Ad-Vance Magnetics has provided diverse bespoke magnetic shielding devices throughout its operation. The company possesses a multitude of functionalities encompassing the realm of precision sheet metal manufacturing. The company is an accredited ITAR-registered manufacturer specializing in fabricating magnetic shielding goods. Their product range contains essential components and complex assemblies, catering to various needs such as prototype parts and large-scale production runs.
A E International, founded in San Diego, CA, in 2008 is a manufacturer of valet podiums, security stations, portable bars and hostess stands. The company's product portfolio includes Steel Valet Podiums, Custom Wood Valet Podiums, Key Boxes and Valet Accessories, Custom Wood Hostess Stands and Steel Security Desks. The company serves markets such as Hospitality: Hotels, Resorts, and Restaurants, Event Venues and Conference Centers, Parking Facilities and Services and Commercial Buildings and Retail Centers.
Trident Plastics, Inc., since 1977, has been a manufacturer of sheets, shapes, rods, tubes, films, and resins made of PCTFE, polycarbonate, polyethylene, polypropylene, and Teflon to the petrochemical refining, oil and gas, fluid handling, food & beverage, and power generation industries. The Ivyland, PA, company has capabilities such as CNC routing with solid carbide, advanced cutting, line bedding, thermoforming, and profile shaping. The company is actively applying the ISO 9001:2008 Quality Management Principles.
Test Equipment Sales was founded in 1986 and is headquartered in Livermore, California. The company is a manufacturer and tester of micro-contamination and static control problems that arise in the semiconductor, pharmaceutical, medical device, and memory optical industries. The company works with customers to establish standard operating environments for cleanrooms including particle and AMC filtration, ionization, static control, lighting, air quality, and monitoring. The company’s products include modular and hard-wall cleanrooms, flow hoods, air showers, and other cleanroom components and modules.
Sievert Crane & Hoist, a Division of Sievert Electric, since 1913, has been a custom manufacturer and distributor of cranes, hoists, trolleys, and accessories such as anti collisions, below-the-hook devices, electrical power systems, radio controls for steel fabrication, metal & chemical processing, equipment maintenance, and injection molding in the aerospace, construction, military, and manufacturing industries. The company in Forest Park, IL, offers services such as inspection & maintenance, repairs, refurbishment & modifications, load testing, and laser alignment. The company has Service Disabled Veteran Owned Small Business certification.
Samco Sales Inc was founded in 1981 and is headquartered in Houston, Texas. The company is a manufacturer and distributor of industrial equipment, serving metal casting, forging, manufacturing, marine, and trucking markets. The company’s product lines also include standard and galvanized wire rope, fencing material, farming tools, and steel lock keys. The company’s metal forging services include small to medium components of steel and other alloys with several surface finishing options available.
Sabre Alloys was established in 1948 in Houston, Texas, and is a supplier of processed stainless and alloy materials along with related industrial products. The portfolio consists of 304/304L, 304/304H, 316/316L, 321/321H/ 347/347H of stainless and duplex stainless plates, and many more. The company processes and distributes petrochemicals, oil & gas, wastewater, power generation, energy, water, food, and environmental industries. Processed materials and just-in-time delivery assist the clients of the company in maximizing its productivity. The inventory and processing equipment of the company provide the client's service with shipments of standard-size materials and customer-specific cut parts.
Reliable Source, Inc. was founded in 2001 and is headquartered in Fontana, California. The company is a distributor of raw and advanced materials and subcomponents for industries including personal electronics, defense, telecommunications, and data centers. The company’s three product sectors include raw materials, manufacturing, and components. The raw materials sector includes alloys, aluminum, nickel, and titanium. The manufacturing sector includes welding, stamping, and grinding of materials. The company’s components sector includes products such as bearings, brackets, fittings, and general tools.
Regional Material Handling & Supply, Inc. is a distributor of Material Handling Equipment based in Columbia, SC, USA, established in 1984. With over 35 years of experience, Tim Owens leads the company, representing over 85 manufacturers and serving major companies in the USA. Their diverse product line includes conveyor systems, cranes, storage and shelving systems, and more. They offer turnkey solutions and hoist/crane repair services. Specializing in pallet racking, interior wire partitions, lift tables, and pallet rack safety, they cater to industrial logistics and storage needs.
Ray Murray, Inc. (RMI) was founded in 1973 and is a distributor of propane gas equipment appliances in the United States. Product categories include propane, compressed gas, hearth appliances, HVAC & heating, and outdoor living. The company’s catalog includes regulators, piping, cylinder valves, bulk plant & truck equipment, service tools, and outdoor living & heating products. The company offers additional customer resources such as product and tool installation, repair, and various customer services.
Product Electrical Corp (PECO) provides first-rate electrical components and maintenance services to various distributors in the United States, Canada, and the Caribbean. Founded in 1935, their aim is to meet customers' electrical purchasing needs, through their excellent customer service and effective distribution systems. PECO is a dependable and competent family-owned business, located in Orangeburg, New York. Their target audience includes electricians, distributors, contractors, and other independent contractors. PECO has been offering its services for almost 90 years.
ProFast is headquartered in Harrisburg, Pennsylvania. ProFast is a distributor for construction supplies. ProFast product categories include drill bits, dock/warehouse gates & rails, fasteners, jobsite supplies, ladders/scaffolding, light duty anchors, masonry, metal building components, roofing equipment, roofing material, safety, power tools, hand tools, generators, caulk/sealant, gas fastening tools, pneumatic tools, powder actuated tools, application tools, roof hatches, and skylight protection. ProFast also offers roofing safety supplies and custom Englert metal roofing options.
Power & Sons, LLC is a manufacturer of steering linkages and suspension systems, founded in 2002 and headquartered in Montpelier, Ohio. The company manufactures tie rod ends, pitman arms, forgings, idler arms, and drag links. The company offers 3D designing, prototyping, forging, machining, assembly, and product test labs. It serves the automotive industry, and won the General Motors Supplier Quality Excellence Award in 2021. It runs a research and development lab to discover ways to enhance the quality, safety, and functionality of its products.
OneMonroe was founded in the 1920s and is located in Rochester Hills, Michigan. OneMonroe is an ISO 9001:2015 and AS9100D certified global industrial manufacturing company serving several types of customers including manufacturers, distributors and catalog-houses across several vertical markets including aerospace/defense, automotive, medical, and transportation. Product lines include adjustable handles, bearings, casters, gaskets, hydraulic clamping, military spec hinges, molded rubber, piano hinges, pins, pull handles, quick release pins, seals, springs, toggle clamps, and various harnesses. Custom manufacturing is also available to meet specific customer needs.
O'Neal Steel, Inc., established in 1921 and headquartered in Birmingham, Alabama, operates as a manufacturer and distributor of metal products. The company supplies a range of materials, including carbon and alloy steel, stainless steel, and aluminum products, to businesses across the United States. Among the products offered are angles, beams, channels, bars, plates, as well as sheets, pipes, tubes, gratings, and grip struts. These products serve various industries, including construction, manufacturing, and transportation, for a multitude of applications.
New Technology Plastics was founded in 2000 and is headquartered in Westminster, California. The company is a manufacturer of high-tech plastics and a distributor of plastics and other high-performance materials serving medical, electronic, food processing, and packaging industries. The company uses custom plastic thermoforming and CNC machining to develop sheets, extrusions, tube films, and other plastics based on several material types including PVC, Teflon, glass laminates, and vinyl. The company also provides custom engineering and tooling services for customers using CAD and CAM technologies.
Nebetco Stainless Inc., established in 1978 and headquartered in Buffalo, New York, USA, is a manufacturer of a diverse range of optimal-quality stainless steel products. The product offerings include stainless steel tubes, pipes, round bars, hollow bars, and custom stainless steel solutions for residential, retail, and industrial applications. The product offerings are durable, rustproof, weatherproof, and sturdy stainless steel products that enhance both functionality and lifespan. These products find applications in various industries, such as hospitality, healthcare, aerospace, and architectural design. The company is ISO 9001, IAF, and URS certified.
Metalloy was founded in 1969 and is based in St. Charles, Illinois. Metalloy is a distributor of industrial and construction supplies. Metalloy offers tube & pipe products, PVF, die sets & plates, die & mold tooling, general tooling, steel storage, and SK hand tools. Tube & tube products include mechanical tubing, stainless steel tubing, and piping. PVF includes piping, fittings, flanges, valves, studded outlets, and machined rings. Die sets & plates include parallels, risers, and steel tools. Die & mold tooling include die punches, die buttons, drill busings, and mold components.
Kinter (K International, Inc) is a US-based retail display hardware distributor and manufacturer that has been servicing retail businesses since 1980. At its current capacity, the products range from ceiling display systems and sign holders to cables, ladderless sign hanging systems, and fasteners. The option for custom design and manufacture is also available. The company's products are used to display a variety of goods, such as merchandise information, sale signs, and inventory.
Hurlen Corp., Kenig Aerospace, founded in 1981, is a manufacturer of raw materials such as aircraft aluminum, aerospace metals, super alloys, and exotic materials such as titanium, copper, and stainless steel in the form of plates, sheets tubes, rounded bars, and flat bars for the military & defense, aerospace, and commercial aviation industries. The Santa Fe Springs, California-based company offers processing services such as sonic testing, chemical milling, water jet cutting, centerless grinding, and heat treating.
Hi-Tech Fasteners (HTF) was founded in 1988 and headquartered in Frederick, Maryland. HTF is a distributor of hardware components. HTF offers products in four product types: self-clinching fasteners such as studs and nuts, general fasteners & hardware, inserts, and components. HTF also offers a full line of PEM® Brand products including fasteners for metal sheets and panels, fasteners for BC boards and other non-ductile material, insert for plastics, bonding fasteners, rivet nuts, and fastener installation equipment.
Great Lakes Industrial Supply Co. (Great Lakes) is a family business originally founded in 1954, operating out of Dearborn Heights, Michigan. Great Lakes is a distributor for industrial and contracting supplies including cutting tools, mechanic tools, power tools, and safety items. Some of the types of cutting tools Great Lakes offers include drills such as jobbers and roto hammers, taps, reamers, and dies. Mechanic tools include rachets, drivers, and sockets. Power tools include offerings from companies such as Makita and Milwaukee.
Elite Restaurant Equipment was founded in 2013 and headquartered in Newark, New Jersey. Elite Restaurant Equipment is a distributor of restaurant equipment and supplies. Refrigeration equipment includes reach in refrigerators, refrigerated prep tables, refrigerated display cases, merchandising refrigerators, and undercounter refrigerators. Commercial work tables include stainless steel work tables, butcher block work tables, and equipment stands. Commercial sinks include 1-3 compartment sinks, underbar sinks, and faucets. Some additional offerings include various shelves and shelving, exhaust hoods, fryers and ranges, steam tables, chairs, booths, and other restaurant furniture.
Eastern Steel Corp., founded in Brooklyn, NYC, in 1924 is a manufacturer of steel products such as pipes, sheets and plates. The company's product portfolio includes steel sheets and coils in various thicknesses, steel pipes and tubes are suitable for structural, industrial, and commercial purposes, steel bars and rods and steel structural components. he company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company provides services such as Product Selection Guidance, Engineering Support, New Product Design and Development and Custom Manufacturing.
Distributor to Industry, inc (dti) is based in Wichita, Kansas and has a history as a distributor going back over 40 years serving the oil drilling, rig, workover rig, and oil well pulling unit industries. dit offers 5 primary product categories: adhesives and sealants for aerospace, automotive, and industrial applications, air valves for marine, mobile, & oil field industries, air valves couplings & manifolds, pneumatic/hydraulic fittings & couplings, and fluid power process instrumentation & process control equipment.
Colonial TelTek was founded in 1972 and operates in King of Prussia, Pennsylvania. Colonial TelTek is a division of Colonial Electric Supplies. Colonial TelTek primarily serves the telecommunications and utility industries as a parts distributor and emergency service provider. Colonial TelTek is offers 8 major product lines including aerial hardware components, bridge conduit systems and conduit accessories, fiber optic cable and splice accessories, handholes and racking products, pulling products, PVC, HDPE, and fiberglass conduit, as well as tools and accessories.
California Metal & Supply, Inc., founded in 1984, and headquartered in Santa Fe Springs, California, is a manufacturer, distributor, and supplier of quality metals and alloys. The company offers a range of products, including titanium, Inconel, nickel, aluminum, and stainless steel which caters to industries such as aerospace, defense, and industrial markets. Their products are used in for making rocket engines, spacecraft, launch vehicles, satellites, and support ground equipment. The company is also AS 9100D/ISO9001 Certified through NSF-ISR.
Bunting Bearings, LLC, established in 1907 and headquartered in Holland, Ohio, is a manufacturer of bearing solutions for industrial markets such as marine, mining, and medical. Its products include a wide range of bronze alloys, including lead-free, powdered engineered metals, and plastic products made from quality metals and polymers. Some of its offerings are cast bronze bearings, lube-align mounted bearings, and plates. Its products are sold directly as well as through a nationwide network of distributors and metal service centers.
Boone Steel LLC was established in 1977, and is based in Cincinnati, and Northern Kentucky, and is a supplier of small and large quantity metal purchases and services. The portfolio includes Angle, Architectural Angle, Bar, Beam, C1018, and many more. The extensive industrial metals the company uses include, hot rolled, cold finished, tool steel, brass, aluminum, etc. Not only the company has a sizable selection of forms, such as drill rods and brass bars, the metal professionals can also give the clients a wide choice of solutions for metalworking and shaping services.
Bergsen, Inc, since 1974, has been a distributor of metals such as carbon steel, aluminum, stainless steel, and saws. Metals are available in hexagonal, round, square, flat, and custom extrusion shapes and are used in the surgical, oil and gas, aerospace, electronics & sensors, automotive, and machining industries. The Santa Fe Springs, California-based company offers heat treatment furnaces, saw cutting, trepanning, centerless grinding, and lathe turning. With blind shipments, boxing, scheduling common carriers, and packing for UPS/FedEx, the company can ship same-day.
American Surplus Inc (ASI) was founded in Rumford, Rhode Island in the early 1990s. ASI is a distributor of both new and used material handling equipment and warehouse equipment and also purchases used equipment. ASI specializes in distributing both new and used pallet racks, conveyor systems, mezzanines, industrial, and other warehouse equipment. Other offers include cantilever racks, dock equipment, floor scrubbers, flow racks, forklifts, inplant offices, industrial cabinets, industrial containers, lift equipment, lockers, packing equipment, pallet racking, scales, and pick modules.
All Metal Sales, Inc. is headquartered in Westlake, Ohio, with processing and distribution based in Cleveland, Ohio. The company is a manufacturer of non-standard and custom-made items often used in the aerospace, energy, military, petrochemical, and science industries. Customers include Boeing, Eaton, NASA, Philips Healthcare, and SpaceX. The company offers a full range of services and capabilities including heat treatment, straightening, plasma cutting, and ultrasonic testing. The company’s capabilities include a vast number of standard and specialty metals including Rene 41, tungsten, cobalt, and others.
Aero Assemblies was founded in 1932 and is headquartered in Burnsville, Minnesota. The ISO 9001:2015 certified company is a distributor of hardware components used in aviation, construction, marine, and other industries. The company’s primary products include rope, fasteners, fittings, power tools, and aircraft cables. The company’s services include custom wire rope assemblies, push-pull control assemblies, garage door assemblies, and eyelet installation services. The company works with customers to create new tools for many types of needs.
Advantage Metal Services, Inc. was founded in 1985 and is based in South El Monte, California is a custom fabrication manufacturer and distributor of metallic products for industries including food processing, paper, agriculture, and construction. The company offers shipping to many locations and free local delivery. The company’s services include custom metal fabrication, custom screw conveyor production, flame & hi-definition plasma cutting, saw cutting, and shearing. The company’s end products include carbon steel, stainless steel, aluminum, and expanded metal.
Addison Building Materials was founded in 1947in Arlington Heights, Illinois. Addison has over 38,000 items in stock across departments including lumber, building materials, hand tools, power tools, electrical, fastener, paper products, SOG Knives, janitorial, clothing, ice & snow, automotive, and audio-visual departments. In addition, Addison offers various services including custom orders, local delivery, rental program for contractor and industrial tools and equipment, lumber cutting, pipe threading, and paint color matching.
Alloys Inc. was founded in 1978 and is based in San Diego, California. Alloys Inc is a custom manufacturer and distributor of metals in all standard alloys and shapes, serving ship building & repair, heavy equipment, defense and government, construction & architectural, buildings & structures, and industrial manufacturing industries. Alloys Inc. offers services to fabricate products to custom specification using methods such as shearing, flame cutting, plasma cutting, heat treating, welding, machining, forming, punching, band saw cutting, waterjet cutting, drilling, and sawing. Alloys Inc also supplies standard metals and drywall framing systems.
Pollak Corporation was established in 1909 as a tool and die shop in Boston, Massachusetts. In 2019, Pollak Joined Standard Motor Products and expanded its product offerings. Today, Pollak provides custom design, test, and manufacturing for automotive, agricultural, construction, and marine-related industries. In the company’s ISO 9001/QS9000 certified facilities, the company advances customer requests from the concept stage through testing, initial production, and all the way to volume production. The company’s existing customers include Ford, General Motors, PACCAR, John Deere, and Caterpillar.
North American Signal manufactures truck, auto, and industrial warning lights and accessories. Established in 1962 by Julius Newman and partners, NASAG was originally based on North Pulaski Road, Chicago, but is now based in Wheeling, Illinois, with a 45,000-square-foot warehouse. From LEDs, strobe, and battery-powered portable lights to revolving and specialty options, NASAG designs and manufactures warning lights to suit nearly any application. Besides truck and automotive, North American Signal Company also serves industrial markets such as construction and law enforcement.
World Wide Metric was founded in 1970 and is based in Branchburg, New Jersey. World Wide Metric is a distributor of products for the global maritime & industrial flow control and fluid power markets. World Wide Metric products include valves in DIN, JIS, and ANSI standards, fittings such as hydraulic, JIC flared, ORFS, and BSP adapters, flanges, tubing, coupling, expansion joints, tube clamps, gaskets, marine firestop, RM pressfit & drain, and other industrial products.
Westerfield Sales and Services (Westerfield) was founded in 1946 in Old Brooklyn, Ohio. Westerfield is stocking caster distributer. Westerfield’s online store offers casters of a number of materials and styles including iron, hard rubber, phelonic, pneumatic, carefree, rubber, polyurethane, TPR, ductile steel, and poly on poly Westerfield also stocks other equipment such as E-tracks, straps, dollies, rubber bands, E-track load bars, furniture dolly carpet ends, hoop kits, tie offs, load bars, panel carts, platform trucks, pry bars, and shelf carts.
Rembert Co., Inc. has been a distributor of material handling equipment since 1938, based in Columbia, SC, USA. The company provides a wide range of products, including shelves, lockers, racks, cabinets, mezzanines, and more. Their services include design and installation services, catering to industrial and commercial applications. They supply products made of plastic, fiberglass, steel, and corrugated materials, for durability and reliability. With over 150 years of collective experience and a Thomas verified supplier certification, their line card offers quick quotations, freight estimates, on-site appointments, and full turn-key installation solutions, addressing all storage and material handling challenges.
Sutton Garten Co.’s history dates back to1916 in Indianapolis, Indiana. Sutton Garten is an independent welding distributor, providing products and services. Sutton Garten’s product offerings include welding abrasives, dry ice & blast equipment, electric welding equipment & supplies, filler metals, flux and chemicals, fume extraction equipment, gases, cylinders, dewars, gas equipment for welding, welding hand tools, plasma cutting equipment, metal cutting sawing grinding tools, welding safety equipment, and weld accessories. Sutton Garten’s service offerings include bulk gas installations, carbon dioxide gas fill service, rental welding & cutting equipment as well as repairs.
Supply Solutions was founded in the early 2000s and operates out of Stonewood, West Virginia. Supply Solutions is a wholesale distributor serving the telecommunications industry, including traditional CATV operators, independent telephone companies and FTTX providers, as well as the contractors that support these operations. Supply Solutions offers hardware including aerial hardware including sub-components and parts,, cables, conduits, fiber optics, power supplies, sealants, test equipment, drop & instillation products, FTTX equipment including optical enclosures, headend products, underground equipment, wireless equipment, poles, as well as test equipment.
Stock Car Steel & Aluminum, Inc. was founded in 1996 and is the primary supplier of Metal and Plastics to NASCAR race teams. The company is a Full-Line Steel Service Center with several shapes, sizes, grades, and types of plastics and metals. Stock Car Steel & Aluminum also serves several other markets including Machine Shops, Manufacturing companies, and Marine and construction industries. The company also cuts to specification and supplies other products such as adhesives & sealants, clamps, fluids, and chemicals.
Standard Metals, Inc., founded in 1978, is a supplier of alloys, including wrought alloys, cast alloys, federal specification, and custom alloys in the form of rods, sheets, bars, and plates. Precision plate saws and horizontal band saws for multi-cutting are made. The products are used in automotive engineering, aerospace, industrial, military, and manufacturing industries. The company in Ledyard Street Hartford, CT, offers services such as water cutting, precision machining, and specialization for insulation. The company is MIL-I-45208A approved and provides test reports with no minimum order.
Sequoia Brass & Copper Inc. is a supplier of nonferrous metals based in California since 1983. The company supplies Oxygen-Free Copper in the form of plates, rods, sheets and tubes. It also deals in Brass which is extensively used for musical instruments, and also in architecture, automotive, and electrical industries. Bronze is available in solid bars and cored bar shapes, and is widely used in architectural, industrial, agricultural, and automotive applications. Besides these, other non ferrous metals and copper alloys can be ordered from Sequoia Brass & Copper Inc.
Ryerson Inc., founded in 1842, is an online metal supplier of steel, aluminum, stainless steel, and alloys; it also does sheet & coil processing, tube & structural processing, plate processing, and supply chain services. Headquartered in Chicago, the company has over 100 locations throughout North America and beyond to serve the heavy equipment, horse & cargo trailers, aerospace, and oil & gas industries. The company offers tax-exempt certificates on qualifying metal inventory, metal-related services, and machinery sold to them: the Virtual Payment Program and a partnership with Bank of America to facilitate post-invoice payment to the company.
Ryan Herco Flow Solutions was founded in the 1950s in California. RHFS sells and provides value added support for a wide variety of fluid handling and filtration needs. Product categories include tubing, hoses, piping, drain waste vent & containment, valves, measurement & control devices, fluid pumps, filters & housings, storage & containment tanks, heaters, mixers, and grating in addition to customized systems and material fabrication. Value added services include industrial service and repair of components, custom fabrication, and pump repair services.
Rudy and Associates, founded in Kennedale, TX in 1972 is a supplier of metal tubing. The company's product portfolio includes carbon tubing, alloy tubing, high temperature tubing, titanium and stainless steel tubing. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company provides services such as Product Selection Guidance, warehousing and distribution, Engineering and Customer Support and Custom Manufacturing.
Paragon Steel, founded in 1988 in Long Beach, California, is a distributor specializing in supplying metals including Stainless Steel, Aluminum, and more. The company’s product portfolio includes WF Beams, I-Beams, Stainless Steel, Aluminum, and more. They also offer services such as flame cutting, forming, cutting, shearing and water jet cutting. The company offers custom packaging and marking, just-in-time programs and ensures compliance with federal and state regulations. They serve clients across industries including aerospace, power generation, and manufacturing sectors.
Orr & Orr, Inc. has been offering wholesale distribution services since 1934 out of Bedford Park, IL. Orr & Orr emphasizes speed of order processing, shipping, and both customer and distributor satisfaction. Product categories that Orr & Orr offers include air conditioners, brake controls, cargo restraint equipment, door tracks, lighting equipment, fans, gas springs, heating equipment, hinges, plumbing supplies, seat belts, steps, toolboxes, hitch and towing products, various truck hardware, cables, battery products, safety equipment, and spring latches.
Omni Steel Supply, founded in Jamaica, New York in 2011 is a distributor of steel and steel services. The company's product portfolio includes Custom Metal Fabricators, Custom Fencing Fabrication, Steel Rebar Fabrication, Aluminum Welding services, and Steel hardware. They offer services Steel Services: such as Steel slitting and shearing to meet specific size requirements, Precision steel blanking and leveling for superior flatness and Steel processing. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building.
Mokawa, Inc., a subsidiary of E. Wagener, is based in Florida, United States. The company specializes in the acquisition and fabrication of refractory, special, and rare earth metals. Mokawa's range of rare earth metals includes Chromium, Cobalt, Gold, Platinum, and Titanium. The company also offers the processing of metals into custom components which can be made from metals such as niobium, tantalum, tungsten, and their alloys. Mokawa provides material testing services and all orders come with material composition reports.
Modulex Partition Corp., founded in 1968 and headquartered in Hillside, New Jersey, is a distributor of toilet partitions, bathroom accessories, and other specialty building products. The company's range of products includes, toilet partitions, bathroom accessories, lockers, fire extinguisher cabinets, and projection screens, which are used in industries such as commercial, institutional, industrial, and healthcare facilities. Its products are used for privacy in public restrooms, enhance restroom functionality, offering secure storage, and displays for visual content in various settings.
Miracle Welding, Inc. is an American supplier of metal and welding services based in Franklin, Ohio and founded in 1978. The company specializes in MIG, TIG, and arc welding, operating under standards established by the American Welding Society and working with aluminum, steel, stainless steel, and cast iron. Metal products they provide include beams, pipes, sheets, and industrial stair and railing components and they offer welding services to aerospace, construction, machine building, transportation, and OEM industries.
Metal Suppliers Online, founded in Hampstead, NH in 1955 is an industrial metals website that is connecting buyers and sellers of raw materials. The company's product portfolio includes metal databases, Metal Expertise and Insights, informative resources, articles, and blogs related to metals. On their website they provide, a selection of metals that ensures that customers can find the right materials for their projects, source metals from reputable suppliers and adhere to strict quality standards and customized solutions.
Mega Mex, established in 1990 and headquartered in Humble, Texas, is a distributor of specialty metal alloys for the manufacturing industry. Its offerings encompass Hastelloy, Monel, Inconel, Incoloy, stainless steel, and more. The company has served the markets in Mexico, Central, and South America, which enables them to efficiently manage the complexities of moving products from the USA to international customers. Its products are utlized acrooss diverse manufacturing sectors, providing essential metals crucial for building durable, corrosion-resistant components that drive industrial production, ensuring quality in various manufacturing processes.
MAX-Ability, Inc., established in 1993, is an American distributor headquartered in Santa Rosa, California, specializing in restroom solutions. The company's offerings are designed to increase restroom accessibility, safety, and convenience for the elderly, special needs children, and wheelchair users. Among the products offered are adjustable bathroom and restroom features, as well as changing tables catering to infants, children, and adults. The company's products have been installed in major airports and public venues in the United States, such as Los Angeles International Airport, California, O'Hare International Airport, Chicago, Illinois, and Kansas City Zoo, Missouri, as well as educational institutions and special needs facilities.
Mark Metals, established in 1990 and situated in Reading, Pennsylvania, serves as a supplier and distributor of metals and custom metal fabrications. The company maintains a standard inventory of metal supplies, including metal plate, sheet metal, angles, beams, channels, as well as threaded rod, handrails, rebar, and more. These offerings cater to industries such as construction, manufacturing, transportation, energy, and medical. Its products are designed to meet diverse project needs, spanning from prototype parts to keyed shafts, construction supports, and large-scale sign frames.
Interstate Products, Inc. was founded in 1996 and is headquartered in Sarasota, Florida. Interstate Products is a distributor of environmental, storage, and safety product solutions to help customers comply with stringent EPA, OSHA, DOT, and military regulations as well as improve on environmental storage solutions. The company’s products are also often used in disaster cleanup and relief efforts around the globe. The company has many product categories ranging from aqua bags to material handling to welding equipment but specializes in safety cabinets, spill containment, and storage tanks.
Intermet Metals Services, Inc., located in Schaumburg, IL, is a distributor of specialized custom brass and bronze alloys, established in 1985. The alloys include manganese bronze, nickel silver, aluminum bronze, aval brass, and silicon bronze for bushings, bearings, actuators, cam follower pins, and valves in marine, military, aircraft, petroleum, and automotive industries. The alloys meet the quality standards of ISO 16949:2009, 14001:2004, 9001:2008, and OHSAS 18001:2007. The company is the exclusive distributor of INTERBRONZE Bronze and Bronze Alloys.
Goodfellow was established in London, England in 1946. Goodfellow is a distributor of metals, alloys, ceramics, polymers, and compounds for scientific and academic research, manufacturing, and design industries. Goodfellow products are ISO 9001:2008 accredited. Goodfellow provides services, custom manufacturing, and standard supplies for customers. Service includes access to its knowledge base as well as technical expertise. Custom manufacturing is available for different cycles of manufacturing, precision machining forming, coating, and surface treatment. Standard supplies include access to over 150,000 in-stock advanced scientific materials.
Facilities Engineering, founded in 1968 and headquartered in Anaheim, California, is a supplier of overhead material handling equipment. Their product range includes bridge cranes for lifting heavy objects, hoists for moving lighter loads, monorails for transporting materials along specific paths, and conveyors that move materials on continuous belts. Additionally, they offer custom-designed material handling systems tailored to meet the unique requirements. The company holds OSHA certification and a Class A contractor’s license.
Diamond Needle Corp is the North American distributor for Organ Needle Co., LTD of Japan. Diamond Needle Corp is a supplier of sewing supplies and materials. Individuals and industries served include apparel, automotive, bag closing, bookbinding, embroidery, filters, furniture, home fashions, industrial textiles, mattresses, non-woven, quilting, and other special applications. Diamond Needle has over 100,000 parts and supplies available including needles, replacement parts, scissors, lubricants, chemicals for cleaning and adhesive use, specialized tools, drive belts, crayons, markers, safety aids such as gloves and needle protection, and electric busways.
Commercial Metal Exchange, founded in 1984, is a supplier and distributor of metals, alloys-tempers, and forms of stainless steel, nickel, aluminum, copper, and bronze as sheets, rods, coils & strips, bars and tubes used in art sculpture, automotive, government & military, machine shops, roofing contractors and construction industries. The company in Warminster, PA, ensures that the products meet ASTM, AMS, ASME, SAE, and federal standards specifications. The company has no minimum order size and takes one to two days to ship and deliver a product.
Capital Machine Corporation was established in 1946, in California and is known as a supplier of machining services. Besides providing general machine and industrial repairing services the company also offers welding procedures including MIG, TIG, Stick, and Wire GAS, along with the fabrication of Custom Sheet and Structural Metal. Their services list also includes reconditioning, repairing, and rebuilding all types of Gearboxes, Locomotive Turntable Trucks, Drives, and Bearings along with repairing industrial pumps and manufacturing pump components for brands like Worthington. Numerous industries are served by Capital Machine, some of them being Steel Processing, Plastics, Agriculture, Mining, and more.
Beartech Alloys was founded in 1997 and is headquartered in Placentia, California. The company is an operated metal distributor and metal service center, focusing on specialty alloys such as stainless steel, nickel, bronze, and copper. The company stocks those alloys in bars, tubes, pipe, angles, sheets, and other shapes. The company also works with several mills, foundries, and other distributors to maximize the speed of service for customers. The company also provides heat treating, precision saw cutting, grinding, and polishing services.
B & S Aircraft Alloys was founded in 1979 and headquartered in Syosset, New York. The company is a distributor of precision parts and titanium, nickel, aluminum, stainless, and commercial alloys to customers in the aerospace as well as medical, scientific, petrochemical, and industrial industries across the United States. The company meets with certifications for military and other specifications and supplies customers such as Boeing, NASA, Honeywell, and General Motors. The company provides parts and service for several aircraft including commercial 737s and military F-15s.
B & B Electroplating Co., Inc., established in 1960, based in Linden, New Jersey, is a supplier of metals used in plating services. The company provides many plating services, including the use of tin, nickel, rack and barrel, and silver. It also offers both bright and matte tin finishes, as well as matte silver finishes. It's services are provided to electrical and electronics industries. The company’s customer base includes Siemens, Cutler-Hammer-Eaton, and General Electric, as well as smaller companies in the local manufacturing sector.
Atlas Bronze was established in 1994 in Trenton, New Jersey. The company is a US brass bronze supplier that is operated by Maranatha Now, Inc. Its products are bronze, copper, iron, self-lubricated bushings, and wear plates. They are available in custom and standard sizes, including solid diameters, cored bars, plates, and rectangle blocks. Atlas Bronze’s products are applied in multiple areas, such as the aerospace, architectural, manufacturing, energy, and defense industries. Commonly, they’re found as gear bearings, joints, marine equipment, pipes, and railroad parts.
Aluminum Distributing, Inc. (ADI Metal) was established in 1958 in Fort Lauderdale, Florida where it is still headquartered today. ADI Metal is a distributor of metal and metallic materials for both private and public industrial and maritime industries both in the United States and abroad. ADI Metal is ISO 9001:2015 certified. ADI Metal’s product segments are split into aluminum alloy products, stainless steel products, and other ferrous and non-ferrous metals. These metals include armor plating, brass, bronze, carbon steel, copper, cupronickel, and titanium.
AIRMATIC was founded in Philadelphia in 1944. AIRMATIC serves a many industries including cement and concrete, oil, gas, energy, biomass, chemical products, feed & grain, food manufacturing, glass & ceramics, and clay. For these industries, AIRMATIC provides installation, maintenance, fabrication, silo cleaning, inspection, and repair, as well as repair and rebuilding of power tools. AIRMATIC also has an extensive lineup of products for sale including air cannons, automatic lubrication systems, belt conveyor components, flow detectors, finishing equipment, safety equipment, industrial vibrators, railcar openers and unloading equipment, rebar tools, valves and actuators, and mechanical force exciters.
Aero-Vac Alloys & Forge, Inc., founded in 2008 and located in Kalama, Washington, operates as a stocking distributor of a diverse range of specialty metals and alloys. Its extensive product lineup encompasses stainless steel, steel, aluminum, titanium, nickel, as well as beryllium copper, and more. The company boasts an array of capabilities, including saw cutting, turning, grinding, heat treating, trepanning, as well as boring, honing, and testing. Catering to industries like aerospace, defense, racing products, and power generation, the company provides expedited order fulfillment, often delivering orders within 2-4 weeks. Additionally, next-day availability for in-stock materials are also ensured.
Aero Industries has been a supplier of composites and parts made from stainless steel, plastic, high-temperature metals, titanium and pure metals, since 1980, in Orlando, OL. The company specializes in aircraft parts, raw materials, and manufactured parts used in medical, marine, gas turbine, military, and commercial industries. The company is ISO 9001:2015 and AS9100D certified, a proven supplier of Northrop Grumman, Boeing, Rockwell, and General Dynamics, and its sales personnel have won quality awards.
Admat, Inc. is an American supplier of refractory metals established in 1997 and based in Norristown, Pennsylvania. The company's product inventory includes refractory metals such as tungsten, niobium, titanium, and molybdenum in various forms for utilization in the industrial sector. These include rods, tubes, sheets/plates, and wire, as well as thin films and capacitors. Admat also provides custom machining and fabrication services for their clients in semiconductor production, chemical processing, and the defense industry.
AAA Metals Company Inc., established in 1978 in the USA, is a distributor of stainless steel, superior nickel alloy, titanium, and other hard-to-find metal products worldwide. The company specializes in face-and-edge polishing, laser cutting, water jet cutting,rolling, and forming, serving the construction, aerospace, medical, pharmaceutical, aircraft, and biotech industries. AAA Metals Company Inc. has supplied products that have been used in the Yankee Stadium in New York and the Fenway Park baseball stadium in Boston.
Source Equipment Company, Inc. was established in 1989 and headquartered in Leominster, Massachusetts. Source Equipment Company is a solution provider in warehousing, distribution management, and equipment sourcing. Source Equipment Company’s extensive catalog includes bins, boxes, cabinets carts, casters, chairs, containers, conveyors, cranes, barriers, dollies, doors, dumpers, hoppers, lifting equipment, office furniture, pallets, partitions, platforms, racks, safety equipment, scales, security equipment, trucks, wires, work benches, and other warehouse equipment including access equipment such as stairlifts, wheelchair lifts, ramps and residential elevators.
Chandra Industrial Works, founded in 1965 and based in Kolkata, India, is a manufacturer and supplier of railway tools and components. The company produces railway accessories, railway tracks, P way tools, fittings and allied products. Some of these products are fish bolts and nuts, railway screw, dip lorry, push trolley and ground lever frame. The infrastructure includes an R & D and quality testing unit along with a manufacturing and warehouse unit, connected with a transportation network to deliver the ordered consignments. The company is ISO certified and has a team of quality controllers to ensure the compliance with international quality standards.
The Global Merchants, founded in 2008 and headquartered in Jalandhar, Punjab, India, is a manufacturer of professional vices and tool bags. The company offers a diverse range of products, including bench vises, anvils, pipe vises, woodworking vises, and heavy-duty tool bags. These optimum-quality vices and tool bags are crafted to provide durability, precision, and convenience to professionals in various trades. The products find applications in industries such as woodworking, metalworking, plumbing, construction, and automotive repair. It is ISO 9001, CE certified and operates globally as a major supplier of customized and rugged industrial tools and vices.
JF Tools, established in 1947, and based in India, is an ISO 9001:2015 certified manufacturer, exporter, and supplier of hand tools. The company offers an extensive range of products, including spanners, pliers, vices, hammers, wrenches, and leather tool pouches. These tools are crafted in their advanced manufacturing unit by a skilled team. JF Tools' precision-engineered hand tools find diverse applications in the construction, automobile, engineering, furniture, and home furnishing industries. They have served over 1000 clients from more than 35 countries.
Hangzhou Zhezhong Chain Co., Ltd., founded in 2006 and located in Hangzhou, China, is a manufacturer of heavy lifting, and material handling products. The company specializes in producing an assortment of premium hoists and chains, such as roller chains, conveyor chains, agricultural chains, and engineering chains. The chains' strength, accuracy in engineering, and resilience to wear and tear make them useful for application in an array of industries. These chains are frequently used in mechanical chores in the construction, agriculture, manufacturing, automotive, and transportation industries. It has ISO 9001 certification and is engaged in rigging and marine machinery.
MarsMetal Specialty Casting, based in Burlington, Ontario, has been a manufacturer and supplier of heavy tungsten, sheet lead, lead materials, counterweights, and test weights since 1979. The company manufactures ASTM B-29, B-749 and Federal QQ-L-201F, QQ-L-171E- compliant sheet lead used for sound barriers, roofing, flashing, waterproofing, and radiation shielding.The company also manufactures lead bricks, elevator cart weights, aerospace test lead weights, extruded lead bars and pipes. The company earned its 1SO 9001 certification in 2015 and is CSA-certified caters to nuclear energy plants, healthcare, construction, and aerospace applications.
Kingeragrico Pvt. Ltd, established in 2003 and located in Chattisgarh, India, is a manufacturer of advanced agricultural machinery. The company specializes in producing a diverse range of products, including shovels, ploughs, seed drills, mattocks, and irrigation systems. These advanced agricultural machines are designed to enhance productivity, reduce labor, and optimize resource utilization for farmers. The products find applications across various agricultural sectors, benefiting farmers engaged in crop cultivation, soil preparation, and irrigation, providing farmers with the tools needed to achieve optimum yields and sustainable farming practices.
EquipmentsMachinesUAE, established in 2009 and based in Dubai, United Arab Emirates, is a manufacturer of industrial equipment, and machinery tools. The company specializes in the manufacture and distribution of a diverse range of industrial equipment and machine tools, including metalworking machinery, welding equipment, material handling solutions, and CNC machining centers. The products are used for precision, stability, and advanced features, which enhance productivity and efficiency for businesses. It caters to a wide array of industries, including manufacturing, military, automotive, the food industry, and aerospace, providing essential tools and equipment required for various applications.
JRS Drive is an American manufacturer of hand tools established in 1989 as a subsidiary of the Indian company Eastman Cast & Forge Ltd. Based in Westerville, Ohio, the company produces various metalworking, masonry, woodworking, and plumbing tools, such as wrenches, hammers, pliers, and chisels. It has an annual manufacturing capacity of over 24 million products. JRS Drive primarily serves clients in the construction, automotive, and furniture manufacturing industries. The company also offers additional OEM and custom packaging services for unique customer projects.
Aggarwal Steel and Aggarwal Tools & Forging is a manufacturer of Industrial and Machinery tools in Jalandhar, India, since 1994. The company designs and manufactures various hand tools which include striking tools such as crowbars, chisels, pry bars, nail pullers etc. There are also Hammers and Axes, Pliers and Pincers, Truck spanners, and vices available in swivel and fixed bases. Some of the products have specific applications such as the heavy-duty sledge hammer can be used on concrete and stone, the heavy-weight club hammer is used for light demolishing work and the other tools have widespread use in construction and mining.
Yangtze Railroad Materials, established in 1989, is a manufacturer and supplier based in Rosedale, Maryland, specializing in fasteners and fastening solutions for the railroad industry. The company offers standard and custom-made ferrous, nonferrous, and special alloy fasteners. Their product portfolio includes fasteners, rail clips, joint bars, spikes, and more. They also offer standard and custom castings. The company holds ISO 9001:2015 certification and has an Underwriter Lab-audited quality program for their products, programs and services.
Valley Design Enterprises, Inc. (VDE) is an American manufacturer of table base components established in 1987 and based in Fountain, Minnesota. The company produces various table base functionality products such as flipping and folding mechanisms, components for wire management, and components with adjustable or fixed heights for client manufacturers of furniture. VDE products are available in a wide selection of finishes, including solid matte or glossy colors and textured metallics. The company chiefly serves clients in agriculture, construction, and transportation.
Tencom Ltd., founded in 1997 and headquartered in Holland, Ohio, is a custom manufacturer specializing in the pultrusion process to create fiberglass-reinforced products. Its used technique results in components with a strength comparable to steel, offering superior impact resistance compared to traditional metallic manufacturing materials. Tencom's array of offerings includes corrosion-resistant and lightweight solutions, electromagnetic transparency products, high-strength components with consistent cross-sections, and electrically insulated items renowned for their exceptional dimensional stability and thermal insulation. These solutions find extensive application in the construction, manufacturing, and transportation sectors.
Technic, Inc. was founded in 1944 and is headquartered in Cranston, Rhode Island. The ISO 9001:2015 certified company is a manufacturer of specialty chemicals, surface finishing equipment, and analytical tools used in electronics, industrial, semiconductor, and solar industries. The company’s Automated & Manual Equipment division produces automated processing equipment, manual finishing equipment, anodizing equipment, and parts and supplies. The company’s Engineered Powders division offers a range of materials including powder and flake from silver, gold, palladium, and other metals.
Rose Metal Industries, LLC, established in 1904 and located in Cleveland, Ohio, is an American manufacturer specializing in fabricated metal assemblies. The company offers custom industrial metal fabrication, including laser and plasma cutting, as well as robotic metal inert gas (MIG) and tungsten inert gas (TIG) welding. Additional fabrication capabilities include drilling, milling, boring, and sawing. The company also offers industrial blacksmith forging, which includes hot bending, twisting, and hot forming of torsion bars. It also utilizes tools such as style 901 tongs, typically in rolling mill applications. These services applies to various metals, including steel, stainless steel, and nickel alloys.
N.J. Sullivan Co., Inc. (NJSC) is a private manufacturer of electrical construction equipment based in Dulles, Virginia. Established in 1958, the company transitioned from a small machine shop to a specialized producer of bolted pressure switches, junction boxes, bussed troughs, and electrical enclosures for use in data centers, electronics, utilities, and construction. The company offers various services to its clients, including metal fabrication and finishing, precision sheet metal machining, and powder coating. NJSC operates out of a 52,000-square-foot facility and chiefly serves the military, defense, and aerospace industries along with large contractors and Fortune 500 companies.
Metalor Technologies USA, established in 1852 in North Attleboro, Massachusetts, USA, is a manufacturer of advanced materials for various industries, including electronics, jewelry, and automotive. The company manufactures a diverse range of products, such as precious metal compounds, flakes, plating solutions, palladium, and optimal-purity metals. These products come with robust quality, temperature resistance, and purity, making them ideal for critical applications in electronics manufacturing, jewelry fabrication, and automotive components. The powders and flakes manufactured are used in special ink and paste formulations for microelectronic applications. It is ISO900, 14001, and 45001 certified, and a member of Responsible Jewelry Council.
Macuch Steel Products, Inc., founded in 1948, is a manufacturer of carbon steel, aluminum, and stainless steel staircases, rails, anchor bolts, embeds, and metal grating. The industries that employ the items include residential, commercial, environmental, industrial, and construction. The Augusta, Georgia-based business offers structural steel fabrication, steel erection, detailing, cost-effective pricing, and capabilites for sawing, cambering, automated drilling, stud welding, and plate burning. The business belongs to the Carolinas Associated General Contractors, Southern Association of Steel Fabricators, and Steel Plus Network.
Innovative Components is a manufacturer of custom plastic injection-molded and CNC-machined parts based in Schaumburg, Illinois. Founded in 1992, the company produces various mixed material products such as clamping knobs, fasteners, thread identifiers, and handles. These are used in industrial equipment, machinery, medical instruments, and office supplies. The company offers a wide range of services to clients including design and prototyping of custom parts or components, mold making for plastic injection purposes, and laser etching of custom fabrications. Innovative Components products are used by companies like Brunswick, Lockheed Martin, and Medtronic.
Indium Corporation, established in 1996, is an ISO 9001:2015 certified manufacturer and supplier of advanced electronics assembly materials solutions. The company provides solder and thermal management products for over 3,000,000 electric vehicles. Their products are used in essential markets such as medical equipment, fire suppression, transportation, automotive, defense, and emergency communication devices. They have facilities across the Americas, Asia/Pacific, China, and Europe, with multiple licenses and certifications in each. Their wide range of products includes solder paste, thermal interface materials, fluxes, die-attach materials, and more.
Imperial Weld Ring Corp., established in 1959, is a manufacturer of precision metallic welding products such as weld inserts & test coupons, weld backing rings, machined weld rings, and consumable inserts used in oil & gas pipeline systems, nuclear sector, power generation sector, wall welding, and steam boiler applications. The Elizabeth, NJ, company offers precision CNC turning and machining services on metals such as stainless steel, titanium, superalloys, aluminum, and steel. The company has threading, counterboring, profiling, knurling, and countersinking capabilities.
High Sierra Showerheads, founded in 2010, is an American manufacturer based in Coarsegold, California, specializing in energy-saving showerheads. The company was initiated after its founder, David Malcolm, invented the 1.5 GPM low-flow showerhead that delivers a stimulating shower experience while conserving energy. Over time, the company's product range has evolved to include fixed, rain, handheld, and combination showerheads. The company also offers related accessories, adapters, and bushings. These products find applications in various settings, such as private residences, recreational vehicles, public shower facilities, and outdoor shower spaces. The company also conducts installations in correctional facilities, student and military housing, and fitness centers.
Griplock Systems, LLC is an American manufacturer of cable suspension components and systems established in 1992 and headquartered in Duncan, South Carolina. The company produces various suspension products with a wide range of applications including in HVAC systems, lighting, displays, and art exhibition. Its product line includes cable and boot grippers, aircraft cables, and powered suspensions. Griplock Systems also offers kit customization and private labeling services to client galleries and museums, retailers, HVAC manufacturers, and industrial lighting providers.
Greaves Corporation, headquartered in Centerbrook, Connecticut, has been supplying electrical connectors to the electrical construction industries since 1947. A full-line supplier, Greaves has an inventory of over 4,000 different items. The company has facilities and manufacturing capabilities to produce mechanical lugs and splices, compression lugs and splices and adapters, and numerous types of grounding clamps. Greaves has a variety of in-house metalworking and machining processes, as well as an extensive stock of raw materials and finished products, allowing it to quickly supply both standard and special products. Its capabilities include designing custom products and modifying standard products for specific applications.
General Extrusions, Inc., established in 1950, based in Youngstown, Ohio, is a manufacturer of aluminum extrusions. The company offers standard and custom aluminum extrusions, rod and bar extrusions, angles, channels, tubing, and pipes. It's engaged in fabrication, anodizing, and powder coating, as well as aluminum finishing and machining. Services offered include design, engineering support, and short run prototyping. The company serves various industries including appliances, automotive, electronics, heavy truck and trailer, and medical, among others.
Felling Trailers, Inc. began in 1954 and is headquartered in Sauk Centre, Minnesota. The company is an ISO 9001-certified full-line trailer manufacturer and service provider. The primarily serves the automotive transportation industry with some parts being cross-compatible with other industries. The company’s product lines cross multiple types of trailers from drop-deck trailers and light utility trailers to rigid-neck semi-trailers and specialty trailers. The company’s service department offers maintenance and service work and complete trailer refurbishing.
Cleveland Tungsten, Inc., founded in 1916, is a manufacturer and supplier of tungsten products located in Jurong Town, Singapore. The tungsten products include powder, electrodes, cut-to-length rods, discs, contact arms, and pint sets, as well as vaporizing coils and custom solutions to the technology, energy supply, automotive, aerospace, and military industries. The company has a sale office and warehouse in Solon, Ohio, U.S.A. The company offers individualized services to small and large corporates.
Carter Alloys Company is a supplier and manufacturer of non-ferrous metals, which are used from industrial levels to the arts. The company has two facilities, one in Pennsylvania and one in California. Carter Alloys Company supplies Copper Anodes, Nickel Anodes, Bismuth Metal, and Babbitt Metal. The company also offers standard shapes, dimensions, and alloys. Additionally, Carter Alloys Company allows for designing and formulating customized anodes for specific job requirements. The company’s anodes follow strict manufacturing conditions and are comprised of phosphorized and non-phosphorized copper, zinc, nickel, and tin.
Air Metals, established in 2007, is a custom manufacturer and supplier of aircraft and specialty aerospace metals. The company supplies its products in product forms, such as rod plates, tubings, sheets, and strips. All their products are made from aluminum, stainless steel, magnesium, carbon and alloy steel. They also offer secondary services such as deburring, grinding, polishing, heat treating, and laser cutting. They are headquartered in Los Angeles, California, and earned its ISO9001 and AS9100 certifications in 2008.
Acrolab Ltd was founded in 1948 in Windsor, Ontario as Accurate Laboratories where it still presides. The ISO 9001:2015-certified company provides thermal systems products and services for general manufacturing, electronics, automotive, and rubber industries among others. The company’s products include heat pipes, thermocouples, control panels, and other thermal distribution tools. The company provides thermal engineering, thermal simulation, and research & development services for customers. Thermal engineering provides concept development support. Simulations provide analysis to assist in design choice and operational strategies. The research and development group creates new designs for customers.
ACI Alloys, Inc. was founded in 1985 and based in San Jose, California in the heart of Silicon Valley. The company manufactures sputtering targets, evaporation sources, and specialty materials for thin-film and related applications both for educational and industrial customers. The company manufactures materials from most elements and has developed or manufactured hundreds of alloys over the past 11 years. The company works with most rare earth elements to create unique alloys for customers, apart from promethium which is radioactive. The company can also reclaim unused elements of alloys.
Gullco International, Inc., founded in 1954, is a manufacturer and distributor of welding automation products such as welding carriages, electrode ovens, ceramic weld backing, high-speed beveling, and cutting carriages used in shipbuilding, tank welding, oil & gas, infrastructure, and power generation industries. Based on Bavaria Road East in Macedonia, the company provides on-site training for the use of Gullco products, specializing in horizontal and vertical welding. International trademarks include KAT, MOGGY, KBM, Pipe Kat, and SAM.
Epic Tool Inc. is based in Niagara Falls, New York. The ISO 9001:2015 certified company is a distributor of manufacturing equipment commonly used in power generation, aerospace, automotive, and die & mold industries. Under 9 brands including Millstar, USA, YMW Taps, and Technics, the company provides solutions for drilling, end milling, reaming, tapping, and tool holding. The company’s milling cutters are designed for use on lighter CNC machine tools and for very higher feed rates compared to standard milling cutters.
T.R. Wigglesworth Machinery Company is a family-run business that was founded in 1935 and based in Bedford, Ohio. The company is a distributor of manufacturing equipment, tools, and machines. The company is led by faith to serve and donate to the Bedford city mission. The company features brands such as Webster & Bennet, Acer, Whacheon, Femco, and Kent. The company’s product offerings include boring mills, grinding and milling machines, and manual and CNC machines. The company also offers parts and services including auctions, financing, and purchasing of used equipment.
Spee-D-Metals is a manufacturer and supplier of metal products and services and the company was established in 1977 and is based in Willoughby, Ohio, United States. Spee-D-Metals offers a range of metal products, such as aluminum, steel, stainless steel, and alloy steel, in various shapes and sizes. The company also provides custom metal orders, metal cutting services, and online metals for sale. The products are used for different purposes, such as machining, manufacturing, aerospace, transportation, and construction. Spee-D-Metals is loyal to customer satisfaction and quality standards in metal works.
Pennsylvania Steel Company Inc, founded in the year 1972, and based in North Carolina, USA, is a manufacturer and supplier of steel, aluminum, and metal materials. Their product portfolio includes aluminum, carbon alloy steels, cold finished bars, expanded metal and grating, hot rolled steel, and stainless steel. The products are used in many industries which include construction, government and defense, irrigation, and water supply. The company also offers services for inventory and management solutions.
NTM, Inc., founded in 1976 and headquartered in Fridley, Minnesota, is an ISO 9001:2015 certified manufacturer, distributor, and supplier of cutting tools, machined products, and services. The company offers a range of products, including boring bars, carbide inserts, custom tooling, as well as CNC machining, tool grinding, and various other services like tool repair, heat treating, and surface finishing. Their products and services are utilized in machining operations to achieve precise and efficient cutting, boring, and hole enlargement in workpieces of metalworking, aerospace, automotive, industrial machinery, and engineering industries.
Liberty Industries was founded in 1953 and is headquartered in El Monte, California. Liberty Industries is a manufacturer and global distributor of cleanroom and contamination control supplies and accessories. Liberty Industries’s product offerings include modular softball, mini-micro cleanrooms, air showers, laminar flow benches, shoe brush machines, Tacky Mats, fan filter units, pharmacy prep rooms, pass thru, clean film packaging, particle counters, and several hundred accessories. Liberty Industries also offers 3rd party testing services as well as customization services upon request.
Klein Tools is a fifth-generation family-run producer of hand tools founded in 187 and headquartered in Lincolnshire, Illinois. Klein Tools sells worldwide directly and through distributors. Klein Tools has a family of companies under its brand including Alco, Civitella, Mumme Tools, Tulmex, and Wattmaster. Klein Tools serves several industries including construction, HVAC/R, plumbing, telecom, municipal, and industrial. Some of the tools Klein Tools produces include non-contact voltage tester bens, multi-bit screwdrivers, digital circuit breaker finders, advanced circuit tracer kits, and multi-bit electronics screwdrivers.
Joseph Fazzio, Inc. was established in 1965 as a family-owned business and is based in Glassboro, New Jersey. Joseph Fazzio is both a distributor and servicer of industrial tools, machinery, and materials. The company's product offerings include building materials, fasteners, fleet products, hydraulics and mechanical components, and tool storage. Additional types of products include sheet metals, heavy machinery, and specific bolt, nut, screw, and spacer selections. The company's surplus division also offers a line of used products for sale across product lines.
High Performance Alloys, Inc., founded in 1984 and based in Great Lakes, Midwestern US, is a manufacturer and supplier of alloys. The company offers a range of products, including advanced alloys for various industries, such as aerospace, automotive, and oil and gas. The company is known for its quality alloys that provide incomparable strength, durability, and resistance to extreme conditions. They also provide excellent customer services, including technical support and customized solutions, catering to diverse manufacturing needs. High Performance Alloys, Inc. remains enthusiastic to delivering materials that drive progress and efficiency in multiple sectors.
Flexospan Steel Buildings, Inc. has been a manufacturer and distributor of metal building panels and accessories since 1969 and is located in Pennsylvania. The company designs metal roofing and siding panels specializing in corrugated metal roofing and siding, standing seam roof panels, traditional r-panel, and more along with heavy gauges and finishes. They also maintain an extensive inventory of coil stock in various gauges and finishes with various fasteners, insulation, fiberglass panels, and accessories to facilitate the Metal Construction Industry.
Caylor Indstrial Sales, Inc. was founded in Dalton, Georgia in 1980. Today, Calor serves a number of sectors of the industrial market, in particular engineering, construction, manufacturing, paper mills, and chemical plants. The company is a distributor of many industrial components including valves, fittings, pipe and tube hangers, actuators, and water, steam, and air regulators. The company also offers services as a manufacturer of both low and high-volume production custom parts using a variety of materials including steel, stainless steel, aluminum, brass, Delrin, and Lexan.
Auburn Armature was founded in 1946 and headquartered in Auburn, New York. Auburn Armature is a distributor of electrical products and was recently purchased by Power-Flo Technologies of New Hyde Park, New York. Services that Auburn Armature provide include training, testing, rebuilding, repair, troubleshooting, and training. Parts that Auburn Armature specialize in include automation systems, AC and DC drives, motor controls, motors, motion controls, connectors, wire, boxes, cables, sensors, relays, transformers, panels, struts, terminal blocks, lighting supplies, and conduits.
Associated Bag is headquartered in Harrisburg, Pennsylvania. Associated Bag is a bag and shipping product distributor with 4 distribution centers across the United States. Associated Bag Products include anti-rust & anti corrosion bags, boxes, bubble & cushioning, business envelopes & mailers, dispensary products, document & media protectors, eco-friendly products, food service & packaging, gloves, industrial & shipping supplies, janitorial supplies, liners & covers, personal protection, retail packaging, sealed air, tapes & adhesives, ties & sealers, tools & equipment, tubing, VCI products, vinyl, zipper bags, and more.
Amtek Tool and Supply, Inc. based in Madison Heights, MI. Amtetk is an online super market for tools, supplies, and other hardware for individual, professional, and corporate customers. Product types include milling, threading, and turning devices, tooling systems, saws, broaching and deburring bits, cutting tool blanks and spares, abrasives, power tools, hand tools, safety equipment, measuring devices, lubrication, sanitation supplies, storage, pneumatics, shipping supplies, transmissions, and various other hardware and shipping supplies. Amtek’s online storefront offers precise filters to help find exact products to meet customer needs.
AMPCO METAL, established in 1914, is a manufacturer and distributor of specialty copper alloys and engineering products like wrenches, knives & scrapers, screwdrivers, hammers, and hex keys used in wear resistance, metal forming, resistance welding, corrosion resistance, and plastic processing, among other uses. The company in Switzerland provides rough cutting and machining, quality control, research and development, technical consultation, and completed machined parts for automotive, marine, oil & gas, aerospace, and general engineering industries.
Aerospace Alloys, Inc., established in Bloomfield, CT, in 1980 is a distributor of alloys used in industries including Aerospace, Power Generation, Defense, and Medical. Their product portfolio includes aluminum alloys used in industries such as aerospace, automotive, and construction, titanium used for medical implants, and nickel alloys used in petrochemical, and marine applications. The company also provides services including, kitting, cutting and CNC milling. The company has a national distribution network and a customer support center.
Abbeon Cal Inc. is a manufacturer, distributor, and supplier of plastic working tools, based in California, USA, since 1995. They offer a wide range of products, including handheld tools for cutting, punching, and bending plastic, as well as machine tools for cutting, drilling, and milling plastic. Accessories like dies, punches, and cutting blades are also available. The company provides plastic working services, including custom tool design, manufacturing, and repair. Some of their featured products include Handheld Thermoplastic Shears, Pneumatic Hot Hole Punch, Automatic Tubing and Cable Cutting Machine, Temperature and Humidity Analog Dials, and Dataloggers.
Cab Worldwide Holdings, Inc. was founded in 2006 and headquartered in United States. The company's line of business includes providing transportation by automobiles such as taxicabs. With steady growth over the years, they’ve built a team of highly skilled specialists including forging experts, foundry engineers, metallurgists, machining experts, quality systems experts and skilled project managers to bring the highest quality products to our customers. Cab worldwide Holdings Inc are experienced in supplying steel, iron, aluminum, and stainless and alloy parts in a variety of markets.
Bombay Tools Centre Pvt Ltd, established in 1976, is a supplier of industrial tools and measuring equipment located in Byculla E, Mumbai. The product categories include coating inspection & paint testing equipment, digital/dial torque wrenches, non-sparking safety tools, precision crimping tools, and VDE-insulated tools. Some general measurement tools include micrometers, vernier depth gauges, dial spas meters, vernier calipers, and dial gauge plungers. The tools are applied in oil &gas, automotive manufacturing, breweries & distilleries, power generation, and medical markets.
Accusize Industrial Tools was born in Toronto, Canada in 2008. Accusize is a distributor of measuring tools, cutting tools, and machine tools for metalworking companies. A portion of offerings that Accusize offers includes collet blocks, expanding arbors, air tools, power tools, die maker tools, annular cutters, bore gages, boring bars, boring heads, BT40 tooling, CAT40 tooling, calibration, layout, & machine setting tools, calipers & attachments, carbide inserts, end mills, force gauges, and metrology and material testing equipment.
Westfield Steel, founded in Westfield, IN, in 1977 is a supplier of steel products such as hot rolled steel, cold rolled steel, galvanized steel, and stainless steel. The company's product portfolio includes a wide selection of steel sheets and plates in different grades and thicknesses, suitable for construction, manufacturing, and structural applications, steel pipes and tubes, and steel bars and rods. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building.
Valmet Inc., established in the 1750s, is a global developer and supplier of process technologies, automation, and services for the pulp, paper, and energy industries. The company has been an industrial operator but was held by the State of Finland and was given new life with the demerger of the pulp, paper, and power firms from Metso Corporation in December 2013. Valmet provides bioenergy plants and paper mills with technologies. Valmet employs around 17,000 people and operates in over 40 countries. Its corporate headquarters are in Espoo, and the company is traded on the Nasdaq Helsinki.
Traffic Safety Warehouse is based in Deerfield, Illinois. Draffic Safety Warehouse is a wholesale direct marketer of traffic safety, work zone safety, pedestrian safety, crew safety, crowd control and other products, mostly made in the USA. Traffic Safety Warehouse generally serves other distributors, construction companies, utilities, educational intuitions, and municipal governments. A few examples of products include numerous types of barricades, facility safety devices, lights, parking lot safety, and work zone safety accessories.
Sugar Steel Corp., headquartered in Chicago Heights, Illinois, has been a distributor of iron and steel structural shapes since 1966. The company's product line includes an array of items such as beams, angles, channels, tubes/pipes, plates, sheets, flats, rounds, squares, and rebars. These products find application across industries including construction and manufacturing, serving as essential components. Its processing capabilities, include services like saw cutting, miter cutting, and CNC plate burning. These capabilities enable precise customization and preparation of materials to meet specific project requirements.
SteelNow, founded in Houston, Texas, is a supplier of metals such as aluminum, steel and stainless metals. The company's product portfolio includes aluminum products, including sheets, plates, coils, bars, and extrusions, and alloy steel products. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company provides services such as Product Selection Guidance, Engineering Support, national distrubution, technical support, and customer service.
R. P. Crawfard Co., Inc. began in 1962 in Pittsburgh, PA. RPC primarily develops and sells industrial products but also sells and promotional and consumer products. Industrial product lines include pallet racks and other material handling equipment, warehouse equipment including platforms and production tables, and storage shelving. Promotional and consumer products include apparel with and without logos, technology-related products, backpacks, bags, and coolers, pens and markers, drinkware, flags, and umbrellas.
Plastic Engineered Products, Co. is owned by the Ryan Herco Flow Solutions Company and is a a distributor of fluid handling, control and high value filtration systems for corrosive and ultrapure systems. PEP offers both sales as well as services. Sales offerings include tubing, hoses, measurement & control devices, housings, tanks, and pumps. Services include custom plastic & fiberglass fabrication while field servies include emergency repair as well as maintenance and testing as well as fabrication and welding.
New Source Corporation, established in 1992 and headquartered in Orlando, Florida, serves as a distributor and supplier of metallic aerospace materials for both the defense and commercial aviation sectors. The company's product range encompasses aircraft aluminum extrusions, forgings, roll forms, and stringers. Additionally, the company offers a comprehensive array of services including machining, heat treatment, precision grinding, and waterjet cutting. The company holds several certifications, including AS9100, AS9120, and ISO 9001 certifications.
MTH Industrial Solutions, founded 2017, and based in Florida, USA, specializes in manufacturing and supplying industrial fiberglass and polyethylene products. Their product portfolio includes fiberglass products with disinfectant and filtration products. The fiber glass products generally offer many benefits such as corrosion resistance, non-conductive, non-magnetic, lightweight, maintenance-free, ease of fabrication and installation, and cost-effective features. The products are used in various industries which include automotive, wind, energy, aerospace, and electronics and are delivered in time to meet customer requirements.
Meyer Material Handling was founded in 1974 and is headquartered in Indianapolis, Indiana. The company is a full-service material handling products and systems distributor, serving manufacturing, packing, and material handling industries. The company’s product categories include product moving equipment such as carts and shelf trucks, lifting and docking equipment, safety equipment, modular office and storage spaces, and more. The company also produces custom design equipment, assistance with integration and layout, CAD drawing preparation, and installation services.
MetalMark is a distributor of metal for industry based in Chagrin Fall, Ohio. The company distributes stainless steel, aluminum, titanium, as well as copper, and carbon steel across the United States. MetalMark also purchases surplus metals in both prime and secondary conditions and can be excess, obsolete, aged, or damaged, but usable material in coil, sheet, plates, bar, or pipe. The company supplies metals of various grades, surface finishing, widths, and thicknesses.
JACQUET, established in 1962 and located in Limerick Township, Pennsylvania, is a distributor of stainless steel and nickel alloys. The company provides an extensive selection of stainless steel bars, with diameters ranging from 0.5 to 12 inches, with the choice of both full-length bars and custom-cut pieces. The company also offers stainless steel plates that range in thickness, starting from 0.125 up to 6 inches, along with various width options, including 48, 60, 79, 96, and 120 inches, depending on the specific grade. A range of processes, including plasma, plate sawing, water-jet, and laser cutting, further enhances its offerings.
Interstate Pipe & Supply Company was established in 1968 and operates out of Butler, Pennsylvania. Interstate Pipe & Supply is a distributor serving municipal and industrial customers such as the oil and gas industry. Interstate Pipe & Supply products include pipes, valves, fittings, pumps, industrial products, municipal products, water, oil, gas well products, well pad products & accessories, tanks, tools, plumbing fixtures & appliance products, catch basins & trench drains, as well as accessories.
Industrial Metal Supply Company is based in California with locations across California, Arizona, and Northern Mexico. The company is a distributor of metals and accessories for dealing with metal. The company also provides numerous finishing services. The company works with many types of standard metals such as steel, aluminum, and copper as well as many specialty metals including hobby metals. The company offers metals in bar, tube, pipe, sheet, and plate forms. Services include cutting to size, laser cutting water jet, and custom extrusions among others.
Extrude-A-Trim is a supplier of aluminum extrusion that is headquartered in Toronto, Canada and was established in 1962. The company offers in-demand stock shapes and custom shapes. It's in-stock shapes range from adhesives, corner molding, J Channel, Roller Shade Extrusions, and SLiding Track Systems. The company also has a 10-section aluminum profile catalog which ranges from standard shapes and structural shapes, assorted fixture trim, glass railing system, roller shade extrusions, and ticker moldings.
Delta Steel are manufacturers of components for industrial fabricators, with its headquarters located in Houston, Texas. The company commenced its operations in 1963. 2008 Reliance Steel & Aluminium bought the company, becoming a Metal Service Center Institute (MSCI) member. The firm represents a transformative development in the field of wholesale distribution. Primarily, the company engages in the production of steel and its associated pre-production processes. The company manufactures carbon structural steel products, encompassing structural tubes and beams, angles, channels, and other items, plates, flats, pipes, rounds, sheet goods, and expanded metals.
Continental Steel & Tube Company (Continental) was founded in 1985 and operated out of Fort Lauderdale, Florida. Continental is a supplier and distributor of quality metals and is ISO 9001:2015 and AS9120B:2016 certified. Continental serves the aerospace, petrochemical, construction, military, medical, industrial, racing, automotive, and marine industries. Continental offers products of a number of materials including titanium and titanium-based metals, nickel, carbon and alloy steel, stainless steel, aluminum, copper, brass, and bronze.
Chicago Stainless, Inc., founded in 2008, is a distributor of stainless steel and aluminium items such as coils, strips, sheets, plates, and thread plates with processing locations in Houston, Chicago, Cleveland, Pittsburgh, and Dalla. The products are slit to size, polished, cut-to-length, sheared, and PVC’d in 200 to 300 series with coast-to-coast shipment and door deliveries. The products are non-magnetic, not heat-treatable, corrosion resistant, and used in washing machine tubs, chemical equipment, architectural applications, food equipment, and automotive trims.
bisco industries was founded in Chicago, Illinois in 1973 and now is headquartered in Anaheim, California. bisco industries is a distributor of electronic components and fasteners used for production in aerospace, communication, computer, fabrication, industrial equipment, instrumentation, marine, and military industries. Some of bisco’s product offerings include fasteners such as nuts and washers, hardware such as casters and bearings, door and access hardware including handles and hinges, electronic connectors including circular connectors and terminal blocks, enclosures such as cabinets and rack components, and wires and cables including wire and cable management including sleeving and tubing.
Atlantic Equipment is headquartered in Massachusetts with offices across the Atlantic Seaboard. Atlantic Equipment is a distributor with services including rental and repair of construction and industrial equipment. Atlantic Equipment offers construction equipment, roofing equipment including roof power deck equipment, melters, on-deck equipment, hot air welding machines, and portable air compressors, safety equipment including cones, barricades, fall arrest carts, and warning line systems, various drill bits, chisels, and diamond blades, as well as hand tools including hand welders, caulking guns, torches, scissors, grizzly bards, and shingle roof tear-off shovels.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Wieland Chase LLC |
1.7%
|
| 2 | T & T Manufacturing, LLC. |
1.7%
|
| 3 | The Rose Corporation |
1.3%
|
| 4 | Storm Power Components |
1.3%
|
| 5 | Burke Forging & Heat Treating, Inc. |
0.9%
|
| 6 | Alabama Wire, Inc. |
0.9%
|
| 7 | Atlantic Equipment |
0.9%
|
| 8 | bisco industries |
0.9%
|
| 9 | Chicago Stainless, Inc. |
0.9%
|
| 10 | Grant Steel |
0.9%
|
Derivation Method
The ranking is calculated based on the click share within the bar page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
152 | 94.4% |
|
India
|
4 | 2.5% |
|
Canada
|
4 | 2.5% |
|
China
|
1 | 0.6% |
35 products found
35 products
Toho Koki Co., Ltd.
60+ people viewing
Last viewed: 12 hours ago
■Features Japan's only professional wooden box opener.
K’s Material Co., Ltd.
150+ people viewing
Last viewed: 1 day ago
There are other model numbers available.
10 models listed
K’s Material Co., Ltd.
90+ people viewing
Last viewed: 1 day ago
Convenient for small tasks, essential for on-site work. A crowbar that can be easily used for various tasks such as nail removal, scraper, lever, a...
7 models listed
K’s Material Co., Ltd.
60+ people viewing
Last viewed: 22 hours ago
■Features ・Long nail end part ideal for siding construction work ・Two items with a total length of 185mm that are easy to hold are available.
2 models listed
K’s Material Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
Introducing the best crowbar for steel formwork work. We have created this product based on the voices of people working on steel formwork, such as...
IPS PLIERS Co., Ltd.
30+ people viewing
Last viewed: 10 hours ago
The definitive version for removing the first packer. Just insert it into the gap and press lightly. It can also be used to remove springs from Vin...
Asahipen Co., Ltd.
20+ people viewing
Last viewed: 5 hours ago
■Features Special tools for removing fusuma frames and removing nails will make the work easier. ■Applications For removing fusuma frames and remo...
Asahipen Co., Ltd.
20+ people viewing
Last viewed: 1 day ago
■Features You can remove the sliding door handles and use a special nail puller to pull out the puller nails, making the work smoother. ■Applicati...
10+ people viewing
Last viewed: 24 minutes ago
■Product details - Clover made of sturdy material. - A crowbar recommended for leverage work.
