All Categories

History

  1. Metoree
  2. Machining / Machine Tools
  3. Gas Cutting Torches
Description 14 Manufacturers 75 Products
Uniweld Products, Inc.
SH Electronics Co
Portasol LTD.
PANCHAL PIPELINE EQUIPMENT
Misatu Industries
Migatronic A/S
Messer
Lincoln Electric
Harris Product
GEDIK WELDING
Galagar
ESAB

14 Gas Cutting Torch Manufacturers in 2024

This section provides an overview for gas cutting torches as well as their applications and principles. Also, please take a look at the list of 14 gas cutting torch manufacturers and their company rankings. Here are the top-ranked gas cutting torch companies as of December, 2024: 1.Uniweld Products, Inc., 2.GEDIK WELDING, 3.Messer.

Table of Contents

Categories Related to Gas Cutting Torches

Cutting Machinery
Plasma Cutting Machinery

What Are Gas Cutting Torches?

Gas Cutting Torches

Gas cutting torches use combustible gases such as acetylene gas and highly concentrated oxygen to oxidize steel plates for cutting.

Because of the flashes of light that occur during gas cutting, a certain amount of safety equipment such as goggles and masks is required, and because flammable gases are used, care must be taken when handling the equipment.

Uses of Gas Cutting Torches

Basically, only steel materials can be cut by gas cutting. Gas cutting machines are used to cut medium to thick steel plates, which take a long time to cut with grinders and other machines.

One of the disadvantages of gas cutting torches is that they are generally hand-held, so they are not very precise.

There are also NC gas cutting torches that can program the cutting position and automatically cut complex shapes.

Principles of Gas Cutting Torches

Gas cutting torches are equipped with hoses that connect to acetylene and oxygen cylinders, and each gas is supplied from the cylinder. The two supplied gases are discharged from the crater at the tip of the gas cutter, one as a mixture of acetylene gas and oxygen for the preheating flame, and one as an oxygen-only gas.

When the gas for the preheating flame is ignited with a special lighter and brought close to the steel, the preheating flame raises the temperature of the steel to 800 to 900 degrees Celsius. As mentioned earlier, high-concentration oxygen is ejected from the center of the preheating flame, so the high-pitched steel material burns and becomes liquid when oxygen is supplied, and is blown away by the high-pressure oxygen. As these reactions occur one after another, the steel plate is cut.

The main advantage of gas cutting torches is that they can cut thicker steel plates than laser cutting.

Another advantage is that gas cutting torches do not require electricity; all that is needed is a gas cutting torch and a gas cylinder, thus reducing the amount of equipment required and making the process more portable.

List of 14 Gas Cutting Torch Manufacturers

*Including some distributors, etc.

Sort by Features

  • Default
  • Company Size: largest first
  • Year Founded: oldest first
  • Year Founded: earliest first

Sort by Area

  • United States of America
  • Denmark
  • India
  • Ireland
    • Harris Product
      • United States of America Address: 4501 Quality Place Mason, Ohio, United States of America

      Manufacturer Overview

      Harris Product, established in 2006 and based in Ohio, United States, is a manufacturer of metalworking products such as brazing and soldering alloys and welding consumables. The company produces products such as brazing alloys, fabricated tubes, welding alloys and fluxes, and equipment for soldering, cutting, and welding for the gas distribution industries. The gas and welding equipment are manufactured in 11 manufacturing facilities across 6 countries – USA, Brazil, Mexico, Portugal, Italy, and Poland. The company has ISO 9001 quality management certification to manufacture the products by abiding by the quality standards.

    • Portasol LTD.
      • Ireland Address: Industrial Estate, O'Brien Road, Carlow, R93 K030, Ireland

      Manufacturer Overview

      Portasol LTD., established in 1984 and based in Carlow, Ireland, is a manufacturer of gas-powered soldering irons and heat tools. The company specializes in soldering kits, plastic welding, and gas torches. Its product range includes the super-Pro with the flameless hot blow, the Portasol-Patch for various repairs, and the Pz50 wood-burning pyrography kit. Its cordless soldering irons, known for ease of use and reliability, are preferred by professionals and DIY users. The company's plastic welding kit is popular in automotive repair and modeling industries.

    • PANCHAL PIPELINE EQUIPMENT
      • India Address: 325, Manjusar GIDC, Savli, Vadodara, Gujarat, India

      Manufacturer Overview

      PANCHAL PIPELINE EQUIPMENT, established in 2019 and based in Gujarat, India, is a manufacturer of pipe roller cradles and support. The company produces other products such as pipeline clamps, pneumatic clamps, external and internal pipe clamps, lifting belts, and pipe roller support and exports to Saudi Arabia, Nepal, Oman, Indonesia, and the USA. All its products are crack-resistant, have longer self-life, and go through testing on some pre-set parameters to meet the set quality standards.

    • Lincoln Electric

      Manufacturer Overview

      Lincoln Electric, established in 1895, is a supplier of cutting-edge products, welding processes, and automated solutions based in Cleveland, Ohio, United States. Lincoln Electric provides equipment, systems, and solutions for every segment of industry around the world. The company offers various products needed for welding and cutting, filler metals, weld fume control, and automation. Lincoln Electric's range of automation solutions includes Laser System Integration and Processing, Metalforming and Press Automation, and various automation needs of the Automotive industry.

    • Galagar

      Manufacturer Overview

      Galagar, started in 1945 and based in Zaragoza, Spain, is a manufacturer of welding solutions such as gas weld regulators, welding equipment, and torches. The company also sells protective equipment, including electronic screens for eye protection, fume extraction equipment, and curtains. Its Gasweld Dark helmet, which is EN 175 EN 379 CE certified, provides views in color and protects against UV and IR rays generated by arc welding and plasma cutting processes. The company also has a robotics division that manufactures welding processes and equipment for robotization and industrial automation and is responsible for the SynerBot line of products.

    • ESAB

      Manufacturer Overview

      ESAB, founded in 1904 and headquartered in Maryland, United States, is a manufacturer of welding as well as cutting equipment and consumables. It manufactures accessories and consumables, arc welding equipment, cutting automation, filler metals, and gas equipment. Moreover, it offers manual plasma cutting, PPE/Safety, robotics, torches, and welding automation. For arc welding, Fabricator EM 400i, for instance, is ideal for heavy industries due to the use of solid and flux-cored wires together with fabricator feed. ESAB has earned ISO 9001, ISO 14001, and the Occupational Health and Safety Advisory Services 18001 certifications.

    • Migatronic A/S

      • Migatronic A/S
        Torches

      • Denmark Address: Aggersundvej 33 Fjerritslev, North Denmark, Denmark

      Company Overview

      Migatronic A/S is a Danish manufacturer of welding machines and equipment that is headquartered in Fjerritslev, Denmark, and was established in 1974. The company's core expertise lies in designing and producing a diverse range of welding machines and accessories, including MIG welders, TIG welders, plasma cutters, and robotic welding systems. Migatronic also offers other welding consumables, such as welding rods, wire, and gas. Migatronic offers services such as customization warranties, automation and machine refurbishment. The company's customers include various welding processes and industries, including manufacturers, distributors, automotive, industrial, and shipbuilding.

      • India Address: No. 51- B, Srinivasa Street, Velachery Main Road, Balaiya Garden, Madipakkam, Chennai, Tamil Nadu, India

      Company Overview

      M/s. Lakshmi Machines, established in 2004 and based in Chennai, Tamil Nadu, India, is a manufacturer and supplier of Welding and Cutting Machines. The company's product range includes Air Plasma Cutting Machines, CNC Profile Cutting Machines, Laser Cutting Machines, Automated Plasma Cutting Systems, and Air Plasma Consumables Thermal Dynamic Hypertherm Kjellberg. These products serve industries like construction, automotive, and aerospace, which require precise welding and cutting equipment. Additionally, the company offers maintenance and repair services for its range of machines.

Gas Cutting Torch Manufacturer Ranking

*Including some distributors, etc.

Derivation Method

The ranking is calculated based on the click share within the gas cutting torch page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.

Number of Employees

  1. Messer: 2,798

Newly Established Company

  1. PANCHAL PIPELINE EQUIPMENT: 2019 (5 years ago)
  2. SH Electronics Co: 2008 (16 years ago)
  3. Messer: 2008 (16 years ago)

Company with a History

  1. Lincoln Electric: 1895 (129 years ago)
  2. ESAB: 1904 (120 years ago)
  3. Uniweld Products, Inc.: 1949 (75 years ago)

Gas Cutting Torch Manufacturers in United States

*Including some distributors, etc.

Global Distribution of Gas Cutting Torch Manufacturers by Country

*Including some distributors, etc.

Country Number of Companies Share (%)
India India 4 50.0%
United States of America United States of America 2 25.0%
Ireland Ireland 1 12.5%
Denmark Denmark 1 12.5%

Get bulk quotes from Gas Cutting Torches companies!

No Phone Number Required

No worry about receiving multiple sales calls

Get Bulk Quotes & Inquiries

No need to fill out the same information multiple times

List of Gas Cutting Torch Products

75 products found

75 products

High -performance CNC cutting machine MASTER series-Is tail

Is tail

High -performance CNC cutting machine MASTER series

590+ people viewing

Last viewed: 9 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

PROARC's Master series is a reliable and reliable gate -type cutting machine. It is a stable and excellent cost performance that matches all the cu...


High -performance CNC cutting machine ATHLETE series-Is tail

Is tail

High -performance CNC cutting machine ATHLETE series

360+ people viewing

Last viewed: 9 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

Proarc's Athlete series is a table type high -precision plasma cutting machine. The drive device uses a precision gear reducer that offers a loan r...

3 models listed

Athlete15-High -performance CNC cutting machine ATHLETE series
Athlete20-High -performance CNC cutting machine ATHLETE series
Athlete25-High -performance CNC cutting machine ATHLETE series

Cutting cnc plasma pipe cutting machine for any shape branch tube-Etron System Co., Ltd.

Etron System Co., Ltd.

Cutting cnc plasma pipe cutting machine for any shape branch tube

420+ people viewing

Last viewed: 13 hours ago

Standard Response

Response Rate
100.0 %
Response Time
17.1 hours

■ One -touch plasma cutting ・ In order to process the supervisor (mother), the cut panel cut parameter can be set in about 15 seconds without teac...

9 models listed

A1: PC-G25 ~ 150 / N300-ST600-Cutting cnc plasma pipe cutting machine for any shape branch tube
A2: PC-G25 ~ 250 / N350-ST600-Cutting cnc plasma pipe cutting machine for any shape branch tube
A3: PC-G25 ~ 350-ST600-Cutting cnc plasma pipe cutting machine for any shape branch tube
B1: PC-G25 ~ 250 / N350-ST2000-Cutting cnc plasma pipe cutting machine for any shape branch tube
B2: PC-G40 ~ 350 / N500-ST2000-Cutting cnc plasma pipe cutting machine for any shape branch tube
B3: PC-G40 ~ 5,000-ST2000-Cutting cnc plasma pipe cutting machine for any shape branch tube

Low-pressure blowpipe with a structure that reduces flashback Medium-sized cutter Z Novak / No. A cutter Z Novak-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Low-pressure blowpipe with a structure that reduces flashback Medium-sized cutter Z Novak / No. A cutter Z Novak

160+ people viewing

Last viewed: 1 day ago

Response Rate
100.0 %
Response Time
52.9 hours

■Features - Adopts a structure that reduces backfire, reducing accidents caused by backfire. ・A medium-sized cutter U45II Novak with a total lengt...

4 models listed

101Z-Low-pressure blowpipe with a structure that reduces flashback Medium-sized cutter Z Novak / No. A cutter Z Novak
501Z-Low-pressure blowpipe with a structure that reduces flashback Medium-sized cutter Z Novak / No. A cutter Z Novak
101Z-Low-pressure blowpipe with a structure that reduces flashback Medium-sized cutter Z Novak / No. A cutter Z Novak
512Z-Low-pressure blowpipe with a structure that reduces flashback Medium-sized cutter Z Novak / No. A cutter Z Novak

A wide range of cutting options from thin plates to thick plates Small cutter K/B cutter Z/C cutter S-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

A wide range of cutting options from thin plates to thick plates Small cutter K/B cutter Z/C cutter S

230+ people viewing

Last viewed: 29 minutes ago

Response Rate
100.0 %
Response Time
52.9 hours

■Features ・We have a wide range of cutting ranges from small cutters to C type cutter S. ・Novac function is not adopted for the 3 models.

5 models listed

111K-A wide range of cutting options from thin plates to thick plates Small cutter K/B cutter Z/C cutter S
113Z-A wide range of cutting options from thin plates to thick plates Small cutter K/B cutter Z/C cutter S
513Z-A wide range of cutting options from thin plates to thick plates Small cutter K/B cutter Z/C cutter S
114S-A wide range of cutting options from thin plates to thick plates Small cutter K/B cutter Z/C cutter S
514S-A wide range of cutting options from thin plates to thick plates Small cutter K/B cutter Z/C cutter S

Safe and powerful medium-pressure blowpipe that uses a tinder mixing method HC-391Z cutter/HC-338S cutter-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Safe and powerful medium-pressure blowpipe that uses a tinder mixing method HC-391Z cutter/HC-338S cutter

80+ people viewing

Last viewed: 7 hours ago

Response Rate
100.0 %
Response Time
52.9 hours

■Features ・Adopts a tinder mixing method to reduce accidents caused by backfire. ・It can be used with a general three-stage tinder, so you can sh...

2 models listed

391Z-Safe and powerful medium-pressure blowpipe that uses a tinder mixing method HC-391Z cutter/HC-338S cutter
338S-Safe and powerful medium-pressure blowpipe that uses a tinder mixing method HC-391Z cutter/HC-338S cutter

Portable CNC cutting machine CRUISER mini-Is tail

Is tail

Portable CNC cutting machine CRUISER mini

310+ people viewing

Last viewed: 9 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

High -precision and high -performance portable CNC cutting machine even if small Steel -made rails and strong housing are improved and new! It can...


Gouging blowpipe Z for machining widths of 5 to 17 mm and depths of 3 to 12 mm (approximate groove dimensions)-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Gouging blowpipe Z for machining widths of 5 to 17 mm and depths of 3 to 12 mm (approximate groove dimensions)

110+ people viewing

Last viewed: 1 day ago

Response Rate
100.0 %
Response Time
52.9 hours

■Gouging (grooving) A trench digging method in which the required areas are heated with a preheated flame of oxygen and acetylene (propane) and oxy...

2 models listed

115Z-Gouging blowpipe Z for machining widths of 5 to 17 mm and depths of 3 to 12 mm (approximate groove dimensions)
515Z-Gouging blowpipe Z for machining widths of 5 to 17 mm and depths of 3 to 12 mm (approximate groove dimensions)

Cutting machine special package-Is tail

Is tail

Cutting machine special package

380+ people viewing

Last viewed: 9 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

We propose a robot cutting system that maximizes productivity by combining each company robot and Hypertherm plasma cutting machine. The plasma can...

4 models listed

YASUKAWA MOTOMAN GT-12-Cutting machine special package
YASUKAWA MOTOMAN GT-25-Cutting machine special package
Special package 1-Cutting machine special package
Special package 2-Cutting machine special package

Mighty-C65 scarfing blowpipe-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Mighty-C65 scarfing blowpipe

90+ people viewing

Last viewed: 7 hours ago

Response Rate
100.0 %
Response Time
52.9 hours

Scarf dimensions: For processing groove width 23~40mm and groove depth 1~2mm. *Main use is for deburring sprues, etc. ■Scarfing (melting) In order...


Air prize cutting machine PowerMAX30-Is tail

Is tail

Air prize cutting machine PowerMAX30

330+ people viewing

Last viewed: 9 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

HYPERTHERM Air Prasma Cutter PowerMAX Series It is a plasma cutting machine that can be used outdoors. There are options for machine systems that c...

2 models listed

PowerMAX30 XP-Air prize cutting machine PowerMAX30
PowerMAX30 Air-Air prize cutting machine PowerMAX30

Mighty 1000E scarfing blowpipe-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Mighty 1000E scarfing blowpipe

90+ people viewing

Last viewed: 15 hours ago

Response Rate
100.0 %
Response Time
52.9 hours

For machining width 80~110mm and depth 2~3mm (shallow machining) and 4~5mm (deep machining). *Main use is for removing scratches from slabs, etc. ...


Air prize cutting machine PowerMAX45-Is tail

Is tail

Air prize cutting machine PowerMAX45

300+ people viewing

Last viewed: 9 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

HYPERTHERM Air Prasma Cutter PowerMAX Series It is a plasma cutting machine that can be used outdoors. There are options for machine systems that c...


Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for welding around 10mm from thin plates-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for welding around 10mm from thin plates

490+ people viewing

Last viewed: 9 hours ago

Response Rate
100.0 %
Response Time
52.9 hours

■Features - Lightweight and easy-to-use welded blowpipe. ・You can select your favorite type of small welder from NZ and MZ (grip increases by 5 de...

5 models listed

161MS-Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for welding around 10mm from thin plates
162NZ-Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for welding around 10mm from thin plates
162MZ-Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for welding around 10mm from thin plates
163P-Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for welding around 10mm from thin plates
163K-Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for welding around 10mm from thin plates

Air prize cutting machine PowerMAX65-Is tail

Is tail

Air prize cutting machine PowerMAX65

300+ people viewing

Last viewed: 8 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

HYPERTHERM Air Prasma Cutter PowerMAX Series It is a plasma cutting machine that can be used outdoors. There are options for machine systems that c...


Blowpipe mixed type (French style/Kansai style) No. 1 welder/No. 2 welder (Blowpipe mixed type) ideal for welding from 5mm to 45mm-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Blowpipe mixed type (French style/Kansai style) No. 1 welder/No. 2 welder (Blowpipe mixed type) ideal for welding from 5mm to 45mm

130+ people viewing

Last viewed: 21 hours ago

Response Rate
100.0 %
Response Time
52.9 hours

■Features - Lightweight and easy-to-use welded blowpipe. *The blowpipe does not come with a tinder.

2 models listed

167Z-Blowpipe mixed type (French style/Kansai style) No. 1 welder/No. 2 welder (Blowpipe mixed type) ideal for welding from 5mm to 45mm
168Z-Blowpipe mixed type (French style/Kansai style) No. 1 welder/No. 2 welder (Blowpipe mixed type) ideal for welding from 5mm to 45mm

Air prize cutting machine PowerMAX85-Is tail

Is tail

Air prize cutting machine PowerMAX85

370+ people viewing

Last viewed: 9 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

HYPERTHERM Air Prasma Cutter PowerMAX Series It is a plasma cutting machine that can be used outdoors. There are options for machine systems that c...


Crater mixing type (German style) No. A welder S/B welder S/No. 3 welder S (crater combination type) ideal for welding and heating from thin plates to 50 mm-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Crater mixing type (German style) No. A welder S/B welder S/No. 3 welder S (crater combination type) ideal for welding and heating from thin plates to 50 mm

160+ people viewing

Last viewed: 8 hours ago

Response Rate
100.0 %
Response Time
52.9 hours

■Features -Since it is mixed at the tinder, any fuel gas can be used by replacing only the tinder. ・Only the tip of the crater, which is severely ...

3 models listed

184S-Crater mixing type (German style) No. A welder S/B welder S/No. 3 welder S (crater combination type) ideal for welding and heating from thin plates to 50 mm
185S-Crater mixing type (German style) No. A welder S/B welder S/No. 3 welder S (crater combination type) ideal for welding and heating from thin plates to 50 mm
166S-Crater mixing type (German style) No. A welder S/B welder S/No. 3 welder S (crater combination type) ideal for welding and heating from thin plates to 50 mm

Air prize cutting machine PowerMAX125-Is tail

Is tail

Air prize cutting machine PowerMAX125

280+ people viewing

Last viewed: 9 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

HYPERTHERM Air Prasma Cutter PowerMAX Series It is a plasma cutting machine that can be used outdoors. There are options for machine systems that c...


High -precision composite gasplasma cutting machine XPR series-Is tail

Is tail

High -precision composite gasplasma cutting machine XPR series

310+ people viewing

Last viewed: 9 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

"XPR" is a plasma cutting machine that enables maximum productivity at the minimum cost. In addition, the operability is high, and it is possible t...

2 models listed

XPR170-High -precision composite gasplasma cutting machine XPR series
XPR300-High -precision composite gasplasma cutting machine XPR series

High -precision composite gas plasma cutting machine HPR400XD-Is tail

Is tail

High -precision composite gas plasma cutting machine HPR400XD

430+ people viewing

Last viewed: 9 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

"HPR" cuts the precision product with the highest quality and stability of the Hyperformance plasma, significantly reducing secondary work costs. T...


High -precision composite gas plasma cutting machine HPR800XD-Is tail

Is tail

High -precision composite gas plasma cutting machine HPR800XD

410+ people viewing

Last viewed: 9 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

"HPR" cuts the precision product with the highest quality and stability of the Hyperformance plasma, significantly reducing secondary work costs. T...

4 models listed

HPR800XD-High -precision composite gas plasma cutting machine HPR800XD
MP0020-26-High -precision composite gas plasma cutting machine HPR800XD
MP0020-26 Set configuration 1-High -precision composite gas plasma cutting machine HPR800XD
MP0020-26 Set configuration 2-High -precision composite gas plasma cutting machine HPR800XD

Oxygen plasma cutting machine MAXPRO200-Is tail

Is tail

Oxygen plasma cutting machine MAXPRO200

280+ people viewing

Last viewed: 9 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

"MAXPRO200" is an oxygen plasma cutting system created by the experience and technology that Hypertherm has cultivated so far. Oxygen, air, or air ...


Air prize cutting machine PowerMAX105-Is tail

Is tail

Air prize cutting machine PowerMAX105

410+ people viewing

Last viewed: 7 hours ago

Very Fast Response

Response Rate
100.0 %
Response Time
3.7 hours

HYPERTHERM Air Prasma Cutter PowerMAX Series It is a plasma cutting machine that can be used outdoors. There are options for machine systems that c...


Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for heating around 10mm from thin plate-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for heating around 10mm from thin plate

270+ people viewing

Last viewed: 5 hours ago

Response Rate
100.0 %
Response Time
52.9 hours

■Features - Lightweight and easy-to-use welded blowpipe. ・We offer a wide range of products to suit different applications. ・You can choose your ...

5 models listed

561VMS-Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for heating around 10mm from thin plate
562NZ-Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for heating around 10mm from thin plate
562Z-Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for heating around 10mm from thin plate
563P-Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for heating around 10mm from thin plate
563K-Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for heating around 10mm from thin plate

Automatic gas cutting machine Straight line cutting machine KT-5NX-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Automatic gas cutting machine Straight line cutting machine KT-5NX

180+ people viewing

Last viewed: 4 hours ago

Response Rate
100.0 %
Response Time
52.9 hours

■Product features ・Standard machine for straight cutting ・Speed ​​can be adjusted steplessly using the handle ・The wheels are placed on the outs...


Automatic gas cutting machine free cutting KT-160NII-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Automatic gas cutting machine free cutting KT-160NII

90+ people viewing

Last viewed: 15 hours ago

Response Rate
100.0 %
Response Time
52.9 hours

■Product features ・Multi-type that can not only cut straight lines but also cut free curves and arcs (Ø100 to 1,000 mm) ・Excellent heat resistanc...


Automatic gas cutting machine Straight line cutting machine KT-8XB-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Automatic gas cutting machine Straight line cutting machine KT-8XB

130+ people viewing

Last viewed: 5 hours ago

Response Rate
100.0 %
Response Time
52.9 hours

■Product features ・More robust than KT-5NX and ideal for harsh work environments ・Thick plate cutting specifications and powder cutting specifica...


Automatic gas cutting machine small circle cutting KT-30-6-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Automatic gas cutting machine small circle cutting KT-30-6

110+ people viewing

Last viewed: 4 hours ago

Response Rate
100.0 %
Response Time
52.9 hours

■Product features - Portable and compact small circle cutting machine ・Both drilling and cutting out discs are possible. ・Uses a clutch that swit...


Automatic gas cutting machine profile cutting KT-74M/KT-74L-NISSAN TANAKA CORPORATION

NISSAN TANAKA CORPORATION

Automatic gas cutting machine profile cutting KT-74M/KT-74L

100+ people viewing

Last viewed: 1 day ago

Response Rate
100.0 %
Response Time
52.9 hours

■Product features ・Ideal for cutting shapes of flat steel as well as punching holes in shaped steel and longitudinal materials. ・Lightweight and ...

2 models listed

KT-74M-Automatic gas cutting machine profile cutting KT-74M/KT-74L
KT-74L-Automatic gas cutting machine profile cutting KT-74M/KT-74L







Get bulk quotes from Gas Cutting Torches companies!

No Phone Number Required

No worry about receiving multiple sales calls

Get Bulk Quotes & Inquiries

No need to fill out the same information multiple times

Related Keywords

Files Desktop Cutting Machines Automatic Lathes Woodworking Machinery Pipe Grooving Machines Forgings Electrical Discharge Machining (EDM) Machinery General Purpose Milling Cutters Hydraulic Hole Punchers Coaters Potato Peelers Diamond Pastes Paper Folding Machines Filament Winders Taper Pin Reamers Sandblasters

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree