All Categories
This section provides an overview for mortar adhesion enhancers as well as their applications and principles. Also, please take a look at the list of 5 mortar adhesion enhancer manufacturers and their company rankings. Here are the top-ranked mortar adhesion enhancer companies as of December, 2024: 1.BONDALL, 2.Vura Bau-Chemie LLP, 3.Builden Industries Sdn Bhd.
Table of Contents
A mortar adhesion enhancer is an application agent that enhances the adhesion between the mortar and the construction surface to be bonded.
It can be used in conjunction with a quenching agent and is also known as an adhesion primer.
The bond strength of mortar adhesion enhancers is not proportional to the amount used, so it is important to use the proper dosage. When applied to the surface and allowed to dry before bonding cement or mortar, the adhesive bonds strongly to the coating, resulting in a high-strength repair.
Mortar adhesion enhancers are used as pre-treatment for repairing damaged blocks or concrete to strengthen the adhesion to the work surface. After the surface is cleaned of dirt before bonding to the repaired area, the mortar adhesion enhancer is applied to the entire surface with a brush or roller and allowed to dry completely.
In addition to application to the substrate, the adhesive can also be mixed with cement to strengthen the adhesion. In either case, the undiluted solution of mortar adhesion enhancer should be diluted to the appropriate concentration.
The main mortar adhesion enhancer is made from a special acrylic resin. When applied directly to old concrete construction surfaces with a brush, the liquid penetrates into the brittle layers for strong adhesion.
Adhesion can be improved by creating a new, finer surface. When applied to a highly water-absorbent surface, it forms a coating film to reduce water absorption on the surface. When applied in several layers on a highly water-absorbing surface, a highly effective result can be obtained.
Mortar adhesion enhancers generally include ethylene-vinyl acetate and acrylic resins.
Ethylene-vinyl acetate is also called ethylene-vinyl acetate, abbreviated as EVA. Vinyl acetate has adhesive strength and is a raw material used in woodworking bonds. Mixed with ethylene as the main raw material, polyethylene has excellent flexibility, water resistance, and alkali resistance. It is an excellent mortar adhesion enhancer and is often used in plastering and mortar work.
Acrylic resins are mainly composed of methacrylic ester, acrylic ester, and styrene. Among synthetic resin emulsions, they have very high transparency and weather resistance. They can form a solid film even with common paints and are excellent at controlling pinholes. It can also be used as a primer and sealer for self-leveling materials such as cement and plaster.
A wide variety of material is used in the formulation of mortar, one of which is an adhesion enhancer. This is an application material that strengthens the adhesion between the mortar and the substrate, and is easily effective when applied directly to the construction surface by roller or brush. It is bonded to the substrate with a special acrylic resin that forms small bumps on the surface, which can be adhered by the mortar. In order to apply the mortar adhesion enhancer to the area to be mortared, it is necessary to brush off any dirt from the installation area beforehand.
Mortar admixture improves the glide of the trowel when applying mortar and provides a smooth finish. Mixing it into the mortar when making the mortar reduces cracking, and it also prevents cracking when applied thickly.
Colored powders can be easily mixed into mortar to create beautiful colors. Generally, even 1% of the amount of cement is sufficient to produce sufficient color, so care should be taken with the amount of mixture. A blending amount of 8% will produce the color of colored powder.
Mortar consists of three raw materials: fine aggregate, cement, and water. Sand used for fine aggregate is small grains with a diameter of 5 mm or less, which make the trowel finish smooth when the three raw materials are mixed. Cement is made by baking and grinding clay or limestone and is a grayish-white powdery material. It hardens when water is added and is utilized in all areas of construction sites.
The ratio of fine aggregate: cement: water should be 6:2:1 by weight. When using a small amount of mortar, it can be measured with a lightweight cup and the same ratio can be used. Mixing the mortar according to the formula will yield the same amount of mortar as sand.
*Including some distributors, etc.
Sort by Features
Sort by Area
Yoshino Gypsum Co., Ltd., founded in 1937 and headquartered in Chiyoda-ku, Tokyo, Japan, is a manufacturer and supplier of building materials made from gypsum. Its key product categories comprise gypsum board products, rock wool decorative sound-absorbing boards, painted wall materials or self-leveling floor materials, and more. Located in Sodegaura City, Chiba, the company also maintains a testing center for evaluating product functionality and safety, allowing quick responses to customer needs and continuous improvement in acoustics, fire resistance, resilience, and environmental adaptability. The company has earned ISO 9001 and ISO 9002 certifications for its quality management processes.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | BONDALL |
23.1%
|
| 2 | Vura Bau-Chemie LLP |
23.1%
|
| 3 | Builden Industries Sdn Bhd |
23.1%
|
| 4 | Weco |
15.4%
|
| 5 | YOSHINO GYPSUM CO.,LTD. |
15.4%
|
Derivation Method
The ranking is calculated based on the click share within the mortar adhesion enhancer page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
Japan
|
1 | 25.0% |
Australia
|
1 | 25.0% |
| Puerto Rico | 1 | 25.0% |
Malaysia
|
1 | 25.0% |
Chuo Sangyo Co., Ltd.
70+ people viewing
Last viewed: 16 hours ago
■Features ・Improvement point 1: By simplifying the shape, it is possible to increase the "degree of concrete filling" ・Improvement point 2: “Stre...
Chuo Sangyo Co., Ltd.
60+ people viewing
Last viewed: 16 hours ago
Building the future of reinforcing steel construction with speed and durability. Contributes to speeding up bottom plate reinforcement. 1/10~1/40 o...
Shin-Etsu Industry Co., Ltd.
110+ people viewing
Last viewed: 4 hours ago
■Summary Reprobond is a water-based acrylic/epoxy primer exclusively for Repromortar. It exhibits excellent performance on both wet and dry repair ...
TP Giken Co., Ltd.
30+ people viewing
Last viewed: 22 hours ago
■Summary Slump test (JIS A 1439-4-1)
Ishikura Shoten Co., Ltd.
250+ people viewing
■Features ・Preventing mortar from cracking ・Improve work efficiency ・The number of tsubos covered has increased by 20% ・Improved mortar fluidit...
Ishikura Shoten Co., Ltd.
160+ people viewing
■Features ・Promotes the effect of cement mortar ・Reduced time to finish pressing the trowel ・Since it is salt-free, there is no corrosion of rei...
Tokyo Fukuko Co., Ltd.
20+ people viewing
■Product overview Fukobelden is a completely inorganic cement admixture developed for the purpose of streamlining plastering, ready-mixed concrete,...
Tokyo Fukuko Co., Ltd.
20+ people viewing
Last viewed: 1 day ago
■Product overview It can be used to adjust the unevenness of various old bases, treat adhesive surfaces, and strengthen the adhesion of various fin...
