All Categories
History
This section provides an overview for compression springs as well as their applications and principles. Also, please take a look at the list of 106 compression spring manufacturers and their company rankings. Here are the top-ranked compression spring companies as of December, 2024: 1.Fennell Spring Company, 2.YuDiing Enterprise Co., Ltd., 3.Hennig Inc..
Table of Contents
Categories Related to Compression Springs
Engaged in research on nitride semiconductor growth using the MBE method at Waseda University Graduate School. After graduating from graduate school in 2016, he joined a non-ferrous metal manufacturer.
Engaged in equipment maintenance and engineering work at metal smelting plants. Moved to a chemical manufacturer in 2022. Engaging in similar tasks.
A compression spring, also known as a compression coil spring, is used to absorb shock or support weight by utilizing the reaction force of a compressed spring. It's the most common type of spring, typically cylindrical, but comes in various forms depending on its application and location. For instance, the spring inside a ballpoint pen, which helps return the pen tip, is a type of compression spring.
Compression springs are primarily divided into "equal pitch coil springs" and "unequal pitch coil springs," chosen based on load requirements and function.
Equal-pitch coil springs are perfectly cylindrical and exhibit a linear relationship between load and deflection. This linearity simplifies design and mathematical modeling. However, actual springs may differ from calculated values, particularly below 30% and above 70% of total deflection. This variance is due to end adhesion during compression, which slightly alters the effective number of coils.
These springs are used in applications such as gas-regulating valves, automobile suspensions, motorcycle clutches, retractable pens, spring beds, suitcase locks, and computer keyboards.
Unequal pitch coil springs, varying in shape, exhibit a non-linear load-deflection relationship.
Used in various applications, these springs are typically conical or barrel-shaped and found in battery case contact springs, foot switches, cock valves, space-saving springs, coffee filter handles, and in dampers for car suspensions and bridges.
Beyond "equal pitch coil springs" and "unequal pitch coil springs," there are numerous custom compression coil spring designs, each tailored for specific applications. The default winding direction is right-hand unless otherwise specified.
When selecting a compression coil spring, factors such as spring constant, free length, and outside diameter are critical. The operational range is from the free length (no load) to the maximum allowable compression length. Proper installation often involves securing the springs at both ends with specific components, like spring washers.
Typically used under static load conditions, these springs should be selected so that their stress remains within the elastic limit of the material. It's recommended to use springs where the maximum stress is below 80% of the material's specified allowable torsional stress.
*Including some distributors, etc.
Sort by Features
Sort by Area
Hennig Inc. is a manufacturer and service provider specializing in facility and machine safety products that was established in Illinois, USA, in 1950. The company mainly produces chip and coolant management, facility control, and machine protection solutions. These products include chip conveyors and filtration equipment for increasing machining accuracy, cable carriers to guide and protect lines on machinery, and protection systems such as auto-shutoff operators. The company’s products are commonly used in manufacturing facilities, standby power systems, and public maintenance facilities.
Fennell Spring Company, founded in 1945 and headquartered in New York, USA, is a manufacturer of precision springs. The company supplies precision springs and wire forms for various applications including automotive, aerospace, and medical. These springs and wire forms are offered in diameters of .005 inches to .250 inches in various raw and pre-plated materials. The product range includes torsion & clutch springs, extension springs, and compression springs. The company complies with the quality standards of ISO 9001:2015 and CQI-9.
Coiling Technologies, Inc., established in 1976 and headquartered in Houston, Texas, is an ISO certified custom spring manufacturer catering to industries like aerospace, defense, medical, and transportation. Holding ISO 9001:2015 certification for quality management, the company produces various springs such as compression springs for shock absorption, extension springs for tension, torsion springs for energy storage, wave springs for controlled motion, and wire forms for various applications. Beyond springs, It also offers services like heat treating, powder coating, and assembly.
Kelco Industries, founded in 1905 and based in Woodstock, Illinois, USA, is a manufacturer and supplier of custom components for industrial equipment and unique assembly challenges. Its offerings include electromechanical components, seals and sealing elements, and flexible metal solutions. Some of its products are flight control grips, solenoids, and injection molded plastic components. The company maintains strict standards and is certified as being in conformance with NSF-ISR ISO1 14001:2015, and NSF-ISR AS9100D with ISO9001:2015 certifications.
Gifford Spring Company, established in 1984 and headquartered in Garland, Texas, United States, is a manufacturer and supplier of precision springs for original equipment manufacturers. The company's core products include wire forms, compression springs, and torsion springs. These products are used in various products and equipment, including home appliances, medical devices, and agricultural tools. Its services include prototyping, custom design, and engineering. It serves various sectors, including retail store equipment, outdoor sporting goods, and aerospace component manufacturers.
Peterson Spring is a manufacturer and supplier of springs, wire forms, and related products. Established in 1914, the company is headquartered in Southfield, Michigan, USA. The company's main activities revolve around designing, engineering, and producing a wide array of springs and wire forms such as springs, snap-rings, wire forms, clips, clamps, stampings, and other types of sub-assemblies for various industries including automotive, aerospace, and medical. Its main services include precision manufacturing, rapid prototyping, and engineering support. Peterson Spring also specializes in offering customized solutions to meet specific customer needs
Rotor Clip Company Inc. established in 1957, and based in New York, USA, is a manufacturer and supplier of rings and springs. The product portfolio includes retaining rings, wave springs, and hose clamps with ISO and other certifications. The products are used in various industries which include automotive, aerospace, defense, medical, energy, and industrial. The company also offers customized solutions, package options, quality control, and technical support with quality-engineered expertise for the right part and correct applications
Progressive Components, a company established in 1987, is based in Illinois, United States, as a manufacturer and distributor of production tooling components. Its specialization is manufacturing ejector pins, undercut release mechanisms, parting line sequence control, electrical connectors, and rapid tooling inserts. It also manufactures mold components, such as blades, bushings, core pins, counters, and date inserts. The company has acquired ISO 9001:2015 certification for its quality management system. Its extensive portfolio caters to a wide range of industries, including automotive, electronics, manufacturing, and construction industries across India, South Africa, Taiwan, and Italy.
Lesjofors Springs America, Inc., established in 1852 and headquartered in Pittston, Pennsylvania, USA, is a manufacturer of industrial springs and presses. The company offers a diverse range of products, including compression springs, extension springs, torsion springs, and gas springs. These optimal-quality springs provide solid durability, precision, and stability, delivering optimal performance in various applications. It serves a wide array of industries, including automotive, aerospace, electronics, and manufacturing, where the springs are employed in machinery, vehicles, and other critical systems.
Fischer-Brodbeck GmbH, also known as FIBRO, is a manufacturer of standard parts for the sheet metal and molding industry that was founded in Weinsberg, Germany, in 1958. It produces threads, electromechanical transporters, molds, and other products for the auto, electronic, and home appliances industries. The company operates globally, with branches in France, Poland, the USA, India, Singapore, Korea, and China, in compliance with DIN ISO 9001 and DIN EN ISO 14001 standards.
Dayton Lamina is a subsidiary of MISUMI Group Inc. formed in 2014 in Ohio and is the manufacturer and supplier of a diverse range of metal stamping products, dies, punches, and more. Dayton Lamina is subsumed by other brands namely, Lempco, Danly IEM, Lamina, and Dayton Progress. Each of these brands has its own production line such as Lempco serves the canning, electronics, and automotive industry with its die set guidance system. Danly IEM manufactures die and mold components along with Lamina. Dayton Progress designs catalogs and brochures for the die and punch market.
Plan Tech, Inc. is a manufacturer of polyurethane (PU) parts and components that was established in Loudon, New Hampshire in 1989. The company produces various PU blocks, rods, bars, and 70a durometer sheets, as well as PU-coated standard and abrasion-resistant bearings. These are used in a wide range of industrial processes, including food processing, computer chip manufacturing, and material handling. Aside from their products, Plan Tech, Inc. also offers inhouse waterjet cutting and custom mold manufacturing services for customer projects with unique specifications.
Lee Spring Company, founded in 1918, is an American manufacturer headquartered in Brooklyn, New York, specializing in custom springs. The company produces various custom springs, including compression, extension, and torsion springs. Under brands such as REDUX, HEFTY, and LeeP, the company offers wave, die, and plastic composite springs. Other types of springs, like battery, constant force, and continuous length extension springs, are also available. The company also provides MIL-SPEC spring series, MS24584 and MS24586, meeting the technical requirements for military and aerospace applications. Additionally, the company offers Belleville washers, used in compression spring applications that require high loads within limited spaces.
Zauderer Associates, Inc., established in 1954, is a US-based custom component parts and assemblies representative agency headquartered in Rockmart, Georgia. The company provides sales coverage, engineering assistance, and manufacturer sourcing for standard and custom-made products, such as air circulation equipment, metals, polyurethane films, springs, and riveting. The company serves various commercial markets and manufacturers, including the agriculture, construction, medical, energy, and transportation industries. Common applications for their sourced components are residential appliances, furniture, aircraft, and apparel.
Wisconsin Oven Corporation has operated since 1973 and is located in East Troy, Wisconsin. Wisconsin Oven designs, engineers, and manufactures industrial ovens and other heating equipment for numerous applications including heat treating, powder coating, paper pulp drying, finishing, drying, and curing in the aerospace, automotive, composite, energy, finishing, foundry, heat treating, annealing, military, and pharmaceutical industries. Types of ovens and equipment include custom and standard batch ovens, conveyor ovens, pollution control equipment, and walk-in ovens.
Wardzala Industries, Inc., founded in 1990 and located in Franklin Park, Illinois, is a custom manufacturer of metal CNC wire forms and point of purchase (POP) displays. The company is engaged in producing metal stamping and wire form assemblies, which serve a wide array of applications including automotive, home appliances, and POP displays. Its capabilities have been expanded with several CNC equipment, including CNC wire bending, wire mesh welding machines, CNC press brakes, spring machines, and laser cutting machines, while its specialization extends to the design and fabrication of proprietary tooling like progressive stamping dies, four slides, and multi-slide tooling.
Vulcan Spring and Mfg. Co. has been a manufacturer of custom springs and assemblies since 1967, based in Telford, PA, USA. The company provides springs for various industries, including aerospace, automotive, medical, and retail displays. Their machinery and engineering expertise provides custom solutions that meet the most challenging applications. They are a USA-based, ISO-certified supplier. They are also SMI certified, Thomas verified suppliers, and a PMA member. Vulcan has global recognition from Tier 1 OEMs, design firms, and contract manufacturers. They also distribute steel strapping, seals, and tools to meet industrial bundling requirements.
Tricor Industries, Inc., is located in King of Prussia, Pennsylvania and was founded in 1984 as a manufacturer of Precision Springs and Wire forms. The company's extensive selection includes compression springs, extension springs, torsion springs, flat springs, and coil springs They even deal in custom springs, conical springs, helical springs, and die springs. They also offer a comprehensive line of stock springs which includes compression and extension Military Standard (MS) Springs. The wire inventory comprises of Alloy strips and wires of various categories like non-ferrous, high temperature and alloy steel, besides that stainless steel and carbon steel are also included.
Timac Spring Manufacturing is an ISO certified spring and wire form manufacturer based in Xenia, Ohio, USA, and founded in 1979. The company utilizes CNC machining to customize springs and wire forms to customer specifications and offers compression, extension, flat, and torsion springs in various sizes and materials. Their products, which they offer in large or small quantities as well as individual prototypes, are used in automotive, toy, aerospace, and military industries.
The D.R. Templeman Co. (DRT) is a Plainville, Connecticut-based manufacturer of custom springs and wire forms at sizes ranging from 0.004” to 0.080”. Founded in 1938, the company serves various multinational OEMs including Boston Scientific, Rubbermaid, ITW, and Tyco. The company produces a range of springs, such as torsion and compression models utilized in medical and electronic devices, as well as functional components like custom rings for sealing or connecting, and wire forms for fastening or guiding. DRT also offers various stock springs, along with quality control, testing, packaging and shipping services.
T.E. Kent Associates, Inc. is a manufacturers' representative company based in Minnesota, USA. Founded in 1972, the company specializes in representing manufacturers to its customers. The company's expertise lies in connecting manufacturers with customers and providing support throughout sales. The company also offers diverse manufacturing capabilities, which include sheet metal fabrication, plastic extrusions, CNC machining, springs, injection molding, and vacuum forming. The company has partnerships with J&E Company, ER Wagner, nSight Manufacturing, Crafted Plastics Inc., Quality Molding Inc., and more.
SDP/SI was founded in 1950 and is situated in New Hyde Park, New York. SDPP/SI is a manufacturer of precision gears and high-quality mechanical components used in the aerospace, industrial manufacturing, medical technology, and robotics fields. The company manufactures parts in a variety of materials including alloy steel, stainless steel, bronze, brass, nylon, and titanium. The company also provides coating services such as heat treating, zinc plating, and painting. Additional custom options are available including manufacturing to customer drawings and specifications.
Spring Manufacturing Corp., established in 1979 with headquarters in the USA, is a custom manufacturer of precision springs and metal components for the aerospace, military, and medical industries. The company's products include numerous flat-form springs, compression springs, extension springs, torsion springs, and wire forms. Spring Manufacturing Corp. also provides customers with custom design, engineering, and manufacturing of components to meet specific requirements. For example, they provided design assistance during the design phase of a latch slide spring clip part used in a heart pump battery pack.
Southern Spring and Stamping, Inc., established in 1957, is a manufacturer and supplier of springs, sheet metal fabrications, and stampings for industries such as aerospace, agriculture, electrical & electronics, construction, and pharmaceutical. The company has in-house capabilities such as painting, powder coating, and silk screening. The company is in Venice, Florida, and offers services such as CNC machining, four-slide & Vertislide forming, laser cutting, tool & die making, and welding. The company is family-run and implements the ISO 9001-certified quality management program.
Based in Bayville, NY, SAE Manufacturing Specialties Corp. is an ISO-certified supplier and manufacturer of industrial equipment, chemicals, components, ordinance, electronics, and systems for industries ranging from aerospace to high tech to law enforcement. Examples of product offerings include raw materials, chemicals, and lubricants for industrial purposes to finished products such as security helmets for law enforcement, and military ordnances. SAE also provides research and development as well as technical support for other companies in similar industries.
Rockford Ball Screw, a company founded in 1973, based in Rockford, Illinois, is a manufacturer and supplier of ball screws. The company offers flagship products which include ball screws and guide rail products with various configurations and custom specifications. The products are desigend with the latest advanced technology in ball-screw and linear guide rail technology. These products are used in multiple commercial and industrial machinery applications. The company also offers services and repairs with unique linear motion techniques.
READY Technology is the North American operation of a worldwide network of factories and branch offices and is based in Dayton, Ohio. The company manufactures and distributes components to the global metal stamping, plastic mold, and automation industries. The company is ISO 9001 certified and operates through the READY brand as well as Acrotech, Amcor, Associated Raymond Spring, and other brand names. The company’s product categories include Ready Benders, Ready SuperSprings, Nitrogen Gas Springs, Cam Units, and Guiding Elements. The company offers custom machining services for die sets, raw plates, and everything up to finished products.
R.C. Coil Spring Mfg. Co., Inc. is a tight tolerance parts manufacturer established in 1959 in Glendale Heights, Illinois. The company specializes in producing various types of springs, including compression, extension, and tapered springs, as well as metal stampings, wire forms, and wire rings. Additionally, the company aids in the development of prototypes in the form of samples and small production runs. Its time-efficient approach enables a flexible turnaround of 4 to 5 weeks, which can be shortened under favorable circumstances.
Polyurethane Products was founded in the early 1980s and is headquartered in Addison, Illinois. The company is a manufacturer of polyurethane products, polyurethane metal fabrication tooling, and steel brake tooling for any both individual and industrial-scale projects. The company’s polyurethane metal fabrication tooling line includes radius tooling, press brake tooling, and urethane springs subdivisions which encompass custom radius tooling, hemming dies, and compression springs. Stock and standard products include urethane bumpers, coil storage, custom machining, mold making, and food-grade polyurethane.
MGM Manufacturing Alliance Corp. is a manufacturer based in Southern California, specializing in crafting precision CNC machined and fabricated components for various industries. The company’s manufacturing capabilities include CNC machining, micro-machining, sheet metal forming, gear cutting, and more. They fabricate build-to-print components from alloys such as tool steel, stainless steel, aluminum and other alloys. The company can also machine components from industrial-grade plastics such as; Delrin, Vespel, nylon and other plastic polymers. With in-house capabilities, MGM Manufacturing Alliance Corp. offers personalized service and timely delivery serving clients in diverse industries including aerospace, automotive, medical, and more.
Metal Works Corporation was incorporated in 1956 and is based in Baton Rouge, Louisiana. The company is a specialty metal manufacturer with skills in the fabrication of specialty springs of all alloys from aluminum to zirconium, custom rotating mechanical seals, and various other industrial components. The company manufactures all products in-house in Louisiana and ships to domestic and foreign customers to industries such as chemical plants, petroleum refiners, paper mills, and maritime.
MCMILLANCO, LLC is a manufacturer that provides custom component manufacturing solutions, based in West Liberty, Ohio. The services provided by MCMILLANCO, LLC are primarily focused on manufacturing processes. They offer services such as aluminum sand casting foundry, machining, metal stamping, injection molding, and vapor deposition coating. These services are utilized in the manufacturing industry to produce components, parts, and finished products such as in medical device manufacturing, steel fabrication, natural gas, defense, and film production.
Master Spring & Wire Form Co., founded in Roselle, Illinois, in 1983, is a manufacturer of custom CNC wire forms and industrial coil springs. The company's product portfolio includes Custom Compression Springs, Custom Torsion Springs and torsion springs. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company provides services such as Product Selection Guidance, Engineering Support, New Product Design and Development and Custom Manufacturing.
LGM, Ltd. began operations in May, 1985 and is headquartered in Maiden, North Carolina. The ISO 9001:2015 certified company is a manufacturer of custom rope and wire products, operating as a division of Jelliff Corporation. The company’s 2 primary product lines are custom rope heaters and custom wound ignition core. Flexible rope wire, often known as rope heater, can be made in resistance ranging from 5 ohm to 1500 ohms per foot and using alloys including stainless steel, copper, and nickel. Custom wire options included primary and secondary spring types, materials used, and spring end types.
Lexco Cable began in 1952 in Chicago, Illinois. Lexco Cable is a leading manufacturer of wire rope, cable, and bungee cord assemblies and is ISO 001 certified. Lexco has built products to specification for military, Boeing, federal use, NSN specifications, and ASTM standards. Lexco offers wire rope, wire rope fitting, hardware & tools, architectural cable railings, push-pull controls, and bungee cords. All rope and cord products are available in different varieties. Custom assemblies and guides are also available.
General Wire Spring Co., established in Pittsburgh, PA, in 1930 is a manufacturer of custom springs and wires stamping machines, and assembly lines, that are used to provide controlled force, tension, or compression. Their product portfolio includes compression springs, extension springs, torsion springs, wire forms and spring materials. The company's products are used in industries such as Industrial Machinery, Electronics, Automotive and Electrical Equipment. The company has a national distribution network and a customer support center.
Gardner Spring, Inc., since 1907, has been a manufacturer and supplier of springs such as compression springs, extension springs, disc springs, and extensions such as safety drawbar extensions, utility extensions, double-looped extensions, cot extensions, and ulta precision extensions used in OEM, industrial, kitchen appliances, aerospace components, and hardware industries. Located in Tulsa, OK, the company is woman-controlled and a member of the National Association of Manufacturers, C200, Spring Manufaturer Institute, Ahma, and Tama associations.
ESI Engineering Specialties, Inc. started in 1990 and is headquartered in North Branford, Connecticut. The company is a designer and manufacturer of automated assembly machines and components using Six Sigma strategies. Many customers are in automotive, aerospace, medical, energy, and other fail-safe industries. The company’s production capabilities include production metal stamping, tool & die making, automated assembly, custom-engineered fasteners, and CNC machining. The company also offers laser marking services used in snowboard roof racks, aerospace valves, and firearms.
Draco Spring Mfg. Co., since 1969, has been a manufacturer of springs and wire forms/stampings. The springs are leaf springs, tapered springs, helical springs, garter springs, and clock springs, whereas the wire forms include snap rings, spring clips, sway bars, eye bolts, and football sled springs. The products are used in nuclear power, medical devices, mass transportation, automotive, and farm equipment. Located in Houston, TX, the company is ISO 9001:2015 certified with capabilities such as stocking programs, metal forming, coatings, and hot & cold coils and provides services such as parkerizing, load testing, and centerless grinding.
C & F Wire Products, established in 1995, is a manufacturer of precision custom springs such as compression, torsion, extension, and battery-contact springs, used in electronics, industrial, recreational, military and computer industries. The company located in Stanton, CA, offers services such as automatic or short-run coiling, special packaging, research & development assistance, product assembling, and in-house vibratory Tumbling. The company is ISO 9001:2015 certified and a member of the West Coast Spring Manufactures Association (WCSMA) and Spring Manufactures Institute (SMI).
Bauer Springs, Inc. founded in Pittsburgh, PA in 1940 is a manufacturer of disc springs and subassemblies for vane pumps. The company's product portfolio includes Belleville washers, conical washers, high-grade steels and alloys, to ensure the durability and reliability of the products and tailor-made disc springs and subassemblies to suit diverse vane pump applications. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation.
Bansbach easylift is a manufacturer of motion control solutions, since 1919 producing a wide range of lockable gas springs, dampers, shock absorbers, and connecting parts. Based in Melbourne, Florida, Bansbach easylift has ISO 9001:2008 certification, ITAR Registration, and EASA Part 21G Form 1 certification. The company uses environmentally friendly materials along with stringent QC measures for consistent and accurate production. Their products are applied in diverse range of industries including automotive, furniture, machinery, medical, and aerospace.
Argo Spring Manufacturing Co., established in 1996 with facilities in the USA, is a manufacturer of springs, metal stampings, wireforms, four-slide products, and assemblies. The company's products include compression, extension, torsion, double torsion, clock, and leaf springs made from carbon steel, stainless steel, copper, nickel, and brass. Argo Spring Manufacturing Co. also offers four-slide stamping, screw machining, press brake forming, wire forming, and tube bending services. The company serves the aerospace, commercial, military, government, medical, and telecommunications industries, among others.
Anderson Quality Spring Manufacturing, established in 1993 with facilities in the USA, is a Custom manufacturer of precision springs used in the agricultural, construction, HVAC, and electronics industries. The company's products include compression springs, custom wire forms, carbon steel wave springs, and flat wound springs, such as clock springs and spiral torsion springs, made from chrome silicon, beryllium copper, stainless steel, and phosphor bronze. Anderson Quality Spring Manufacturing also offers prototyping and production in high volumes.
AARD Spring & Stamping, founded in Temecula, CA , in 1970 is a manufacturer of springs, wire forms, four slide & stamping products. The company's product portfolio includes Double Torsion Spring for the Medical Industry, Lock Latch for the Communications Industry, Extension Spring with Formed End for the Music Industry, Large Wire Torsion Spring for the Construction Industry and Wire Form for the Lighting industry. The company provides services such as Product Selection Guidance, Engineering Support, New Product Design and Development and Custom Manufacturing.
3Axis Development was founded in 2005 and is headquartered in Boynton Beach, Florida. 3Axis is a manufacturer of custom machinery, equipment, and tools. 3Axis offers prototyping services such as stereolithography, FDM, SLS, DMLS, 3D architectural modeling, and 3D printing. 3Axis also offers numerous manufacturing services such as injection molding, plastic prototype extrusions, waterjet cutting, precision sand castings, sheet metal fabrication, vacuum & pressure forming, Swiss CNC machining, carbon fiber prototypes, 3D custom signage, fiberglass fabrication, and medical device engineering.
Spiros Industries is an ISO 13485:2016 and IATF 16949:2016-certified custom manufacturer of springs and wire forms for OEMs established in 1991 and located in West Bend, Wisconsin, USA. The company produces extension springs for providing tension when extended, compression springs for standard spring force applications such as in car suspensions, and torsion springs for rotational applications. It also offers wire forms shaped and sized to customer specifications. The company mainly serves OEMs in the automotive, machine tools, and home appliance industries.
Smalley, established in the USA in 1963 is a manufacturer engaged in wave springs, retaining rings, and constant section rings. The company has a 300,000 square foot facility in the USA, global sales offices, and distributors all around the world. The company's products are produced in accordance with the requirements of ISO 13485:2016, ISO 9001:2015, and ISO 14001:2015. The company provides how to do guides, best practices and material catalogues online to the customers.
Southington Tool & Manufacturing Corp. (STMC) is a manufacturer and distributor of metal stampings and wire formed products that was established in Plantsville, Connecticut in 1970. The company primarily produces power press metal stampings formed by punch and die processes, as well as fourslide stampings shaped and sized using quadruple slide cutting machines. They also offer CNC wire formed products like hooks, rings, and pins. STMC products are used by various clients in the industrial sector, including in aerospace, defense, transportation, and construction.
S.W. Anderson Co. was founded in 1926 and is based in Farmingdale, New York. S.W. Anderson is a customer-based manufacturer and distributor of specialty fasteners, standard fasteners, and other OEM products. S.W. Anderson’s product lineup includes numerous segments including inserts, bearings, fasteners, slides, and isolators. S.W. Anderson distributes from many manufacturers including PEM, Stanley, Hutchinson, Acuuride, and Heyco. S.W. Anderson's services include vendor-managed inventory programs, advanced supply chain management, and order management.
Production Materials Inc. was founded in 1981 and headquartered near Chicago in Wheeling, Illinois. The company is an ISO 9001:2015 certified distributor of fasteners and related components such as nuts, washers, and bolts to manufacturers as well as individuals. The company provides option types such as material, coating, and threading. The company also prototypes and designs parts and offers customization options on many of the parts available. The company also assists customers in the consolidation and standardization of existing parts along with inventory management assistance.
OneMonroe was founded in the 1920s and is located in Rochester Hills, Michigan. OneMonroe is an ISO 9001:2015 and AS9100D certified global industrial manufacturing company serving several types of customers including manufacturers, distributors and catalog-houses across several vertical markets including aerospace/defense, automotive, medical, and transportation. Product lines include adjustable handles, bearings, casters, gaskets, hydraulic clamping, military spec hinges, molded rubber, piano hinges, pins, pull handles, quick release pins, seals, springs, toggle clamps, and various harnesses. Custom manufacturing is also available to meet specific customer needs.
Engineered Source Inc was founded in 1990 and operates out of Orange, California. Engineered Source Inc is a distributor of precision parts for numerous industries including automotive manufacturers, construction, electronics & robotics, fabrication & assembly, farm & agricultural equipment, gun manufacturers, marine & water treatment, medical manufacturers, and aerospace. Examples of specific products include custom internally threaded square pins, stainless steel pins, steel hex nuts, short dog point socket set screws, zinc plated steel material, custom stamped L brackets, painted self-drilling screws, and custom-locating dowel pins for transit gear units.
Cook-Leitch Inc. was incorporated in 1964 and serves as a distributor for engineered components and metal finishing solutions. Cook-Leitch serves a number of industries including home & commercial appliances, aerospace & defense, automotive, agriculture, fluid power & hydraulics, distribution, and heavy truck & construction equipment. Some of Cook-Leitch’s product categories include powdered metal featuring Eastern Sintered Alloys, screw machine/complex shafts featuring Precision Capital LTD, springs/wire forms/stampings featuring Wire products company, split seam tubes featuring Baker Stamping, fasteners featuring Vasco Inc, and metal finishing featuring Decal Metal Finishing, Hale Performance Coatings, and Whitaker Finishing.
BudgitHoist.com is headquartered in Forest Lawn, Illinois and is owned and operated by Sievert Electric Service and Sales Company. Sievert Electric is a distributor for Budgit Hoist who is the producer. BudgitHoist produces 1/4 to 3t electric chain hoists, air chain hoists, trolleys, repair parts, and other accessories. BudgitHoist offers additional services such overhead crane design sales, service, and repair, as well as electrical repairs and new construction. Additionally, BudgitHoist offers communication installations, repairs, and maintenance, as well as scoreboard installation repair and construction.
Gilbert Spring Co., established in 1960, located in Illinois, United States, specializing in the manufacturing and supply of springs and precision components. The company's main products include custom-made springs, wire forms, and stampings. These products are utilized in various industries, including automotive, electronics, and aerospace. Gilbert Spring Co. has expertise in creating advanced and unfailing solutions to meet the unique needs of its clients. With decades of experience, the company has ensured standard customer service, technical support, and tailored solutions to deliver quality products that exceed manufacturing standards.
DistributionNow is a brand of NOW Inc. that was founded in 1862 and is headquartered in Houston, Texas. NOW is a distributor for downstream energy and industrial products for petroleum refining, chemical processing, LNG terminals, power generation utilities, and industrial manufacturing operations around the world. NOW provides consumable maintenance, repair, and operating supplies; pipes, valves, fittings, flanges, gaskets, fasteners, electrical products, instrumentations, artificial lift, pumping solutions, valve actuation and modular process, and measurement and control equipmen safety supplies, and personal protective equipment, as well as applied products and applications, including artificial lift systems, coatings, and expendable items. NOW also offers OEM equipment.
HLC Metal Parts Co. Ltd. is an IATF 16949-certified manufacturer of precision metal parts and components founded in 2003 and based in Dongguan City, Guangdong, China. The company primarily produces custom precision metal parts using a range of in-house capabilities, such as metal stamping, CNC machining, and in-mold welding. It also offers assembly and fitting services for metal and plastic accessories. The company operates internationally, with additional locations in Mexico, Taiwan, and Bulgaria.
Baumann Springs Ltd., a company founded in 1886 and headquartered in Ermenswil, Switzerland, is a manufacturer of springs, stampings, and bent components. The company offers a wide range of products such as Springs and Wire Forms, Stampings and Bendings, and more. It also provides a range of couplings and locking assemblies.It uses alloys and advanced manufacturing processes to ensure the durability of its products. The company is ISO 9001 certified, demonstrating its adherence to infallibility processes for optimum quality of springs and stampings. It serves various industries, including automotive, medical, and industrial applications.
Nanjing Hengjie Steel Industrial Co. Ltd., established in 1957 and headquartered in Nanjing, China, is a manufacturer and distributor of value-added spring steel wire, bars, and strips. The company's primary products include oil-tempered steel wire, cold-drawn round steel bars, and hot-rolled spring flat steel. It also produces stainless wire, alloy steel bars, and irregular steel. These products have applications across industry, including for use in the production of hydraulic parts for precision machinery, highway guide rails, and railway lines. The company offers production customization options, including size, composition, and processing technologies.
HIDRACAR S.A., founded in 1974, is a Spanish manufacturer based in Manresa, Barcelona, producing pulsation dampers and oil-pneumatic accumulators. The company’s pulsation dampers, designed for circuits with dosing pumps, are manufactured in compliance with European PED97/23/CE pressure vessel regulations, AD 2000 standards, and American Society of Mechanical Engineers (ASME) codes. These dampers are available in the bellows, in-line, and membrane variants. In addition, the company provides oleo-pneumatic accumulators and shock absorbers for stroke end, elevators, and railways. Hydrostatic dynamometers, diesel engine starters, and conveyor belt tensioners are also part of the company’s product line.
Tech Spring Manufacturing Corp., established in 1987, is a metal spring manufacturer based in New Taipei City, Taiwan. The company’s offerings include standard and custom coil, compression, constant force, extension, and power springs, along with retaining, torsion, and wave springs. It also produces computerized numerical control (CNC) wire form parts, metal stampings, and precision turned parts. These products are constructed from materials chosen for their specific properties such as corrosion and water resistance, heat tolerance, rate of thermal expansion, and load-bearing capacity. They cater to diverse applications like medical devices and watches, utilizing materials like carbon, stainless steel, and other alloys.
Fusehatu Kogyo Co., Ltd., founded in 1946 with headquarters in Higashiosaka City, Japan, is a manufacturer of springs and assemblies. The company's product line includes treated and straight-cut spring materials, custom-made springs, spring assemblies, and spring units (springs, plastics, and bolts). These products are primarily made to order, and custom products can be continually produced for clients with ongoing high-volume orders. The company serves many industries, including electronics manufacturing, appliance manufacturing, and vehicle suspension makers.
Yu-Diing Enterprise Co. Ltd., established in 1981 and headquartered in Sulin City, Taipei, Taiwan, is a manufacturer of standard and custom springs. The company’s main products include die springs, nitrogen gas springs, and custom-designed round wire springs, including non-standard and wave springs. Its products are used in metalworking and metal stamping machines and automotive suspension systems. The company’s after-sales service includes equipment maintenance programs, flexible service contracts, and the supply of spare parts.
Special Springs SRL, established in 1968 and headquartered in Romano, Piemonte, Italy, is a manifold cylinders, wire dies, and gas springs manufacturer. The company's products include OSAS, unique Special Springs safety solution devices that exhaust pressure in a controlled and complete mode, hydraulic cylinders with controlled return, and nitrogen punching units. Its products are used in car crash safety testing equipment and in the metal sheet processing sector. It has a network of dealers across the globe providing after-sales service, and it also acquired VEP Automation in 2012.
Borrelly, established in 1933 and headquartered in Borrelly, France, is a spring washer manufacturer and international supplier. The company's products include wave washers, ribbon springs, and disc springs. It also provides retaining springs, thin shim washers, and diaphragm washers, stocks a wide range of standard springs, and can produce its products on demand within 48 hours. The company also offers custom high-tech spring washers designed and developed in collaboration with its clients in various industries, including medical equipment manufacturing, consumer goods manufacturing, and automotive parts production.
Normelemente KG, established in 1958 and based in Markgroningen, Baden-Wuerttemberg, is a German manufacturer and supplier that specializes in standard parts and machine components. Norelem offers an extensive catalog of more than 70,000 products, catering to the needs of engineers and designers in various projects. Their product range includes clamping technology, measuring and testing components, electromechanics, systems and components for machine and plant construction, and material handling and transport solutions. These products find applications in diverse engineering fields, such as automotive, aerospace, machinery, and robotics sectors.
Barnes Group Inc. is an ISO 9001-certified manufacturer of industrial engineering products established in Bristol, Connecticut, USA, in 1957. The company’s products include industrial molds for compression molding or plastic injection processes, and custom engineered components for the transportation industry such as springs and stampings. It also offers specialized motion control products such as nitrogen gas springs and shock absorbers. The company chiefly serves clients in the aerospace, military, and transportation sectors.
Springs Group SR, established in 2011 and headquartered in San Giovanni, Emilia-Romagna, Italy, is a specialized manufacturer of springs for industrial applications. The company's primary products include hot-wound compression coil springs, cold-wound, and compression coil springs. It also produces torsion springs, extension springs, and leaf springs. These products are used in heavy industry and railway components and various types of machinery where a rotating force is required. The company manufactures standard and custom products on demand and offers options such as liquid, electrolytic galvanizing, and burnishing surface coatings.
Resortes Galicia S.L., established in 1973 and headquartered in Barbadás, Ourense, Spain, is a manufacturer of springs and shaped wire and strips. The company's primary products include custom flat wire, round wire, and constant-force compression, traction, and torsion springs. It produces all types of springs from various materials, including inconel, nimonic, and titanium, and offers 2D and 3D wires with multiple special folded final forms. The company provides product customization options, including size and material composition.
SCHWEIZER GmbH & Co. KG is based in Reutlingen, Germany, and is a manufacturer of technical springs as well as wire bent parts founded in 1986 before being acquired by KERN-LIEBERS group in 2005. The company produces various compression, tension, disc, and magazine springs. It also offers wire bent parts with various finishes such as chrome- or gold-plating, glass bead blasting, or gloss coating. Aside from its products, the company provides custom spring assemblies for clients with unique project specifications. Its products are mainly used by customers in the automotive, aerospace, construction, and medical sectors.
FILAME SA is an ISO 9001 certified manufacturer of wire and sheet metal products established in 1960 based in Nivelles, Belgium. The company's products include standard as well as custom wire springs, laser cut sheet metal products, and stamped metal products. These include torsion springs, laser cut machine components, and single stroke stamped automotive parts. The company chiefly serves clients in the construction, industrial vehicle manufacturing, and aerospace sectors. Some of its notable clients include Caterpillar, Saint Grobain, and Lydall.
Maverick Spring Makers Limited, established in 1968 in Ontario, Canada, is a manufacturer specializing in custom springs. The company offers spring design and engineering services prior to the request for a quote (RFQ) process. By analyzing customers' supplied blueprints and understanding their specific needs, Maverick Spring Makers Limited provides assistance in material selection, pricing, and manufacturability, including cost minimization and maximizing fatigue life. Utilizing the finalized designs, the company manufactures different types of springs, including compression, extension, and torsion springs, with various custom finishes. These springs cater to a wide range of applications, such as electric motors, machinery, automotive sub-assemblies, and more.
Omniseal Solutions is based in Garden Grove, California, USA, and is a manufacturer of wear control and sealing products for the industrial sectors that was originally established as Furon in 1955. The company’s products include various electron-beam physical vapor deposition (EBPVD) materials, such as ingots. These are for incorporation into seals made with polytetrafluoroethylene (PTFE) and other plastic or rubber compound products. The company chiefly serves clients in the aerospace, automotive, and energy sectors.
Junty Ltd., established in 2000 and headquartered in Beijing, China, is an after-market mechanical seals and wear parts manufacturer and supplier. The company's products comprise two lines: engineered mechanical seal parts, including seal rings, pump bushings, and rubber components; and wear parts, such as rotors, balls, and rotary unions, using various materials, including silicon carbide, stainless steel, and PTFE, for motion and control applications in the fluid and gas industries world-wide. Junty Inc. was established in the United States in 2012 to provide sales, service, and warehousing for the North American market.
Bernhard Steinel Werkzeugmaschinenfabrik GmbH & Co. KG, established in 1925 and headquartered in Baden-Wurttemberg, Germany, is a manufacturer and supplier of sheet metal working machine tool components and parts. The company's portfolio includes spring elements, die sets, and assembled guide units designed for metalworking in punching machines. It also produces nitrogen cylinders and pressure systems, which provide a higher force output in a more compact area compared to traditional spring systems, for specialized metal punching and bending tools. Furthermore, Bernhard Steinel offers tool shop services, including spare part management, production of individual parts, and the creation of highly complex tools.
MW Industries, started in 1861 and based in North Carolina, US, is a manufacturer of a wide array of precision components and products. The company produces threaded insert screws, nuts plain, and stock extension springs. Its products are used in automotive, construction, and machinery fields across the USA, Switzerland, and China. The company holds ISO 9001, ISO 13485, and IATF 16949:2016 certifications. Its products comply with the ITAR, REACH, and RoHS standards.
Strack Norma GmbH & Co. KG, established in 1921 and headquartered in Nordrhein-Westfalen, Germany, is a toolmaking and mold-making parts manufacturer and supplier. The company's products include attachment parts, cutting elements, and gas springs. It also offers PowerMax cam units and mold construction. It offers an online product configurator and product ordering system for its stocked parts and also supplies a range of custom manufacturing and special machining services, including turning, grinding, and deep hole drilling.
Precipart was founded in 1950 and is based in Farmingdale, New York, as a manufacturer of precision mechanical components and motion control systems for various industries. The company produces precision gears, custom gearboxes, micro springs & metal stampings, and electromechanical assemblies that have applications in the aerospace, automotive, electronics, defense, and photonics industries. They also offer hearing aid components, medical devices, and technical ceramic injection molding, along with services including micro 3D printing & micro laser sintering that are required in the medical sector, hydraulic components manufacturing, and sensor & instrumentation markets.
John Evans' Sons established in New Haven, Connecticut, in 1850 is a manufacturer of constant force springs, torsion springs, and spring-powered reels/ Their product range includes helical springs, vibration isolators, wire forms, stampings, and mechanical assemblies. The company has a global distribution network, and their products are used in industries such as aircraft & aerospace, medical devices, window manufacturing, and electric motors. In 1967, the company changed ownership, and moved 20 miles northwest of Philadelphia, to Lansdale, Pennsylvania, its current office.
Jackson Spring & Mfg. Company Inc., since 1962, has been a manufacturer wire goods and springs for the automotive, agricultural, machinery, fluid sealing, and medical industries. The springs include compression, extension, torsion, and custom springs from carbon steel, copper, stainless steel, and alloy steel wire. The Elk Grove Village, Illinois, company provides surface treatment, passivating, color coating, and CAD design services. The company is ITAR registered, ISO 9901:2015 certified, and IATF 16949:2016 certified.
Badger Precision Spring, Inc., established in 1983, is a manufacturer of custom precision springs and components such as wire forms, compression springs, torsion springs, metal stampings, and extension springs for office equipment, automotive, medical, computers, and switches sectors. The company in Genoa City, WI, provides secondary operations such as spring grinding, automatic & hand looping, hand forming, stress relief, and packaging. The first piece sample is given before production, and the company is a member of the Spring Manufacturers Institute.
ANL Spring Manufacturing, founded in 1976, is a manufacturer of springs, wire forms, clips, rings, and cable assemblies. The springs are compression springs, extension springs, torsion springs, die springs, and washer springs used in the electric, manufacturing, industrial, processing, and automotive sectors. Situated in Detroit, Michigan, the company has manufacturing capabilities such as heat treating, welding, machining, electropolishing, and galvanization using materials such as low carbon, phosphor bronze, stainless steel, beryllium copper, and zinc dichromate.
EPIDOR Seals and Rubber Technology, S.L.U. is based in Lliçà de Vall, Barcelona, Spain, and is a manufacturer of sealing machines and products established in 1965 as a subsidiary of EPI Industries. The company offers mechanical seals, fastening devices such as clamps and vices, and maintenance products such as lubricants and brushes. It also offers power transmission and motion control components for machine maintenance and repair. The company is ISO 9001-certified, and chiefly serves client manufacturers of industrial machinery.
Tokai Springs industries, lnc., established in 1944 and based in Osaka, Japan, is a manufacturer and supplier specializing in the production of custom-made springs. The company offers a range of metal springs, including hot-formed compression springs, cold-formed compression springs, disc springs, flat springs, and extension springs. These springs find application in various industries, including aerospace, machine tools, robotics, architecture, seismic isolation, and various other sectors. The company holds ISO 9001, ISO 14001, and JIS Q 9100 certifications, which are accredited in accordance with ISO and JIS standards.
YAN SHIN PRECISE CO., LTD, founded in 1958 and headquartered in Taipei City, Taiwan, is a manufacturer and supplier of spring contacts. The company's product portfolio includes vehicle metal spring contacts, military antenna spring contacts, and metal clips. These products are applied in various industries, including telecommunications, manufacturing, and the military and defense industry. The company provides services including technical support, product customization, and installation, while being IATF 16949:2016 and ISO 9001:2015 certified for quality management.
Proponent grew out of the partnership between Kapco Global, founded in 1972, and Avio-Diepen, founded in 1946. The company is an aerospace distributor with a product portfolio of over 500,000 aircraft parts available for delivery to customers based around the world. The company’s product lineup has four categories: interior, engine, airframe, and cockpit. The company’s services and solutions include resources for manufacturers, suppliers, and end users. The company also offers water jet machining, turnkey design, fabrication, finishing, and assembly customizations according to customer preferences.
Murphy & Read Spring Mfg. Co., Inc. (MRS) is an American ISO 9001 certified manufacturer of various springs that was established in 1917. Based in Philadelphia, Pennsylvania, the company produces custom and standard springs including compression, extension, torsion, and military specification (MILSPEC) models. They also offer limited metal fabrication capabilities such as stamping, machining, and turning for related small assemblies. MRS primarily serves clients in the aerospace, general manufacturing, transportation, and energy sectors. They maintain a network of sales offices and partner distributors across the United States, Canada, and Mexico.
ASRaymond, founded in 1883, is a manufacturer and supplier of springs, metal components, functional assemblies, and hardware solutions. The springs comprise compression, lock-in-place, traction, and reducible force springs with spring washers and speed reducers. Mounting hardware includes ball studs, mounting brackets, end-fittings, and accessories utilized in the construction, aerospace, lift equipment, medical, and military industries. The Ste. A Maumee, Ohio-based company is ISO and TS certified and provides application engineering services, distribution and packaging, finishing and coating, warehousing, and customisation choices.
All Jetting Technologies Inc., in South Florida, is a family-owned company that provides affordable and quality products. The company manufactures rotating waterjet guidelines, water blast nozzles, and high-pressure and ultra-high-pressure water jetting hose fittings. It also specialize in UHP Hydro Blast surface preparations, fittings, adapters, and parts for industrial work environments in the hydro jetting industry. All Jetting Technologies, Inc. is also a distributor for Parker Hannifin's high-pressure hydroblaster , Blaster hoses, Ultra High Blaster Hoses, and Ultra High Pressure Hydroblasting Hoses
Kehr-Buffalo Wire Frame is a private enterprise established in 1953, with its headquarters situated in Buffalo, New York, and holds a good position in the business as a maker of springs, wire forms, and point-of-purchase (POP) displays. Kehr-Bufallo Wire Frame currently engages in the production of wire forms, springs, and point-of-purchase displays. The company offers its clientele sophisticated functionalities about lean production and adherence to ISO standards. The organization employs a highly skilled workforce that consistently demonstrates efficiency and adaptability in meeting consumer demands.
Rabourdin SAS, established in 1926 and headquartered in Centre, France, is a distributor that specializes in the fields of mold, cutting, stamping, and special screws. The company offers a variety of products, including shoulder bolts, ejector pins, and accessories for molds. It also offers sprue bushings with dowel pin fixing, which are mechanical parts used in injection molding. Its product enhanced surface hardness to improve wear and corrosion resistance through tenifer nitriding. It serves a diverse range of industries, including mold and die, machinery, fastening, lifting, and more.
Springs & Things Inc., established in 1997 and located in Mississauga, Ontario, is a Canadian supplier specializing in custom springs and wire forms. The company offers a selection of custom springs, including coiled, compression, extension, flat, and torsion springs. These springs can be made from round wire or music wire, a type of high-carbon steel. Nylon, plastisol, polyvinyl chloride (PVC), and vinyl dip and spray, as well as wax after plating, can also be applied to improve performance, fulfill aesthetic requirements, and protect against corrosion. Additionally, the company provides a range of wire forms available in various types, shapes, and dimensions.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Fennell Spring Company |
2.5%
|
| 2 | YuDiing Enterprise Co., Ltd. |
1.9%
|
| 3 | Hennig Inc. |
1.9%
|
| 4 | Lee Spring Co. |
1.9%
|
| 5 | Kelco Industries |
1.9%
|
| 6 | Spring Manufacturing Corporation |
1.9%
|
| 7 | Springs Group s.r.l. |
1.6%
|
| 8 | RESORTES GALICIA |
1.6%
|
| 9 | Lesjofors Springs America, Inc. |
1.6%
|
| 10 | SPRINGS & THINGS INC. |
1.6%
|
Derivation Method
The ranking is calculated based on the click share within the compression spring page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
60 | 69.0% |
|
Japan
|
5 | 5.7% |
|
Spain
|
4 | 4.6% |
|
China
|
3 | 3.4% |
|
Italy
|
3 | 3.4% |
|
Germany
|
3 | 3.4% |
|
Taiwan
|
2 | 2.3% |
|
France
|
2 | 2.3% |
|
Canada
|
2 | 2.3% |
|
Switzerland
|
1 | 1.1% |
|
United Kingdom
|
1 | 1.1% |
|
Belgium
|
1 | 1.1% |
132 products found
132 products
Toei Spring Co., Ltd.
590+ people viewing
Last viewed: 4 hours ago
Fast Response
It can be processed from an ultra -thin line of φ0.030mm to φ0.030mm. Special shapes and plate -shaped ingredients such as oval and polygons can be...
6 models listed
Komura Sangyo
390+ people viewing
Standard Response
It is also called a compressed spring, is most commonly used, has a wide range of use, and has a variety of springs. It can adapt to any usage envi...
Komatsuzaki Co., Ltd.
820+ people viewing
Last viewed: 7 hours ago
Standard Response
■ Characteristics ・ Because the specific gravity is light, it is suitable for lighter weight. ・ It has excellent corrosion resistance, but the sp...
10 models listed
Showa Hatsujo Manufacturing Co., Ltd.
60+ people viewing
Last viewed: 1 day ago
Standard Response
■Sun-S spring With a rich lineup of 919 types of compression springs, 424 types of tension springs, 104 types of one-size-fits-all tension springs,...
Shinsei Hatsujo Industries Co., Ltd.
50+ people viewing
Last viewed: 1 day ago
Standard Response
Leave the standard springs for push springs and tension springs to us. In addition to our track record of supplying products to mass retailers, we ...
Tokyo Hatsujo Manufacturing Co., Ltd.
70+ people viewing
Last viewed: 3 hours ago
Very Fast Response
Our company was the first in Japan to standardize springs using irregular cross-section materials. The standard created by this technology is the p...
Komatsuzaki Co., Ltd.
700+ people viewing
Last viewed: 10 hours ago
Standard Response
Super Spring (SuperSpring) is a standard spring that is designed to eliminate the troubles of design by selecting a spring with the required charac...
10 models listed
Tokyo Hatsujo Manufacturing Co., Ltd.
80+ people viewing
Last viewed: 8 hours ago
Very Fast Response
Our company was the first in Japan to standardize springs using irregular cross-section materials. The standard created by this technology is the p...
Komatsuzaki Co., Ltd.
420+ people viewing
Last viewed: 7 hours ago
Standard Response
Super Spring (SuperSpring) is a standard spring that is designed to eliminate the troubles of design by selecting a spring with the required charac...
10 models listed
Suzuki Spring Manufacturing Co., Ltd.
150+ people viewing
Last viewed: 10 hours ago
We can manufacture products with wire diameters from maximum φ6mm to minimum φ0.1mm. We flexibly respond to needs regarding spring diameter and len...
Accurate Co., Ltd.
110+ people viewing
Last viewed: 23 hours ago
■Summary Ultraspring series compression coil spring standard. A total of 967 types. ■Spring characteristics The UltraSpring compression coil sprin...
20+ people viewing
This is the most common "spring". Your image of a spring may be a compression coil spring. RIKEN HATSUJO INDUSTRIES has technology that other compa...
2 models listed
Tokyo Hatsujo Manufacturing Co., Ltd.
80+ people viewing
Last viewed: 6 hours ago
Very Fast Response
Our company was the first in Japan to standardize springs using irregular cross-section materials. The standard created by this technology is the p...
Komatsuzaki Co., Ltd.
480+ people viewing
Last viewed: 10 hours ago
Standard Response
Super Spring (SuperSpring) is a standard spring that is designed to eliminate the troubles of design by selecting a spring with the required charac...
10 models listed
Showa Hatsujo Manufacturing Co., Ltd.
80+ people viewing
Last viewed: 1 hour ago
Standard Response
■Sun-S spring With a rich lineup of 919 types of compression springs, 424 types of tension springs, 104 types of one-size-fits-all tension springs,...
20+ people viewing
Last viewed: 18 hours ago
Conical coil springs are an effective option when there is not enough space for cylindrical compression coil springs. At Riken Hatsujo Kogyo, we co...
Tokyo Hatsujo Manufacturing Co., Ltd.
50+ people viewing
Last viewed: 1 day ago
Very Fast Response
Our company was the first in Japan to standardize springs using irregular cross-section materials. The standard created by this technology is the p...
Komatsuzaki Co., Ltd.
470+ people viewing
Last viewed: 18 hours ago
Standard Response
Super Spring (SuperSpring) is a standard spring that is designed to eliminate the troubles of design by selecting a spring with the required charac...
10 models listed
Showa Hatsujo Manufacturing Co., Ltd.
60+ people viewing
Last viewed: 1 day ago
Standard Response
■Sun-S spring With a rich lineup of 919 types of compression springs, 424 types of tension springs, 104 types of one-size-fits-all tension springs,...
Tokyo Hatsujo Manufacturing Co., Ltd.
60+ people viewing
Last viewed: 1 day ago
Very Fast Response
Our company was the first in Japan to standardize springs using irregular cross-section materials. The standard created by this technology is the p...
Komatsuzaki Co., Ltd.
450+ people viewing
Last viewed: 7 hours ago
Standard Response
Super Spring (SuperSpring) is a standard spring that is designed to eliminate the troubles of design by selecting a spring with the required charac...
10 models listed
Tokyo Hatsujo Manufacturing Co., Ltd.
50+ people viewing
Last viewed: 12 hours ago
Very Fast Response
Although it has various uses, it has received high praise as a coil spring for plastic molds. The TU series has a deflection of 65% of the free len...
Komatsuzaki Co., Ltd.
730+ people viewing
Last viewed: 12 hours ago
Standard Response
Super Spring (SuperSpring) is a standard spring that is designed to eliminate the troubles of design by selecting a spring with the required charac...
10 models listed
Samini Co., Ltd.
60+ people viewing
Last viewed: 1 day ago
■Unit price by order quantity (yen) ・1-4:200 ・5-9:160 ・10-19:95 ・20-49:62 ・50-99:40 ・100-199:37 ・200-499:34 ・500-999:30 ・1,000～1,999：26 ...
Tokyo Hatsujo Manufacturing Co., Ltd.
60+ people viewing
Last viewed: 12 minutes ago
Very Fast Response
Although it has various uses, it has received high praise as a coil spring for plastic molds. This TR series has a deflection of 50% of the free le...
Samini Co., Ltd.
30+ people viewing
Last viewed: 1 hour ago
■Unit price by order quantity (yen) ・1-4: 5,200 ・5-9: 4,500 ・10-15: 4,000
Tokyo Hatsujo Manufacturing Co., Ltd.
40+ people viewing
Last viewed: 9 hours ago
Very Fast Response
Although it has various uses, it has received high praise as a coil spring for plastic molds. This TY series has a deflection of 50% of the free le...
