16 Descaler Manufacturers in 2024
This section provides an overview for descalers as well as their applications and principles. Also, please take a look at the list of 16 descaler manufacturers and their company rankings. Here are the top-ranked descaler companies as of November, 2024: 1.Chesterton, 2.Active Element, 3.Apex Engineering Products Corporation.
Table of Contents
What Is Descaler?
Descaler is used for the removal of scale, an inorganic salt compound such as calcium ions, magnesium ions, and silicon, contained in water that has adhered to vehicles and equipment. Scale is extremely hard and insoluble in water, making it difficult to remove once it adheres.
While there are methods to prevent scale formation in factories where water quality can be controlled, completely preventing rainwater-caused scale requires removing the wetted area before it dries out.
Uses of Descalers
Descalers are particularly necessary on the body of a car after it has been wet by rainwater. Avoiding scale formation entirely is nearly impossible, as it would mean not driving in the rain or removing 100% of the rainwater before it dries each time. Scale formation in water pipes can lead to health hazards and blockages. In factories, scale occurs in pipes, pumps, and boilers, impacting product quality, equipment efficiency, and boiler effectiveness.
Principle of Descaler
The primary method to remove scale involves reducing the pH of water below 10, thereby reducing scale generation. pH adjusters and oxygen scavengers can be used as descaling agents, but the latter can be hazardous to health. Instead, using a ceramic water reformer prevents scale formation; the reformed water makes it difficult for gases to vaporize, and calcium carbonate in scale compounds reacts with carbon dioxide in the water to become water-soluble calcium bicarbonate, which is easily detached.
In modified water, water molecules surround silicon, preventing gel film formation and thus silicon accumulation and scale adhesion. On the other hand, rainwater-caused scale, which does not change water quality, must be removed either physically or chemically. Physical removal involves using an abrasive sponge, which is effective but hard and can damage the paint and coating. Chemically, acidic chemicals can react with the scale for removal. This method is faster than abrasives and less stressful on coatings, but if used incorrectly, it can damage the car body and remove some types of paint and coatings.
List of 16 Descaler Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
-
-
-
Chesterton
346 Descaler
Manufacturer Overview
Chesterton, established in 1884 and headquartered in Groveland, Massachusetts, USA, is a manufacturer and supplier of industrial lubricants and MRO products. Its product range includes sealing solutions for both rotary and stationary equipment, fluid power equipment, industrial lubricants, and protective coatings designed to serve various industries, reducing costs and prolonging equipment life. The company holds various specifications and approvals for its industrial lubricants and MRO chemicals, including NSF Registration, Kosher, Halal, EU1935, BAM, and German Underground Mining Approvals.
-
-
-
-
-
Apex Engineering Products Corporation
Industrial Descaler
Manufacturer Overview
Apex Engineering Products Corporation in Aurora, IL, has been a manufacturer of safe and biodegradable specialty cleaning chemicals since 1941. These chemicals can dissolve tough mineral deposits such as lime scales, calcium, water scales, rust, and struvite. The company provides products such as coil cleaners, descalers & descaling systems, odor eliminators, water optimizers, and degreasers for heavy-duty and multi-purpose. These items are used in heat exchangers, cooling towers, condensers, chillers, and boilers. It has ISO 9001 and NSF/ANSI 60 certification.
-
-
-
-
-
Active Element
Descaler
Manufacturer Overview
Active Element is a manufacturer of chemical solutions established in 2013 and based in Kansas City, Missouri. It specializes in manufacturing products such as detergent concentrate, sanitizer concentrate, and rinse concentrate. It also manufactures commercial-grade dishwasher chemicals used for high-temperature and low-temperature machines. Its manufactured products serve restaurants, diners, hospitals, daycares, and food service businesses across the US. In manufacturing its products, the company complies with SARA regulations regarding chemical and hazardous materials.
-
-
-
-
-
SFA
Descaler
Manufacturer Overview
SFA, a manufacturer of bathroom fixtures, was established in 1958 and is based in Edison, New Jersey. Its products include macerators, self-contained units, water pumps, grinding systems, and toilet grinders. Its manufactured products are equipped with the above-floor technology. Its products are utilized for bathrooms, kitchens, laundry rooms, and residential and commercial sectors. Its product market covers several regions, such as India, the Middle East, Egypt, Greece, and Norway. The company obtained ISO 14001 certification and developed 27 subsidiaries across the UK, Australia, Italy, Germany, and Japan.
-
-
-
-
-
Goodway Technologies Corp.
Descaler
Manufacturer Overview
Goodway Technologies Corp., a manufacturer of maintenance equipment and supplies, was established in 1966 and based in Stamford, Connecticut. Its products include tube cleaning systems, industrial vacuums, cooling tower maintenance systems, dry steam sanitation solutions, and coil cleaning products. It also manufactures brushes such as brass, stainless steel, and nylon brushes, as well as manufactures floor machines like buffers and burnishers. Its manufactured products cater to several sectors, such as HVAC maintenance, plant machinery, material cleanup, and power generation. The company obtained the ISO 9001: 2000 certification.
-
-
-
-
-
Delta Products Group
Descalers
Manufacturer Overview
Delta Products Group, founded in 1996, is a US biodegradable liquid descaler product manufacturer located in Aurora Illinois. The company began as Apex and Delta Engineering in 1938 but was separated into Apex Engineering and Delta Products Group by the company’s two successors. Delta expanded overseas in 2003 to service Australia, Asia, and Europe. The company’s products include biodegradable liquid descalers, specialty cleaning, petro cleaning, and pump system solutions. The products are utilized in the medical, military, retail, manufacturing, and construction industries.
-
-
-
-
-
McNeil Industries
Descalers
Manufacturer Overview
McNeil Industries was founded in 1986 and is based in Painesville, Ohio. The ISO 9001-certified company is a manufacturer of seals, bearings, and other components for industries such as aerospace and firearms. The company’s three primary product lines are MAXM Bearings, Firearms, and Guide Systems. MAXAM Bearings are engineered to operate in harsh environments reaching 1000 degrees F, immersion in water, acids, and other corrosive environments. Firearms category includes weapons components such as guides, rails, barrels, sleeves, and safety locks. Guide Systems are designed with CAD software, and can be made from reverse-engineered products or developed as OEM products.
-
-
-
-
-
Vitex Corp.
Descalers
Manufacturer Overview
Established in 1970, Vitex is a manufacturer of building envelope solutions based in the USA. Specializing in producing weather-resistant barriers, roofing underlayment, and other construction materials. Their products enhance energy efficiency, moisture management, and overall durability in structures. Centered on innovation and customer satisfaction, Vitex provides sustainable solutions that add to building longevity. Their unique proposition combines advanced materials with expert engineering for optimal performance in various climates. With a history of delivering products, Vitex is a partner in the construction industry.
-
-
-
-
-
Chemtrol Industrial Compounds
Descalers
Manufacturer Overview
Chemtrol Industrial Compounds is a company based in Pennsylvania, United States, established in 1975, a manufacturer and supplier, they specialize in providing a diverse range of industrial compounds and chemical solutions. The company’s line of chemistry is expertly engineered and formulated for mass finishing applications. From vibratory finishing, cleaning, heat treatment, corrosion control, and facility maintenance, our chemistries are improved process parameters you can rely on. With a promise to modernization and quality, the company continues to serve global customers by delivering chemical solutions tailored to meet their specific needs and challenges.
-
-
-
-
-
Reed Manufacturing Co.
Descalers
Company Overview
Reed Manufacturing was founded in 1896 in Erie, Pennsylvania. Reed Manufacturing is a distributor of pipe tools and vises for professional trades. Product lines include cutters & cutter wheels, pipe cutters, large diameter pipe tools, plastic pipe tools, water services tools, threaders & dies, test pumps & groovers, vises, wrenches, and general pipe working tools. New product lines include cordless pipe bevelers, pipe beveler adapter heads, cordless power drives, cordless water transfer pumps, oiler systems, rachet wrenches, utility clutches, pipe end prep tools, and squeeze tools.
-
-
-
-
-
Metro Hydraulic
Descalers
Company Overview
Metro Hydraulic Jack Co. is a third-generation family run business in operation since 1941. MHJ is based in Newark, NJ. MHJ distributes hydraulic jack-related equipment, tools, and parts including a broad range of cylinders, motors, valves, presses, couplings, tools, hydraulic fittings, hoses, jacks, pumps, lifts, lubrication equipment, pallet stackers, scissor lifts, and workholding devices. MHJ also offers system design services as well as engineering services and extensive repair including testing, retrofitting, and overhauling.
-
-
-
-
-
Raytech Industries
Descalers
Company Overview
Raytech Industries was founded in 1958, and is a manufacturer of small mass-finishing equipment and accessories located in Stafford Springs, Connecticut, They joined forces with Lyman Products Corporation to enhance the manufacturing capabilities and product lines which are sold through specialized distributors around the world. Raytech's products include machines for casting, stamping, fabricating, and processing gemstones. Their products include vibratory tumblers, magnetic finishers, and rotary tumblers. Each machine is designed to deburr, finish, and burnish. They also offer a range of media and compounds to be used with their machines for different finishing applications.
-
-
-
-
-
Renfert
POWER steamer descaler
Manufacturer Overview
Renfert, founded in 1925 and headquartered in Hilzingen, Germany, is a manufacturer and supplier of dental products and technical materials. The company offers a range of dental solutions, including the STEAM tube, a smart steam cleaning station, as well as the MT premium model trimmer, and the POWER steamer. Its offerings are utilized to improve maintenance, reduce costs, and enhance the efficiency of dental technicians, dentists, and orthodontists in terms of the work process.
-
-
-
-
-
Gorilla Truck Box
Descaler
Manufacturer Overview
Gorilla Truck Box was established in 2015 and is based in Tulsa, Oklahoma, as a manufacturer of motor vehicles. Its manufactured products include gorilla truck box types G1, G2, and G3. It also manufactures plumber service trucks. Its products are built with carpet cleaners and professional restorer systems. Its manufactured products are utilized for several sectors across the US, including carpet cleaner, restoration contractor, electrical, and telecommunications. In manufacturing its products, the company adheres to the regulations and standards set by the US Federal.
-
-
-
-
-
Hibrett Puratex
Descalers
Manufacturer Overview
Hibrett Puratex, based in Pennsauken, New Jersey, is a distributor of commodity chemicals and a custom manufacturer of specialty chemicals. Its product portfolio comprises industrial commodity chemicals, industrial cleaning compounds, and wastewater treatment chemicals. The company serves the private labeling, auto detailing, and wastewater industries and also provides several chemical processing services, including compounding, blending, and packaging for industrial applications. The company has a temperature-controlled 20,000 sq ft warehouse and can make bulk deliveries of up to 1500 gallons. It complies with regulatory agencies like OSHA, DHS, and EPA and offers dry and liquid blending.
-
-
-
-
-
American Industries, Inc.
Descalers
-
-
Descaler Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Chesterton |
18.8%
|
| 2 | Active Element |
13.0%
|
| 3 | Apex Engineering Products Corporation |
13.0%
|
| 4 | Delta Products Group |
10.1%
|
| 5 | Renfert |
7.2%
|
| 6 | Chemtrol Industrial Compounds |
7.2%
|
| 7 | Goodway Technologies Corp. |
5.8%
|
| 8 | Vitex Corp. |
5.8%
|
| 9 | Reed Manufacturing Co. |
4.3%
|
| 10 | SFA |
2.9%
|
Derivation Method
The ranking is calculated based on the click share within the descaler page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- McNeil Industries: 30
Newly Established Company
- Gorilla Truck Box: 2000 (24 years ago)
- Delta Products Group: 1996 (28 years ago)
- Raytech Industries: 1958 (66 years ago)
Company with a History
- Raytech Industries: 1958 (66 years ago)
- Delta Products Group: 1996 (28 years ago)
- Gorilla Truck Box: 2000 (24 years ago)
Descaler Manufacturers in United States
*Including some distributors, etc.
- Chesterton
- Apex Engineering Products Corporation
- Active Element
- SFA
- Goodway Technologies Corp.
- Delta Products Group
- McNeil Industries
- Vitex Corp.
- Chemtrol Industrial Compounds
- Reed Manufacturing Co.
- Metro Hydraulic
- Raytech Industries
Global Distribution of Descaler Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
12 | 100.0% |
List of Descaler Products
13 products are listed.
Clean Chemical Co., Ltd.
SUN JOE, an acidic tablet containing disinfectant in organic acids
20+ people viewing
An acidic tablet containing disinfectant in organic acids. Calcium carbonate, which is caused by automatic priming by dialysis, can be removed and ...
Clean Chemical Co., Ltd.
New type of calcium carbonate removal that does not require neutralization
20+ people viewing
It is a neutral type calcium carbonate removal. It can be used as an alternative to acidic drugs. A new type of calcium carbonate removal that does...
Clean Chemical Co., Ltd.
Powdered maintenance processor scale removal cleaner surfac
20+ people viewing
This is a powdered maintenance agent that removes the scale attached to the wash chamber such as a washer disinfector or ultrasonic cleaner.
Clean Chemical Co., Ltd.
Optimal scale removal cleaner AC-50 for removing calcium attached to calcium that occurs in the cleaning device and inorganic scale scale
30+ people viewing
It is a cleaning agent suitable for removing calcium attached to the cleaning device and an inorganic scale scale. It can also be used as a neutral...
Clean Chemical Co., Ltd.
Calcium carbonate dissolving agent L-200 that is gentle on equipment components compared to acetic acid
20+ people viewing
It is a calcium carbonate dissolving agent that is friendly to device parts than acetic acid. Because it is an odorless type, the environment in th...
Clean Chemical Co., Ltd.
Plus the rustling effect on the conventional odorless type calcium dissolving agent plus
30+ people viewing
A highly cleaned liquid cleaner that adds a rust removal effect to the conventional odorless calcium carbonate dissolving agent.
Clean Chemical Co., Ltd.
Conventional odorless calcium carbonate dissolving agent plus a cleansing agent R-100 for personal dialysis.
20+ people viewing
A highly cleaned liquid cleaner that adds a rust removal effect to the conventional odorless calcium carbonate dissolving agent.
Clean Chemical Co., Ltd.
Modular rustling effect on an odorless calcium carbonate removal.
20+ people viewing
The deodonal carbonated calcium remover has been added to the removal effect. It can be used at a highly interpreted ratio and is economical.
