31 Carbide End Mill Manufacturers in 2024
This section provides an overview for carbide end mills as well as their applications and principles. Also, please take a look at the list of 31 carbide end mill manufacturers and their company rankings. Here are the top-ranked carbide end mill companies as of November, 2024: 1.Cole Carbide Industries, Inc., 2.KYOCERA SGS Precision Tools, 3.Mastercut Tool Corp..
Table of Contents
What Is a Carbide End Mill?
Carbide end mills are mainly used on milling machines and drilling machines. They are primarily used to cut hard materials or materials that are difficult to machine. One of the characteristics of cemented carbide is its extreme hardness.
Tungsten carbide is an alloy made by sintering hard metal carbide powder with iron-based metal powder. Various shapes of cutting edges are available, but two-flute and four-flute spiral shapes are commonly used.
Uses of Carbide End Mills
Carbide end mills have advantages and disadvantages that should be considered:
- Advantages: Compared to HSS, the extreme hardness of carbide end mills enables high-speed cutting, reducing machining time. Additionally, their inflexible and rigid nature prevents bending and shaft expansion, ensuring precise machining.
- Disadvantages: Carbide end mills are less resistant to strength loss than HSS, which can lead to blade surface defects, among other issues.
Principles of Carbide End Mills
Carbide end mills are used to cut materials that are difficult to machine. The "cemented carbide" in carbide end mills is an alloy made by sintering very hard metallic carbide powder with iron-based metal powder. It exhibits extreme hardness, with a longitudinal modulus of elasticity three times that of iron and an indentation hardness of approximately 90.
Carbide end mills are harder than HSS, the base material, allowing for high-speed cutting, and their inflexible and rigid nature makes them suitable for precision cutting. To use them correctly, it is essential to determine the appropriate machining process based on factors like the diameter and type of the carbide end mill and the material to be cut and machined.
Re-coating and polishing can extend the life of carbide end mills, making them a cost-effective choice despite the higher initial cost compared to HSS. Each piece may be more expensive, but the extended tool life results in lower overall costs.
Carbide End Mill Material
Carbide end mills are cutting tools requiring high hardness and durability. Therefore, the material of cemented carbide end mills is a cemented carbide alloy consisting of extremely hard tungsten carbide (WC) fine particles bonded with cobalt (Co), which is both flexible and hard.
In the manufacturing process, tungsten carbide and cobalt powders are uniformly mixed in a powder mixer, then pressed into the shape of an end mill using a molding die. After that, they are sintered at a high temperature of 1300℃ or higher and completed by hot hydrostatic pressing (HIP) to remove internal defects such as gaps between the powders.
To further enhance wear and heat resistance, hard film coatings like titanium nitride (TiN) and titanium carbide (TiCN) are applied, extending service life. After a certain period of use, the coating thickness decreases, affecting its performance.
Hardness of Carbide End Mills
The hardness of carbide end mills depends on the amount of tungsten carbide and the particle size. A larger amount of tungsten carbide and smaller particle size result in higher hardness but increased brittleness, increasing the risk of chipping and cracking.
Hardness ranges from 900 HV to 1850 HV on the Vickers hardness scale, significantly higher than the maximum value of hardened steel at approximately 860 HV. This wide range allows for hardness selection based on the workpiece properties. Additionally, coating affects not only surface hardness but also heat resistance and chip evacuation properties, necessitating comprehensive judgment based on the carbide end mill's inherent hardness.
List of 31 Carbide End Mill Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Canada
- China
- Japan
- Taiwan
-
-
-
Lift Products, Inc.
2 Flute
Manufacturer Overview
Lift Products, Inc., established in 1994, is an American manufacturer based in Waukesha, Wisconsin, specializing in ergonomic industrial equipment. The company presents a lineup of material handling solutions encompassing electric carts, lift tables, mobile lifts, and pallet trucks. Other product offerings include skid lifters, stackers, tilters, and tuggers. Hydraulic, rotating, and pneumatic work positioners are also available. It also provides custom industrial and material handling equipment, notably for electric carts, lift tables, and tilters. The company serves various industries, including oil and energy, food and pharmaceutical, as well as heavy equipment. Other industries served include logistics, manufacturing, metal working, retail, and woodworking.
-
-
-
-
-
KYOCERA SGS Precision Tools
End Mill
Manufacturer Overview
KYOCERA SGS Precision Tools, established in 1961 with headquarters in Munroe Falls, Ohio, USA, is a manufacturer of carbide rotary tooling. The company's product line includes a range of end mills, drill bits, routers, micro end mills, and micro drill bits. Its latest high-tech products include internal coolant drills and tapered circle segment barrel end mills. These products are used in CNC machining and drilling machines, machining centers, and lathes. The company serves various markets, including general machining, construction, automotive, aerospace, and carpentry.
-
-
-
-
-
Melin Tool
Carbide End Mill
Manufacturer Overview
Melin Tool Company, a company founded in 1940, based in Cleveland, Ohio, is a manufacturer and supplier of quality end mills and cutting tools. The company offers a range of products such as carbide drills, thread mills, countersinks, and custom tools. These products are designed for high performance applications in aerospace, medical, and mold and die fields. It also provides after-sales service and warranty for its products and it is ISO 9001-2008 certified and has a strong status in the US market.
-
-
-
-
-
CGS Tool
Carbide End Mill
Manufacturer Overview
CGS Tool, founded in 1974 and located in Medina, Ohio, United States, is a manufacturer of carbide end mills and cylindrical carbide cutting tools. It offers a wide range of products, including end mills, general-purpose end mills, cylindrical carbide cutting tools, refurbished end mills, and custom-designed profile carbide end mills, for clients in industries such as aerospace, medical, automotive, and manufacturing. The company also provides services such as tool building, troubleshooting, and material data safety sheets.
-
-
-
-
-
Guhring, Inc.
Carbide End Mill
Manufacturer Overview
Guhring, Inc. is an American manufacturer of round shank cutting tools established in 1978 as a subsidiary of German company Guhring KG, which was originally founded in 1898. Headquartered in Brookfield, Wisconsin, the company produces various taps, end mills, drills, and reamers, as well as tool holders and countersinks. These are utilized in the manufacturing and engineering processes of clients in the industrial sector, including tool and mold making, power generation, and construction. Guhring, Inc. owns over 1,000 patents, and produces more than 40,000 different cutting tools that it distributes via other subsidiaries in the Guhring KG network.
-
-
-
-
-
Mastercut Tool Corp.
Carbide End Mills
Manufacturer Overview
Mastercut Tool Corp. is a manufacturer of precision cutting tools that is based in Safety Harbor, Florida, USA and has been serving the sector since 1985. The company's main activities involve designing and producing a wide range of cutting tools. Its product offerings include performance end mills, CVD routing flyer, burs flyer, drills, and reamers, serving industries such as manufacturing, aerospace, and automotive. Mastercut Tool offers services like tool re-sharpening and customized tool solutions.
-
-
-
-
-
Grizzly Industrial(R), Inc.
Carbide End Mills
Manufacturer Overview
Grizzly Industrial Inc. was established in 1983 and has its headquarters in Bellingham, Washington, United States. The company is a major supplier of everything metal and woodworking machinery and accessories. Grizzly Industrial provides machinery and accessories direct to customers at great prices, and thus eliminate the system of middleman markups. The company has a vast distribution network across the United States and a 38,000 square feet showroom in Springfield Missouri.
-
-
-
-
-
Harvey Tool Company
Carbide End Mills
Manufacturer Overview
Founded in 1985, with headquarter in Rowley, Massachusetts, United States, Harvey Tool Company is a manufacturer and supplier of carbide end mills and cutting tools for the metalworking industry. The company offers Miniature End Mills, Material Specific End Mills, Tool Holders, and, Thread Mills. Besides these products, they also provide hole-making services that have applications in various industries related to metalworking. The company provides metric tooling options for Miniature End Mills, and offers new diameters, reaches, angles, and coatings of tools that are needed by the metalworking industry.
-
-
-
-
-
Haimer USA
Carbide End Mills
Manufacturer Overview
Haimer USA, founded in Villa Park, IL, in 2002 is a manufacturer of Tool Holder, Shrink-Fit Machines, 3 Dimensional Edge Finders and Solid Carbide Endmills. The company's product portfolio includes 3D-Sensors and centering devices, Grinding Wheel Adapters, measuring equipment, face shields and Accessories for tool holders. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company has a 24,000 square foot facility containing a showroom, offices and a full stocking warehouse
-
-
-
-
-
Cole Carbide Industries, Inc.
Carbide End Mills
Manufacturer Overview
Cole Carbide Induestries, Inc was founded in 1936 and has its headquarters in Michigan, United States. Cole Carbide is a manufacturer of close-tolerance carbide cutting tools, tool systems, and engineering services. The company is also the manufacturer of the Indexa-V custom self-locking/self-centering carbide drill systems designed with a patented "V" seat to assure axial thrust direction through the center of the tool holder and provide greater stability, size control, and precise cutting repeatability. The company has various Carbide Mold Tooling and Carbide Cutting Tools for profile and contour milling. Their customer base includes aluminum extrusion companies and medical component industries.
-
-
-
-
-
Suncoast Precision Tools
Carbide End Mill
Company Overview
Suncoast Precision Tools, Inc. established in 1963 and based in Largo, Florida, USA, is a manufacturer and distributor of good-quality cutting tools. The company's product range includes cutting tools, end mills, and products from Guhring Tool Co, Harvey Tool, and Mitee-Bite. These tools are pivotal for applications in industries such as automotive, aerospace, electronics, and machinery manufacturing. It offers carbide end mills, tool holders, and abrasives. its services include a devoted customer support team, accessible via phone, ensuring clients get the assistance required promptly.
-
-
-
-
-
Shars Tool
Carbide End Mills
Company Overview
Shars Tool is an American wholesale distributor of industrial equipment and machinery that was established in 1978 in Saint Charles, Illinois. The company stocks various hand and power tools, abrasives, and cutting tools, as well as machinery like mills and lathes. They also offer material handling equipment like carts and bins, as well as safety accessories like goggles and gloves. Shars Tool chiefly serves client companies and businesses in the metalworking, DIY, home maintenance, and hobby markets, as well as select e-retailers such as LittleMachineShop.com.
-
-
-
-
-
Kennametal Inc.
Carbide End Mills
Company Overview
Kennametal, Inc. is an American manufacturer and distributor of engineering tools and materials that was established in 1938 in Pittsburgh, Pennsylvania. The company primarily produces mining and metalworking tools such as solid carbide cutters and indexable inserts. They also offer components as well as materials, including metal powders, drill bits, tungsten-based alloys, and carbide rods and blanks. These are commonly used in construction, transportation, and energy production, as well as in surface and underground mining operations. Kennametal, Inc. operates internationally with several subsidiaries of its own, including Sintec Keramik GmbH, Stellite Holdings Ltd, and Conforma Clad Inc.
-
-
-
-
-
Western States Hardware
Carbide End Mills
Company Overview
Western States Hardware was founded in La Puente, California in 1968. Western States Hardware serves customers across the United States, offering products in a number of categories including: nuts, screws, & bolts, metric nuts, screws, & bolts, drills & cutting tools, saw blades, electrical connectors, pipe nipples, & pipe fittings, industrial brushes, parker brass fittings & valves, anchors, abrasive pads, belts, & discs, chain & rigging accessories, various tools, valves, staple & nail guns, power & insert bits, and hoses, tubing, & clamps. Altogether, Western States Hardware offers over 750,000 products available.
-
-
-
-
-
Mitsubishi Materals U.S.A. Corporation
Carbide End Mills
Distributor Overview
Mitsubishi Materials U.S.A. Corporation, is subsidiary of Mitsubishi Material Corporation, founded in Japan, in 1868, and is a distributor of metal products used in various industries. The company's product portfolio includes Turning Tools, Rotating Tools, Gear Tools and Environmentally Friendly Products. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. They have global sales offices, distribution channels, R&D and a customer support center.
-
-
-
-
-
7-Leaders Corp.
Interchangeable Multi-purpose End Mill Cutter
Manufacturer Overview
7-Leaders Corp., established in 1990 and headquartered in Taiwan, is a manufacturer of tungsten carbide cutting tools such as end mills, drills, and reamers. The company's products include thread mills, interchangeable end mills heads, and shanks, catering to machinery parts, sports equipment, and medical industries. Its end mills are used for machining complex surfaces in molds and dies, while its drills are suitable for precise hole-making in machinery parts. Its production process uses Swiss-coating technology for grinding, honing, and polishing. The company provides customized services and new developments in the solid carbide-cutting tools industry.
-
-
-
-
-
SDK Tool (China) Co., Limited
Solid Carbide End Mill
Manufacturer Overview
SDK Tool Co. Limited., based in Changzhou, China, is a manufacturer of solid carbide cutting tools such as end mills, reamers, and solid carbide drill bits. The company produces tools suitable for materials such as carbon steel, cast iron, and copper, serving industries like manufacturing, military, and mold development. SDK Tool Co. Limited can also customize cutting tools to meet clients' needs, offering free laser engraving and buyer labeling. The company produces its tools using CNC grinding machines and exports them to over 100 countries, including Germany, the USA, and Thailand.
-
-
-
-
-
Wey Juan Technology Co., Ltd.
Carbide End Mill
Manufacturer Overview
Wey Juan Technology Co. Ltd, founded in 2000 in Taichung City, Taiwan is a manufacturer of carbide cutting tools, including square end mills, corner radius end mills, miniature end mills, roughing end mills, and related accessories for metalworking, aerospace, automotive, and industrial supply purposes. The company’s products are made from carbide ross sourced from Japan Sumi Tool and Germany KFC, and made through CNC machining. The company serves both local and international clients for high precision and machining processes.
-
-
-
-
-
Henan Heygo Tools Co., Ltd
Carbide End Mill
Manufacturer Overview
Henan Heygo Tools Co., Ltd, established in 2007, is a manufacturer and supplier of quality diamond tools based in China. The company specializes in the production of diamond saw blades, grinding wheels, and core drill bits for various applications. With a emphasis on precision and durability, Henan Heygo Tools aims to provide tools that enhance cutting, grinding, and drilling processes in industries like construction, stone processing, and metalworking. Their solutions cater to professionals seeking efficient and effective tools for demanding tasks.
-
-
-
-
-
UNION TOOL CO.
Carbide End Mills
Manufacturer Overview
UNION Tool Co., established in 1955 is a manufacturer and retailer of cutting tools, linear motion products, sensor products, and measuring instruments based in Tokyo, Japan. The company offers tungsten carbide-made cutting tools such as MDP drill pointer, OPTECH-M non-contact drill diameter, and ring setting machines. The company also has a rolling dies/ forging tools/ coating rods product segment which includes various products including screw manufacturing dies, rack dies, rolled products, and roll dies & incremental dies. Their products are used in PCB drill development, and machine tools & semiconductor manufacturing applications.
-
-
-
-
-
NACHI-FUJIKOSHI CORP.
Carbide End Mills
Manufacturer Overview
NACHI-FUJIKOSHI CORP. is a Japanese manufacturer of industrial machinery and tools, such as bearings, hydraulic equipment, robots, and cutting tools. They also provide services such as machine maintenance and repair. The company's products are used in automotive, aerospace, construction, and electronics. One of NACHI-FUJIKOSHI's renowned products is their robotic arm, the "MZR series," which is designed for precision assembly and inspection tasks in industries. They received several awards for their technological advancements and contributions to the industry, including the 2021 Japan Society of Mechanical Engineers Medal for new hydraulic equipment technology and the 2020 Nikkan Kogyo Shimbun Grand Technology Award.
-
-
-
-
-
OSG Corporation
CARBIDE END MILL
Manufacturer Overview
OSG Corporation., founded in 1938 and headquartered in Toyokawa, Japan, is a manufacturer of various cutting tools, including end mills, drills, taps, rolling dies, and gauges. The cutting tools are engineered for an array of industries, including energy, automotive, aerospace, die/mold, and heavy. The company also has an academy that it uses as an innovation hub for researching, designing, and developing new products. It established its first overseas subsidiary in the U.S. in 1968, and since then, it has continued to build a network of manufacturing, sales, and technical support locations spanning 33 countries.
-
-
-
-
-
Xiamen Betalent Carbide Co., Ltd
Carbide End Mill
Manufacturer Overview
Xiamen Betalent Carbide Co., Ltd., established in 2008 and based in Dongguan, Ganzhou with its head office and main plant in Xiamen, China, is a manufacturer and supplier of cemented carbide materials and carbide products. The company’s head office and main plant cover an area of 10000-meter square. Cemented carbide is used as cutting tool materials like turning tools, milling cutters, planers, drills, and boring cutters for cutting cast iron, non-ferrous metals, plastics, chemical fiber, and other difficult-to-cut materials. The company has achieved numerous accolades including SGS certification.
-
-
-
-
-
Fullerton Tool Company, Inc.
Carbide End Mills
Manufacturer Overview
Fullerton Tool Company, Inc., founded in 1942 with headquarters in the USA, is a manufacturer of solid carbide and cutting tools and equipment. The company's product line includes end mills, drill mills, saws, boring tools, and keyseat cutters. Fullerton Tool Company's tools are utilized for cutting various metals on heavy-duty machines, CNC lathes, engine lathes, and chuckers. The company's equipment is used in numerous industries, including the automotive, construction, general machining, furniture, and oil and gas markets, for cutting, reaming, grooving, and grinding of hard metals. Fullerton Tool Company offers custom tool design and production, as well as refurbishing services.
-
-
-
-
-
Sandvik Coromant
Carbide End Mills
Manufacturer Overview
Sandvik Coromant, founded in Sandviken, Sweden in 1942, is a manufacturer of tools for turning, milling, drilling and holding systems. The company's product portfolio includes, copy milling tools, groove milling tools, threading tools, solid milling tools and exchangeable tips. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company provides services such as Product Selection Guidance, Engineering Support, New Product Design and Development and Custom Manufacturing.
-
-
-
-
-
Proto-Cutter, Inc.
Carbide End Mills
Manufacturer Overview
Proto-cutter Inc. was established in 1991 and is based in Freeport, Illinois, as a manufacturer and supplier of precision cutting tools. Their product portfolio includes reamers, end mills, indexable drills, floating holders, port contour cutters, and custom precision tools. The company also provides reconditioning services to restore original sharpened design features for long-lasting efficiency of the cutting tools. The company provides cutting tool devices manufactured with the latest advanced technology for solving industrial problems.
-
-
-
-
-
Muraki co.,ltd.
Carbide Endmills
Company Overview
Muraki co.,ltd., founded in Osaka, Japan, in 1906 is a manufacturer and supplier of machinery parts and tools. The company's product portfolio includes Tool bits, Cutting tools, Industrial brushes, Measuring equipment and tools and diamond pastes. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company also provides services including national distribution, product selection, customized services, technical support and customer service.
-
-
-
-
-
Toolsavings, LLC
Carbide End Mills
Company Overview
Toolsavings, LLC is based in Chicago, Illinois and is a supplier and distributor of industrial supplies for both individual and corporate customers. Toolsavings offers an extensive catalog spanning over 10 categories such as Cutting Tools, Toolholding, Air and Power Tools, Fasteners, and Measuring Instruments from brands such as 3M and Destaco. Cutting tools include drills, reamers, and saws. Toolholding includes boring heads, retention knobs, and sawholders. Air and Power Tools includes blow guns, grinders, and tire gages. Fasteners includes screws and pins. Measuring instruments includes calipers, microscopes, and squares.
-
-
-
-
-
-
-
Kodiak Cutting ToolsSino-Inst
Carbide End Mills
-
-
-
-
-
Accusize Industrial Tools
Carbide End Mills
Distributor Overview
Accusize Industrial Tools was born in Toronto, Canada in 2008. Accusize is a distributor of measuring tools, cutting tools, and machine tools for metalworking companies. A portion of offerings that Accusize offers includes collet blocks, expanding arbors, air tools, power tools, die maker tools, annular cutters, bore gages, boring bars, boring heads, BT40 tooling, CAT40 tooling, calibration, layout, & machine setting tools, calipers & attachments, carbide inserts, end mills, force gauges, and metrology and material testing equipment.
-
-
Carbide End Mill Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Cole Carbide Industries, Inc. |
13.7%
|
| 2 | KYOCERA SGS Precision Tools |
6.3%
|
| 3 | Mastercut Tool Corp. |
5.3%
|
| 4 | Guhring, Inc. |
4.1%
|
| 5 | CGS Tool |
4.0%
|
| 6 | Melin Tool |
4.0%
|
| 7 | Harvey Tool Company |
3.8%
|
| 8 | Grizzly Industrial(R), Inc. |
3.8%
|
| 9 | Wey Juan Technology Co., Ltd. |
3.7%
|
| 10 | Kennametal Inc. |
3.7%
|
Derivation Method
The ranking is calculated based on the click share within the carbide end mill page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- OSG Corporation: 7,543
- NACHI-FUJIKOSHI CORP.: 7,205
- UNION TOOL CO.: 1,486
Newly Established Company
- YIDA Precision Tools Co., LTD: 2001 (23 years ago)
- Wey Juan Technology Co., Ltd.: 2000 (24 years ago)
- Proto-Cutter, Inc.: 1991 (33 years ago)
Company with a History
- Guhring, Inc.: 1898 (126 years ago)
- NACHI-FUJIKOSHI CORP.: 1928 (96 years ago)
- Cole Carbide Industries, Inc.: 1936 (88 years ago)
Carbide End Mill Manufacturers in United States
*Including some distributors, etc.
- Lift Products, Inc.
- KYOCERA SGS Precision Tools
- Melin Tool
- CGS Tool
- Guhring, Inc.
- Mastercut Tool Corp.
- Grizzly Industrial(R), Inc.
- Harvey Tool Company
- Haimer USA
- Cole Carbide Industries, Inc.
- Suncoast Precision Tools
- Shars Tool
- Kennametal Inc.
- Western States Hardware
- Mitsubishi Materals U.S.A. Corporation
Global Distribution of Carbide End Mill Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
15 | 60.0% |
Japan
|
4 | 16.0% |
Taiwan
|
3 | 12.0% |
|
China
|
2 | 8.0% |
Canada
|
1 | 4.0% |
List of Carbide End Mill Products
204 products are listed.
Rinos Co., Ltd.
Carbide Ruffing End Mill Fine Pitch 30 ° Twist KT7027
130+ people viewing
Last viewed: 22 hours ago
■ Characteristics ・ Make Stag's unique fine pitch blade and high -performance alUNIT coat will show outstanding performance. ・ The surface roughn...
Banishing Tool Co., Ltd.
Carbide 2 blades cut kinui exhaustive exhaustive C wavy end mill Typhoon mill
40+ people viewing
Achieves specialists/burrless cuttings for improving productivity.
Banishing Tool Co., Ltd.
Carbide 4 -blade 4 -blade SUS C Web End Mill Silent Multi
30+ people viewing
The new coating has greatly improved heat resistance and wear resistance.
Rinos Co., Ltd.
Carbide rafing end mill 4 blades ALUNIT coating KT7697
130+ people viewing
■ Characteristics ・ Make Stag's unique 4 -blade -shaped and high -performance alUNIT coat will show outstanding performance. ・ The surface roughn...
Rinos Co., Ltd.
Nako End Mill 4 -Blade Carbide Square End Mill NACRO 040
50+ people viewing
■ Characteristics ・ It can be used for a wide range of materials, from difficult cutting materials such as high -hardware, titanium and stainless ...
Banishing Tool Co., Ltd.
3D processing Z -processed reinforced type C wavy end mill 3D end mill
40+ people viewing
■ Characteristics ・ Vertical / horizontal / slope freely, 3D processing in the new era. ・ Realize sharp 3D processing with new blade shape & new ...
Rinos Co., Ltd.
Dyna End Mill Super hard 6 Blade Regular Blade Long Shank Dyna060R
40+ people viewing
■ Characteristics ・ The side step processing of high -speed (~ 65HRC) is possible from high -speed side processing of general steel. ・ TIALCN (mu...
Rinos Co., Ltd.
4 -blade carbide end mill 4 -blade cut titanium cut KT7487
30+ people viewing
■ Characteristics ・ Pure titanium / titanium alloy ・ It is an end mill with radius for difficult cuttings up to 30 to 45 HRC. ・ It is for 30 ° s...
Banishing Tool Co., Ltd.
Carbide 4 -piece blade hard -cutting material specialized type C wavy end mill snake mill
80+ people viewing
■ Characteristics ・ Difficult shaving material specialized end milling alloy also runs smoothly. Achieves ultra -low anti -anti -anti -anti -anti ...
Banishing Tool Co., Ltd.
Carbide 3 Blade Aluminum Super high -speed construction C Wave End Mill Champfar Mill
40+ people viewing
High -speed processing is possible with a special blade type that does not produce a secondary bar at the time of milling.
Rinos Co., Ltd.
4 -piece blade failure / Inequal lead carbide end mill 4 -blade speed cut 35 ~ 38 ° short type KT8207
40+ people viewing
■ Characteristics ・ Speed -cut's unique inequality and Twindur coat achieves quiet and stable processing accuracy even in the ultra -high -speed...
Banishing Tool Co., Ltd.
High hardness and high efficiency processing C wavy end mill hard radius type
30+ people viewing
■ Specialist for improving productivity ・ With corner R. ・ HRC60 (baked steel) can be crispy. -There are extremely high film stiffness and heat r...
Rinos Co., Ltd.
Aluminum processing end millefine pitch 45 ° twist short type KT7087
40+ people viewing
■ Characteristics ・ The combination of 45 ° twist and high-performance AlUnit-S coat is powerful in rough processing on stainless steel and diffic...
Rinos Co., Ltd.
Dyna End Mill Super Hard 6 Blade Long Blade Dyna060L
40+ people viewing
■ Characteristics ・ The side step processing of high -speed (~ 65HRC) is possible from high -speed side processing of general steel. ・ TIALCN (mu...
Rinos Co., Ltd.
4 -piece blade failure / Inequal lead carbide end mill 4 -blade speed cut 39 ~ 42 ° Stainless steel / difficult cutting material processing KT7747
30+ people viewing
It is exclusively for stainless steel and difficult cutting materials of the speed cut series.
Rinos Co., Ltd.
Carbide Ruffing End Mill Fine Pitch 20 ° twist short type KT7047
40+ people viewing
■ Characteristics -Meike Stag's unique feature-knitting and high-performance Alunit-S coat will show outstanding performance. ・ The surface roughn...
Rinos Co., Ltd.
Dyna End Mill High Rigid Type Super hard Work 4 Blade Neck Short Blade Dyna060
40+ people viewing
■ Characteristics ・ The side step processing of high -speed (~ 65HRC) is possible from high -speed side processing of general steel. ・ TIALCN (mu...
Rinos Co., Ltd.
Carbide Rafing End Mill 3 Blade ALUNIT Coating KT7097
120+ people viewing
■ Characteristics ・ A well -balanced 3 -piece blade shape and alUNIT coat can be processed to a wide range of ingredients. ・ Especially suitable ...
Rinos Co., Ltd.
4 -blade carbide end mill 4 -blade titanium cut finish KT7607
40+ people viewing
It is for finishing 40 ° screw finishing.
Rinos Co., Ltd.
Nako End Mill 3 Blade Carbide Square End Mill NACRO 030
40+ people viewing
■ Characteristics ・ It can be used for a wide range of materials, from difficult cutting materials such as high -hardware, titanium and stainless ...
Rinos Co., Ltd.
4 -piece blade failure / inequality carbide end mill 4 blade speed cut 39 ~ 42 ° Oil hole KT8557
130+ people viewing
Last viewed: 13 hours ago
■ Characteristics ・ Speed -cut's unique inequality and Ultradur coat achieves a quiet and stable processing accuracy even in the ultra -high -sp...
Banishing Tool Co., Ltd.
Carbon carbon carbon fiber C wavy end mill pineapple cutter
30+ people viewing
■ Characteristics ・ Promise a carbon fiber -specific knife super beautiful face. ・ Z process is OK with a special blade shape. ・ Heat and wear r...
Rinos Co., Ltd.
4 -piece blade failure / Inequal lead carbide end mill 4 -blade speed cut 35 ~ 38 ° short type KT7707
40+ people viewing
■ Characteristics ・ Dry cutting is possible by adopting a unique inequality and alunit-s coat, and a quiet and stable processing accuracy is reali...
Rinos Co., Ltd.
4 -piece blade failure / inequality carbide end mill 4 -blade speed cut 35 ~ 38 ° Regular type KT7717
40+ people viewing
It is a regular type of KT7707.
Banishing Tool Co., Ltd.
Carbide 2 -blade aluminum ultra -high -speed construction C Wave end mill Almir
30+ people viewing
Achieves aluminum processing only/ultra -high -speed mirror cutting.
Rinos Co., Ltd.
4 -piece blade failure / Inequal lead carbide end mill 4 blades Speed cut neck 35 ~ 38 ° Regular type KT7317
30+ people viewing
KT7717 is a type with neck.
Rinos Co., Ltd.
4 -piece blade failure / inequality carbide end mill 4 blade speed cut 35 ~ 38 ° Oil hole KT8507
40+ people viewing
■ Characteristics ・ Speed -cut's unique inequality and Twindur coat achieves quiet and stable processing accuracy even in the ultra -high -speed...
Rinos Co., Ltd.
4 -piece blade failure / inequality carbide end mill 4 blade speed with cut neck 35 ~ 38 ° Stub type KT7627
30+ people viewing
■ Characteristics ・ Speed-cut's unique inequality and Alunit-S coat achieves quiet and stable processing accuracy even in the ultra-high-speed pro...
Rinos Co., Ltd.
Nako End Mill 90 ° Carbide V Point NACRO 020v90
40+ people viewing
■ Characteristics ・ Ideal for titanium alloy and high -hardness material (~ 62 HRC) Centering processing, C -surface processing, internal removal ...
Rinos Co., Ltd.
Nako End Mill 60 ° Carbide V Point NACRO 020v60
40+ people viewing
■ Characteristics ・ It is ideal for processing such as titanium alloys and high -hardness materials (~ 62hrc) Various hard -shaped materials on pr...
