This section provides an overview for anti-slip tapes as well as their applications and principles. Also, please take a look at the list of 64 anti-slip tape manufacturers and their company rankings. Here are the top-ranked anti-slip tape companies as of November, 2024: 1.Shanghai Jian & Mei Industry and Trade Co., Ltd., 2.Fujian Youyi Adhesive Tape Group Co., Ltd, 3.Suzhou Tongxie Adhesive Tape Co., Ltd.
Table of Contents
Anti-slip tape is a tape that is attached to slippery floors to prevent slips and falls.
Anti-slip tape is sold in various types, such as for striped steel plates, or iron plates with protrusions used for gutter covers, for indoor use, and for outdoor use, depending on the application and place of use.
It is used in places where people are likely to fall, such as factories where powder tends to accumulate, and it is designed not only for human walking but also for wheelchairs to prevent slipping when climbing over steps.
Anti-slip tape, as mentioned above, is often used to prevent falls. Smooth surfaces are easier to clean and look more beautiful than carpets, so smooth floors such as tiles are preferred for building entrances and other places that are easily soiled.
On the other hand, smooth floors have low friction and are very prone to falling, especially when liquid is present, and falls often cause injuries, especially on rainy days. Anti-slip tape is intended to prevent these accidents.
Anti-slip tape may also be applied to stairs and other places where a slip can cause serious injury. Bathrooms in particular are even more slippery than water alone because of the use of soap and other surfactants. Anti-slip tape is used not only outdoors but also indoors to prevent hazards.
Anti-slip tape is mainly plastic tape with hard mineral particles or plastic granules attached to its surface to increase friction.
The surface grains vary depending on the application, but they are firmly bonded with a resin coating so that the particles will not come off when stepped on or when a load or other object passes over them. Similarly, the adhesive strength of the tape applied to the floor is also strong, making it difficult to peel off.
Outdoor use is characterized by high water resistance and strong materials since it is exposed to rain and wind. Some of them allow you to walk without slipping as long as you step on the tape, especially when the floor is covered with oil.
Anti-slip tape of the light-storing type is also available, which releases stored light and glows in the event of a sudden power outage, making it more visible and safer.
Anti-slip tape is classified into different types depending on where it is used.
For outdoor use, hard mineral particles are mainly used to prevent slipping, as it is expected to be stepped on or walked on with shoes on. On the other hand, for indoor or bathroom use, soft plastic is often used in consideration of touching with bare hands or bare feet.
Generally, black or gray is used. Depending on the location, some tapes are available in transparent colors to make them less noticeable, and others are available with graphics to alert people to their presence.
Anti-slip tape is mostly made of plastic. There is no problem as long as the surface to which the tape is applied is flat. However, if the tape is applied to an uneven surface or striped steel plate, the adhesive surface will lift up. In such cases, the base material is made of aluminum and can be adhered to uneven surfaces.
In most cases, manufacturers sell their products in categories based on the intended use scenario. However, the colors and sizes available may be limited depending on the situation of use.
Although appearance is an important factor, anti-slip tape should be selected by placing the highest priority on the effectiveness and purpose of the anti-slip tape. In particular, if a tape designed for indoor use is used outdoors, it may not be effective enough.
To apply anti-slip tape, cut the tape to the required length with scissors, peel off the backing paper to reveal the adhesive side, and stick it to the floor. The key point is not to stick only one row of tape, but to stick several rows at a pitch of about 20 cm according to the size of a person's foot, avoiding the tape and avoiding stepping directly on a wet floor.
In addition, before applying the tape, clean the adhesive surface to prevent it from peeling off, and round the corners to ensure long-lasting effectiveness. Some manufacturers recommend applying a primer to the surface to be affixed beforehand, so prior confirmation is essential.
*Including some distributors, etc.
Sort by Features
Sort by Area
Safeguard Technology Inc., established in 1992 and headquartered in Streetsboro, Ohio, United States, is an anti-slip solutions developer, designer, and manufacturer. The company's products include safety anti-slip mats for ramps, safety tape, and ladder rings covers for better foot traction. It also offers a range of special tools designed to keep hands safe, such as multi-purpose, hands-off magnetic lifting tools, hands-off safety tools for moving heavy metal objects, maneuvering pipes, and heavy cylindrical objects. The company's Hi-Traction direct-gritting anti-slip surface can be bonded directly to supplied materials, or OEM customers can provide engineered drawings for in-house fabrication.
Jessup Manufacturing Company, founded in 1956 with headquarters in McHenry, Illinois, USA, is a manufacturer of adhesive-coated and laminated materials and photoluminescent films and sheets. The company's product line includes anti-slip tapes and treads, rubberized vinyl treads, textured vinyl, and fluorescent signs. These products are used for various products, including industrial floor line marking, anti-slip flooring, exit signs, and sports equipment such as skateboard grip tape. It also offers blank and custom-printed roll stock. The company serves markets that include military, industrial, transportation, recreation, and construction.
3M Company was founded in 1902 and is headquartered in St. Paul, Minnesota. 3M provides diversified technology services globally. 3M operates through four segments: Safety and Industrial, Transportation and Electronics, Health Care, and Consumer. The Safety and Industrial segment offerings include industrial abrasives, masking, and natural and color-coated mineral granules for shingles. The Transportation and Electronics segment offerings include ceramic solutions, light management films, and electronics assembly solutions. The Healthcare segment offerings include wound care, dentistry and orthodontia solutions, and filtration and purification systems. The Consumer segment offerings include consumer bandages, picture hanging, and stationery products.
Sure-Foot Industries Corp., founded in 1979 and headquartered in Cleveland, Ohio, USA, is a manufacturer of anti-slip products designed to enhance safety in various settings. The product varieties include anti-slip floor treatments, safety stair treads, and non-slip coatings, all of which provide effective slip and fall prevention solutions. These products offer benefits such as improved traction, durability, and resistance to wear and tear. It serves a comprehensive range of industries, including manufacturing, healthcare, hospitality, and transportation, where slip and fall accidents can have significant consequences and helps in reducing accidents and injuries caused by slippery surfaces.
Nadco Tapes and Labels, Inc., headquartered in Sarasota, Florida, is a manufacturer and supplier of adhesive tapes and labels. The company serves various industries including packaging, automotive, electronics, and logistics. Their product range includes pressure-sensitive tapes, custom labels, and specialty adhesive solutions, which are used for packaging, branding, product identification, and sealing applications. Nadco holds certifications such as ISO 9001, ensuring compliance of products to industry standards, while providing effective adhesion, durability, and functionality for efficient operations and brand integrity in industrial settings.
Larsen Packaging Products is headquartered in Saint Charles, Illinois. Larsen Packaging Products manufactures and distributes packaging products. Larsen Packaging Products box manufacturing techniques include high speed 2 color rotary die-cutter, high speed 2 color mini flexo/gluer, 2 color flexo/folder/glouer, high speed gluing, stiching, in-line taping, jumbo lineal feeed press, and specialty folder gluing. Box offerings include custom boxes based on standard and e-commerce designs such as self-erecting sex corner tray, full telescope design style container, half slotted container, and more.
Handi-Ramp is a manufacturer and supplier of wheelchair ramps, lifts, and other accessibility products, founded in 1958 and headquartered in Hayward, California. It specializes in producing access ramps, including portable wheelchair ramps, threshold ramps, and custom wheelchair ramps. These ramps create an inclusive and accessible environment, enabling individuals with disabilities to navigate and participate fully in various aspects of life, such as homes, public spaces, and businesses. One of their featured product lines is HandiTreads, a non-slip treads and stair nosings, providing a secure and slip-resistant walking surface. Additionally, Handi-Ramp provides other industrial products, including hose/cable protector ramps, and dockboards.
Wooster Products, Inc., founded in 1921, and headquartered in Wooster, Ohio, is a manufacturer and distributor of anti-slip safety products for stairs and walkways. The company offers a range of products, including anti-slip treads, nosings, coatings, tape, and mats in which their products are used in various applications, including new construction, renovation, and OEM applications. Wooster Products is a certified ISO 9001 company and is a member of the American National Standards Institute (ANSI).
Riverside Paper Company was founded in 1973 and is headquartered in Miami, Florida. Riverside Paper Company is a distributor of shipping, packaging, and maintenance products to customers in Florida as well as nationally and internationally. Riverside Paper Company’s product listings include a full range of packing materials, materials for packing and handling, industrial packing, mailing, and miscellaneous supplies. Riverside Paper Company also has trained product specialists to assist customers with shipping and packing information to save on time and cost.
Cougar Packaging Solutions was founded in 2010 and is headquartered in Romeoville, Illinois. The company is a distributor of packaging products, services, and supplies for customers across industries. The company serves customers with shipping supplies, equipment, janitorial supplies, and shipping design services. Shipping supplies include corrugated products and shrink film. Equipment includes stretch and shrinks wrappers. Janitorial supplies include cleaners, cleaning tools, soaps, and others. Design services include custom packaging options for weight, size, ergonomics, and item protection.
Champion Tape, formed in 2009, is a manufacturer and distributor of tapes such as single and double-coated, framing, foam, low friction, and specialized tapes used in the aerospace, electronics, graphics, and general sectors for manufacturing, maintenance, and refurbishment. The company, headquartered in Racine, Wisconsin, offers online technical help to consumers and market-unique flexibility. Customized tape solutions as tiny as 2 mm and as wide as 60 inches are available, with coating weights ranging from.1 to 15 mils and film thicknesses ranging from.25 mil to 15 mils.
Cardinal Carryor was founded in Lexington, Kentucky and is now based in Louisville. Cardinal Carryor is a distributor specializing in mobile material handling equipment sales, rental, and service. Cardinal Carryor’s equipment offerings include forklifts, forklift attachments, forklift batteries and battery chargers, industrial sweepers and scrubbers, automated guide vehicles, and equipment parts and accessories. Cardinal Carryor’s service options include mobile battery cleaning, rebuild, and repair, rental equipment services, training, and battery planned maintenance options.
Can-Do National Tape, Inc. was founded in 1972 and is headquartered in Nashville, Tennessee. The company is a manufacturer and distributor of adhesive tape and tape conversions to several industries including aerospace, automotive, construction, clothing, and transportation. The company maintains three product segments: adhesive tapes, liquid adhesives, and adhesive conversions. Adhesives include everything from aluminum foil tapes to vinyl tapes while liquid adhesives are used in applications ranging from eyelash application to fiber optic bonding. As a distributor, the company sells 3M, Avery Dennison, Bemis, Parson Adhesives, and other brands.
B & C Industrial Products, Inc. is headquartered in Garrett, Indiana. The company is a manufacturer and distributor of casters and material handling equipment to manufacturing, storage, and related industries. The company has two product divisions: Casters and Material Handling Equipment. Caster sizes range from light-duty castors with weight limits starting at 60 pounds to Kingpinless casters with a maximum weight capacity of 40,000 pounds. Additionally, customers can build their own castors. The company’s Material Handling Equipment products include cranes, mezzanines, lift equipment, and modular enclosures.
Sure-Foot Industries Corp, established in 1979 at Ohio, USA manufactures commercial flooring products that are anti-slip and stair treads for ensuring immaculate footing. Specializing in the hotel industry, the company produces anti-slip treads for better customer experience and makes tapes, aluminum, as well as fiberglass grit-coated good step covers and walkways that is inevitable in oil industry. The long list of products include metal stair treads, vinyl treads, skip guard tread and hazard safety plates. Abrasive tape tiles and multiple coating lines that prevent slipping and are utilized in sectors such as commercial flats, shopping malls, retail outlets and transportation.
West Coast Supplies serves the stretch film/wrap, vented film, packaging supplies, and stretch wrap machine and equipment needs of a variety of industries including manufacturing, distribution, food, beverage, wineries, and more. West Coast Supplies is based in Rancho Cordova, California. West Coast Supplies offers both machines and equipment for backing. Machines include stretch film machines, tape machines case erectors and packers, and palletizers. Equipment includes stretch film, vented films, slip sheets and boxes, air/dunnage backs, and packaging supplies. Custom packaging solutions are also available upon request.
H&O Products Corporation is a company that specializes in manufacturing precision components and assemblies for various industries, including aerospace, defense, and medical devices. The company was established in 1971 and has since built a renown for producing high-precision, complex, and critical components that meet the most demanding customer requirements. The company has won several awards for its products and services, for its unique quality, on-time delivery, and customer service. The company's consistent aim on continuous improvement, lean manufacturing, and technological creativity has helped it establish a strong position in the precision manufacturing industry.
Stickon Packaging Systems, Inc. was founded in 1976 and is a supplier of specialty tapes, new and used equipment, labeling equipment, and packaging supplies. The company offers a wide range of products including Ultra bond and anti-slip tapes as well as molded and foam goods, stretch films, buddle wraps, chipboard, and cardboard boxes. The company, headquartered in Arlington Heights, IL, provides sheets, rolls, die-cuts, and spool-wound goods to the power and utility, automotive, paint & sundries, construction, and military industries. The company's partners are Tesa Tape, AdChem, Pres-on, Straub Design, and Start International.
Orr & Orr, Inc. has been offering wholesale distribution services since 1934 out of Bedford Park, IL. Orr & Orr emphasizes speed of order processing, shipping, and both customer and distributor satisfaction. Product categories that Orr & Orr offers include air conditioners, brake controls, cargo restraint equipment, door tracks, lighting equipment, fans, gas springs, heating equipment, hinges, plumbing supplies, seat belts, steps, toolboxes, hitch and towing products, various truck hardware, cables, battery products, safety equipment, and spring latches.
Material Handling Solutions, LLC is an American distributor based in Mission, Texas, specializing in material handling equipment and industrial supplies. Their product offerings include a diverse range of warehouse and dock equipment, such as industrial shelving, storage cabinets, pallet racks, and plastic storage bins. Other offerings include drum handling equipment, used forklifts and lift tables, gantry and jib cranes, pallet trucks, and hoists. The company also provides office furniture and supplies, shipping supplies, and plumbing equipment. Material Handling Solutions currently serves customers in various cities across the United States, including Houston, Atlanta, Chicago, Los Angeles, and New York.
Lancaster Packaging was founded in 1989 and operates out of Hudson, Massachusetts. Lancaster Packaging is a national wholesale distribution & purchasing company providing vendor and supply chain management services. Lancaster Packaging’s line of Fast Packs feature standard sizes that meet government specifications. Models are available with a variety of die-cut foam inserts and flexible polyurethane foam for protection of shipped products. Additional services include requisition processing, tracking & reporting, sourcing, national wholesale distribution quoting, and invoicing bill pay solutions.
Kyana Packaging Solutions was founded in 19776 and operates in Louisville, Kentucky. Kyana Packaging Solutions is a market provider of smart solutions in packaging design and productivity improvements. Kyana’s iPAR Process, which stands for innovative Packaging Accelerating Results Process. iPAR is a service that helps clients identify problem areas both known and unknown, increase profitability, increase responsiveness to customer feedback, increase options for customer strategies, and provide leading-edge solutions for clients’ individual business situations. Kyana’s ASR Soultions assists clients with third party and reverse logistics, kitting assembly, custom manufacturing, marketing promotions, and metal stamping.
Jorgensen Company began in 1932 in Fresno, California as a service provider to fire departments. Today, the company is a service provider of integrated fire protection as well as a distributor of fire safety-related products. The company’s fire safety-related products include facilities safety, fire products, gas and fire detection devices, and protective wear. The company’s services segment includes fire services, design and installation, and safety services. Fire services include fire extinguisher services, employee training services, fire protection, and fire sprinkler services. Design and installation include fire extinguishers and fire alarms. Safety services include various safety training classes.
Coast Line International was established in 1960 and is based in New York as a distributor of engineered products. The company offers a wide range of products, including hoses, valves, adhesives & abrasives, composite repair equipment, as well as protective paper and pressure-sensitive tapes, used for various applications across various industries, including aerospace, automotive, and marine. There are also health and safety products available along with specific cleaners and lubricants for use in the Aviation industry.
Bristol Tape Corporation is an ISO 9001-certified manufacturer specializing in pressure sensitive tapes and adhesives that was founded in 1973 in Connecticut, USA. The company produces various tapes for home as well as professional use, such as duct tape, insulated electrical tape, and foam tape used for sealing or cushioning purposes. It also supplies industrial manufacturers with various adhesives including epoxy, acrylic, and silicone. The company offers standard as well as custom products that can be cut to size and produced to the color, material, and strength specifications required.
Source Equipment Company, Inc. was established in 1989 and headquartered in Leominster, Massachusetts. Source Equipment Company is a solution provider in warehousing, distribution management, and equipment sourcing. Source Equipment Company’s extensive catalog includes bins, boxes, cabinets carts, casters, chairs, containers, conveyors, cranes, barriers, dollies, doors, dumpers, hoppers, lifting equipment, office furniture, pallets, partitions, platforms, racks, safety equipment, scales, security equipment, trucks, wires, work benches, and other warehouse equipment including access equipment such as stairlifts, wheelchair lifts, ramps and residential elevators.
Nitto Denko Corporation is a Japanese manufacturer of adhesive tapes, optical films, semiconductors, electronic devices, and consumer products, was founded in 1918 and is headquartered in Osaka. The company operates through several segments, including industrial tape, optronics, human life, and Others. Their products are used in a wide range of industries, including automotive, display, life sciences, and more. They are always one step ahead in making good things happen with their advanced optical films for liquid crystal displays and the ability to create a constant stream of Global Niche Top products.
Tesa SE, established in 2001, is a developer and manufacturer of adhesive tapes and self-adhesive product solutions for various industries, commercial customers, and end consumers. The products include furniture, surface protection, security labeling, interior mounting, and mirror assembling are used for bonding products in the automotive, builiding, medical, printing, and appliances industries. Headquartered in Hamburg, Germany, the company operates in 100 countries and operates additional plants in Germany, Italy, China, and the USA, and is in the process of opening another in Vietnam.
AVATACK, established in 1995 in Taipei, Taiwan, is a manufacturer of advanced adhesive tapes for various uses. The company specializes in producing a broad range of adhesive tape varieties, including but not limited to masking tapes, double-sided tapes, packaging tapes, PVC, and specialty adhesive products. It has obtained ISO 9001 certification for stringent quality standards, offering benefits such as superior adhesion, durability, and stability. These adhesive tapes find applications across diverse industries, including automotive, construction, packaging, and general manufacturing.
GTG Manufacturing Sdn. Bhd, established in 2011 at Selangor, Malaysia is a manufacturer of adhesive tapes for various industrial purposes. The company makes a plethora of self-adhesive tapes in the form of Jumbo rolls or finished rolls. The products they make are OPP Packing Tape, Masking Tape, PVC Black Protection Tape, PVC Floor Marking Tape and Kapton tapes. They also specialize in making double-sided Acrylic foam tapes and various protection films. These self-adhesive tapes are useful in packaging, automotive, electrical, advertising and glass industries. They are used for bonding things together and also protecting them while transporting or other mechanical processes.
Brite Coatings Pvt Ltd, established in 1986 at Mumbai, India is a manufacturer of specialty coatings and self-adhesives for industrial and commercial uses. The ISO certified company manufactures surface protection film, lamination film, white vinyl film, double-sided and anti-skid tapes to mention some. These products come under the brand names of BC Fix and Durofix. They employ streamlined technologies for making the products that provide maximum stability and endurance. These specialty coatings and tapes find uses in automobile, packaging, air-conditioning, safety & security and general engineering. The specialty coatings offer customization in printing and the adhesives are useful in bonding components.
Adinath Equipments Private Limited, setup in 1996 at Gujarat, India is a manufacturer and supplier of welding machines, cutting machines along with other industrial safety products. The company is a privately owned manufacturer and supplier engaged with making products such as ARC welding machine, TIG welding machine, Plasma cutting machine, road safety products and gloves. These equipment are used in industries such as construction, heavy industries, mines, drilling and automobile sectors. The products are sustainable against harsh conditions, can withstand electrical disturbances and offer optimum performance, especially in galvanizing industries. They are an ENGIMACH award winner and ISO certified business.
Stick Tapes Private Limited, founded in 2013 at Mumbai, India is a manufacturer and exporter of various industrial and commercial adhesive tapes for binding and packaging. The company is engaged in the manufacturing of robust industrial tapes, BOPP tapes, double sided tapes, foil tapes and foam tapes for packaging uses. These products are used in various commercial product packaging, reattaching and equipment bonding for their strength, durability and endurance against external impacts. They are IndiaMart verified exporters and export their products globally. Their temperature-resistant Acrylic tapes are used for refrigeration and warehouse box sealing and customization is done on request.
Established in 2006, and located in Shanghai, China, Shanghai Jian & Mei Industry and Trade Co., Ltd, is a manufacturer of fasteners for engineering projects and customized hardware. The company produces bolts, nuts, washers, pins, screws, and other fasteners that have applications in Oil&gas, Energy, Home decoration, Machine manufacturing, and Automobile industries. Their products are made from materials including stainless steel, alloy steel, aluminum alloy parts, copper, and, special alloys. The manufacturing process involves cold heading, hot forging, machining, stamping, and casting.
Heskins Ltd, established in 1997 in Brinscall, England, United Kingdom, is a manufacturer of self-adhesive tapes. The company specializes in advanced self-adhesive anti-slip tapes, catering to various industries and applications. It offers a comprehensive range of anti-slip tapes, including abrasive, non-abrasive, glow-in-the-dark, and custom-printed options. These tapes provide enhanced safety by preventing slips and falls, making the tapes ideal for use in industrial settings, warehouses, healthcare facilities, and even marine environments. The products have superior durability, easy application, and adaptability in diverse conditions. It is ISO9000:2015 and ISO 14001 standards compliant and makes tapes of any shapes, sizes, and colors.
Saint-Gobain Tape Solutions, established in 1963, is a manufacturer of tapes, including adhesive, bonding, gaskets, and spacer tapes targeting the automotive, energy, building & construction, industrial, and electrical markets. Saint-Gobain Tape Solutions offer custom solutions, with 139 projects opened in the last twelve months and three new projects each week. The company in Bengaluru, Karnataka, India, has gasketing foams that eliminate the sticky problems that come with sealants, elastomeric foam tapes are also available with or without adhesive.
MBK Tape Solutions was founded in 1971 and currently operates out of Chatsworth, California under the Boyd Corporation umbrella. MBK is an ISO 9001-2015 certified manufacturer and fabricator of adhesive tape and flexible material that offers bonding, surface protection, sealing, and thermal management solutions. The company specializes in the healthcare, electronics, and industrial industries. The company offers several customer services including die cutting, printing, sheeting, and packaging. In addition, the company offers product development, cleanroom manufacturing, and contract manufacturing to customers.
Converters, Inc. was founded in 1968 and is located in Philadelphia in Huntingdon Valley, Pennsylvania. The company is an ISO 9001:2015 certified manufacturer and custom provider of adhesive components for industries such as electronics, automotive, aerospace, and manufacturing. Medical uses for the company’s products include bandages, cosmetics, medical device components, and drug delivery systems. Products of medical tapes include transpore polyethylene tape, micropore paper tape, durable cloth tape, zinc-oxide tape, and waterproof tape. The company’s other services include custom die cutting, precision tape slitting, lamination services, and prototyping.
Chemsol was founded in 1978 and is headquartered in Indianapolis, Indiana. The company is a manufacturer of specialty chemicals and paints for use in manufacturing, military, and other markets requiring non-slip safety paint and related products. Customers include Walbridge, Crown, Disney for use in theme parks, and John Deere. The company’s products are in two categories, Military Spec, and Non-Slip. Military Spec products include paints, coatings, corrosion-preventative compounds, lubricants, and others. Non-Slip categories include easily applicable DIY paint, barefoot-friendly paint, high-traffic-grade paint, and military-grade paint.
Budnick Converting, Inc. was founded in 1952 and is headquartered in Columbia, Illinois. The company is an adhesive coating converter, converting adhesive-coated tapes, foams, films, foils, and other specialty materials from other major manufacturers. Many customers are in industries such as aerospace, automotive, electronics, energy, and marine industries. The company offers a host of other converting services including precision and die cutting, spooling and finishing, laminating and coating, and printing. The company also provides process audit, prototyping, and inventory management assistance.
Alpha Packaging, Inc. was founded in 187 and is headquartered in Greenwood, Arkansas. Alpha Packaging is a producer of custom packaging materials. Alpha Packaging offers custom services including custom packaging, custom foam and package filling, as well as custom printing. Product offerings include box foam inserts, corrugated boxes of various flute profiles, die cut boxes, corrugated plastic shipping boxes, mailer boxes, and heavy duty shipping boxes. Box foam inserts include anti-static foam, and foam pouches, rolls, and edge protectors. Plastic shipping boxes include numerous options such as reusable, tamper-resistant, and shock-resistant. Mailer boxes include boxes, tubes, envelopes, and packing list envelopes.
Iwata Mfg. Co., Ltd., established in 1966 and headquartered in Gifu, Japan, is a manufacturer of commercial machinery components and power transmission equipment. The company offers a wide range of products, including bearing rollers, end plates, leveling systems, nameplates, and seals. It also provides set collars, shims, sensor brackets, and trims. Its product requires less maintenance than oil-injected air compressors because it doesn't require oil changes or filter replacements. It serves a diverse range of industries, including coating applications, refinishing applications, manufacturing, and vacuum pumps.
Advance Tapes International is a manufacturer and supplier of adhesive tapes based in Leicester, UK with an additional facility in France and founded in 1964. The company’s product portfolio includes pressure-sensitive cloth, duct, masking, PVC, and double-sided tapes used in various applications in the military, building & construction, nuclear, industrial consumables, and agriculture sectors. It has achieved the ISO 9001:2015 and BS5750 quality standard certifications and is a member of the European Adhesive Tape Association.
OLEJÁR, spol. s r.o, established in 2005 and based in Bardejov, Slovakia, is a manufacturer and supplier of fiberglass products and solutions. Its product portfolio includes a range of tactile indicators, stair nosings, anti-slip tapes, hygienic handles, and facility markings. They are used mainly for safety flooring of visual impairment for warning of hazards to make traveling easier. The company also offers expert advice through professionals, maintenance services, tested and certified products.
Watco UK Ltd, founded in 1927 and based in Birmingham, United Kingdom, is a manufacturer and supplier of industrial paint, repair, and maintenance materials. The company produces products such as dustproofers and sealers for concrete surfaces. With epoxy repair mortars, fillers, and sealants, all types of damages or repairs are fixed. The paints produced by the company are used for cold curing, rapid drying, and chemical-resistant formulations. The self-adhesive tapes of Watco come in different colours, sizes, and grades, and coatings are tested for abrasion resistance, water permeability, and impact resistance.
Tape India is an exporter, importer and supplier of various assortments of industrial tapes and adhesives, established in 1957 at Chennai, India. The company is a major supplier of contemporary adhesive materials and tapes for multiple uses in various industries including packaging. The products comprise BOPP tapes, foam tapes, double-sided tapes, floor marking tapes and copper foil tapes that offers robust packaging solutions. These tapes also find uses in electrical, construction industries and fluid control applications. The tapes are anti-slip, anti-dust and have moisture-repelling capacities that offer endurance, sustainability and performance. They allow tape length selection based on the needs.
Traffic Safety Warehouse is based in Deerfield, Illinois. Draffic Safety Warehouse is a wholesale direct marketer of traffic safety, work zone safety, pedestrian safety, crew safety, crowd control and other products, mostly made in the USA. Traffic Safety Warehouse generally serves other distributors, construction companies, utilities, educational intuitions, and municipal governments. A few examples of products include numerous types of barricades, facility safety devices, lights, parking lot safety, and work zone safety accessories.
R. P. Crawfard Co., Inc. began in 1962 in Pittsburgh, PA. RPC primarily develops and sells industrial products but also sells and promotional and consumer products. Industrial product lines include pallet racks and other material handling equipment, warehouse equipment including platforms and production tables, and storage shelving. Promotional and consumer products include apparel with and without logos, technology-related products, backpacks, bags, and coolers, pens and markers, drinkware, flags, and umbrellas.
Green Rubber Kennedy Ag (GRKA) is the merger of two companies, both born in California’s Salinas Valley in 1990. The company has several distribution segments including Food Processing, Transportation & Baggage Handling, Wine and Brewing, Recycling, and Mining, Sand, and Gravel. The company excels in conveyor belt and related materials and also offers abrasion control products, sheet products & rubber goods, safety and sanitation products, industrial hose and assemblies, as well as offering specialized services.
Dot Systems was founded in 1979 and operates out of Dayton, Ohio. Dot Systems is a distributor of packaging supplies, machines, and tools. Dot Systems products include mailers, poly bags, stretch film, tape, VCI paper, packaging list envelopes, staples, staplers, adhesives, labels, plastic & steel strapping, bubble, foam, loose fill, packaging equipment, corrugated boxes, various packaging solution including foams, and pads. Additionally, machinery such as stretch wrappers, palletizers, automatic vehicle guidance machines, strapping machines, and stretch wrap machines are available for sale and service.
bisco industries was founded in Chicago, Illinois in 1973 and now is headquartered in Anaheim, California. bisco industries is a distributor of electronic components and fasteners used for production in aerospace, communication, computer, fabrication, industrial equipment, instrumentation, marine, and military industries. Some of bisco’s product offerings include fasteners such as nuts and washers, hardware such as casters and bearings, door and access hardware including handles and hinges, electronic connectors including circular connectors and terminal blocks, enclosures such as cabinets and rack components, and wires and cables including wire and cable management including sleeving and tubing.
Abatix was established in 1983 and has offices across the United States. Abatix is a distributor of products for the general construction, industrial safety, petrochemical, energy, environmental, hospital, fire and water restoration, and disaster response industries. Abatix product offerings include abrasives, adhesives, tapes, building material & hardware, chemicals, lubricants, electrical, fall protection, gloves, hand tools, janitorial & facilities maintenance, jobsite supplies, material handling, personal protective clothing, poly sheeting, bags, power tools, restoration & environmental equipment, safety equipment, signs, tags, labels, test equipment & instrumentation, and welding & soldering.
Ranking as of November 2024
Derivation MethodRank | Company | Click Share |
---|---|---|
1 | Shanghai Jian & Mei Industry and Trade Co., Ltd. |
14.8%
|
2 | Fujian Youyi Adhesive Tape Group Co., Ltd |
11.5%
|
3 | Suzhou Tongxie Adhesive Tape Co., Ltd |
9.8%
|
4 | Jessup Manufacturing |
9.8%
|
5 | tesa SE |
8.2%
|
6 | Advance Tapes International Ltd. |
4.9%
|
7 | KENT (United Kingdom) Ltd. |
3.3%
|
8 | AVATACK |
3.3%
|
9 | Sure-Foot Industries Corp. |
3.3%
|
10 | GTG Manufacturing Sdn. Bhd |
3.3%
|
Derivation Method
The ranking is calculated based on the click share within the anti-slip tape page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
Country | Number of Companies | Share (%) |
---|---|---|
United States of America | 28 | 57.1% |
United Kingdom | 7 | 14.3% |
India | 4 | 8.2% |
China | 3 | 6.1% |
Japan | 2 | 4.1% |
Taiwan | 2 | 4.1% |
Germany | 1 | 2.0% |
Malaysia | 1 | 2.0% |
Slovakia | 1 | 2.0% |
21 products are listed.
Nitto El Material Co., Ltd.
30+ people viewing
It has a variety of designs with a phosphorescent function and non -slip. ■ Characteristics ・ Absorbs light such as solar, fluorescent lamps, whi...
Nitto El Material Co., Ltd.
30+ people viewing
■ You can easily get a slip effect just by pasting It is an indispensable tape for safe walking and safe work. ■ Characteristics ・ Because alumin...
Nitto El Material Co., Ltd.
30+ people viewing
Non -slip tape that is gentle on bare feet for rubber type. It is an indispensable tape for safe walking and safe work, which is easy to get a slip...
Nitto El Material Co., Ltd.
30+ people viewing
A tape that prevents slips in slippery areas such as stairs, slopes, and in a dangerous workshop. It is an aluminum foil base material slip prevent...
Nitto El Material Co., Ltd.
20+ people viewing
It has a full color and has a variety of designs and slip. ■ Characteristics ・ Because it is printed on the back of the non -slip layer, it is di...
Nitto El Material Co., Ltd.
30+ people viewing
A tape that prevents slips in slippery areas such as stairs, slopes, and in a dangerous workshop. Film base material slip prevention tape for smoo...
Nitto El Material Co., Ltd.
30+ people viewing
A non -slip tape that can obtain a slip effect without impairing the design. It is also ideal for protecting line tape and other protection, and is...