All Categories
This section provides an overview for powder coating as well as their applications and principles. Also, please take a look at the list of 77 powder coating manufacturers and their company rankings. Here are the top-ranked powder coating companies as of December, 2024: 1.Metal Coatings & Mfg. Co., 2.Little Swede Industries, 3.Matrix Coatings Corp..
Table of Contents
Powder coating is a process in which pigments, etc., are ground into a fine powder and sprayed directly onto a metal or other object and heated to form a coating film.
This coating method is called powder coating. The coating film is characterized by its strength, elasticity, and high corrosion resistance.
In contrast to solvent coating, in which pigments are generally dissolved in a solvent such as thinner and applied, powder coating does not use solvents. Therefore, the risk of environmental pollution, health hazard, fire, etc. is low.
Powder Coating is used for a wide variety of industrial products, including metal coatings.
Examples of specific applications are as follows:
There are two methods of spraying powdered paint to adhere to a coated object: electrostatic powder coating (spray coating) and fluidized dip coating (dip coating). In general, electrostatic powder coating using thermosetting paints is the most common method, so this section describes the electrostatic powder coating method.
In the electrostatic powder coating method, the paint is charged negatively (-) in atomized form and the object to be coated is charged positively (+), and the paint is sprayed onto the object to be coated electrically. The paint is charged to the negative electrode either by the corona method, in which voltage is applied to electrodes inside the spray gun that discharges the paint, or by the triboelectric method, in which static electricity is generated by the friction of the powdered paint as it passes inside the gun. The object to be coated is grounded and charged to the positive electrode.
After the coating is applied, it is heated at 180 to 200 degrees Celsius, which causes the powder to melt and undergo a chemical reaction, forming a coating film. The chemical reaction forms a network-like structure of high-molecular polymers, making the coated material less susceptible to air and providing excellent corrosion protection.
The work process of Powder Coating is as follows: pretreatment → draining and drying → powder coating → baking and drying → inspection.
Powder Coating is used because of its heat resistance, oil resistance, elasticity, and corrosion resistance, but in order for it to perform well, it is important that it adheres to and covers the coated object well. To improve adhesion, pretreatment and draining and drying before powder coating are important.
First, alkaline degreasing is performed to remove oil components from the coated surface, pickling to remove rust, and conversion treatment to produce a zinc phosphate film. The purpose of the conversion treatment is to remove impurities from the coated surface and to form a dense film with high rust-preventive properties.
After the conversion treatment, the coated surface becomes wet by rinsing, but if powder coating is performed with moisture remaining on the surface, blistering is likely to occur after the coating. Therefore, water should be completely removed before coating.
*Including some distributors, etc.
Sort by Features
Sort by Area
Axalta Coating Systems, established in 1866, is a manufacturer of performance and mobility coatings in liquid and powder form with corrosion resistance and durability. The powder coatings are used in pipelines, coastal & offshore, transportation, oil & gas, furniture, and wirework industries. The liquid coating includes waterborne and low-VOC coatings, high solids, and traditional solvent-borne coatings used by light OEM and commercial vehicle manufacturers and shop operators. The Glen Mills, Pennsylvania-based company also offers global weathering, testing, and consulting services with brand sport training centers.
Little Swede Industries established in 1977 serves as a manufacturer of custom surface treatment machinery and metal finishing/cleaning products and its manufacturing facility is based in Wichita, Kansas. The company's product line includes Washers, Shakers, and Blasters used in the aerospace, metal fabrication, and oil and gas industries and it offers a 12-month warranty for its products. It provides support from the product selection stage through the life-cycle of the machines and manufactures automated cleaning systems.
Nordson Corporation, established in 1954 and headquartered in Westlake, Ohio, USA, is a global manufacturer and marketer of differentiated products for precision dispensing and processing. They cater to diverse end markets, including packaging, electronics, medical, energy, and transportation. With over 6,800 employees across more than 35 countries, Nordson offers solutions for bonding, adhesive dispensing, fluid management, test and inspection, and UV curing. Their product line includes dispense tips, syringe barrels, dispensers, srapy valves, fluids, and syringe systems among others. Comprised of eight divisions, they are ISO 9001:2015 certified and provide systems, precision technology, and after market parts.
Metal Coatings & Mfg. Co., established in 1993, is a manufacturer specializing in metal fabrication and powder coating. The company has offered fabrication to meter covers, hydraulic pumps, steel cart frames, custom beverage carts used in transportation, architectural ornaments, HVAC, pressure washers, and bike racks. The company in Isanti, MN, offers services such as laser cutting, conventional machining, tube bending, and welding using aluminum, stainless steel, brass, copper, and steel. The company offers assembling and packaging of finished products.
Industrial Fabricators Incorporated, a manufacturer founded in 1964, offers precision metal fabrication from its 96,000 sq. ft. facility in Ohio, USA. Catering to diverse sectors such as telecommunications and computing, the company provide metal fabrication, precision welding, bus bar fabrication, and powder coating services. Its cutting-edge CNC machinery ensures quality products, including eye mount brackets, mounting stands, and copper bus bars. With ISO certification and Just-In-Time stocking, the company stands as a pioneer in precision metal fabrication
Plastisol Products, Inc., established in 1979, and located in Addison, Illinois, is a custom manufacturer and supplier of powder coating and wet painting services. The company's range of powder coating and wet painting services, includes electrostatic spray, conventional painting, chemical & abrasion resistance and EMI shielding requirements, serving market such as die cast, heavy duty truck parts, plastic, welding and muntin bar industries. It's services are used for efficient and even coating application, conventional painting for manual painting, and resistance coatings to protect surfaces from harsh environments and wear in various industries.
AP Precision Metals, Inc., established in 1986, and headquartered in San Diego, California, USA, stands as a manufacturer specializing in sheet metal fabrication. Its service portfolio encompasses sheet metal fabrication, powder coating, engineering, forming, and assembling, serving industries including robotics, medical devices, and aerospace. The company also provides additional services through precision grinding, trepanning, milling, thermal processing, and testing. The company holds ISO 9001:2015 certification for its quality management system.
Lafayette Wire Products, Inc., headquartered in Lafayette, Louisiana, is a manufacturer and supplier of wire products and components. They offer a diverse range of wire solutions, including wire baskets, wire forms, displays, guards, as well as grilles and shelving units, providing practical and efficient solutions for material handling, storage, protection, and merchandising needs. The company also offers in-house design and powder coating services for metal products of all kinds and has achieved certification under the NSF Food Equipment Standard 2 by the National Sanitation Foundation, registered since 2002.
Matrix Coatings Corp., founded in 1964 and headquartered in West Palm Beach, Florida, is an ISO 9001 and AS9100 registered manufacturer and supplier of core coating solutions. Their product range includes Teflon coatings, which offer corrosion protection, non-stick surfaces, and electrical insulation; Xylan coatings, designed for high-temperature applications in aerospace, industrial, and marine industries; and Halar coatings. Additionally, they offer powder coatings for metal parts, which are cured in an oven. One of their unique products is Mussel Buster, a marine biofouling-resistant coating, ensuring protection for marine components like propellers, rudders, and shafts against marine growth.
Pyramid Fab & Finish, founded in Saint Charles, Illinois, in 1972 is a manufacturer of precision sheet metal fabrication and powder coating services. The company's product portfolio includes Custom Fabricated Assembled Brick Oven, Sheet Metal Fabrication of an Aluminum Medical Control Box, Fabrication of a Barcode Printer Label Catcher, Custom Sheet Metal Fabrication of an Electronics Cabinet and Custom Fabrication of a NEMA Rated Cabinet Control Box. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building.
Dynamic Metal Innovations (DMI) was established in 2019 as a manufacturer company of industrial machinery, especially in metal fabrication and is based in Emmaus, Pennsylvania, United States. The company is capable on various services, such as laser cutting, bending, welding, deburring, powder coating, and assembly of metal-based products. The company also offers additiional services to support the core service, such as countersinking, heat treating, black oxide finishing, silk screening, and laser engraving.
Multimetal Products is a manufacturer of metal fabrications, machinery, and craftsmanship. It was founded in 1976 and located at USA. The company offer precision laser cut, water jet cut, sheet metal punch and form, and other services. They also specialized in excellent fabrications of stainless steel, aluminum, carbon steel and plastic. Multimetal Products creates parts accurately the first time around unbeatable lead times - a valuable combination to keep their customers satisfied.
DVUV, LLC was founded in 2005 and is a manufacturer and supplier company of custom powder coated components based in Cleveland, Ohio, United States. The company is specialized in UV-cured powder coating for wood, which under the brand of UVMax, UVMax Defender, UVMax Solid Surface, UVMax Metallics, and UVMax Gloss. The products have been used in industries such as retail, healthcare, hospitality, cabinetry, and office furniture. The company also has been certified by Sustainable Forestry Initiative (SFI) and meets CARB phase I and II requirements for their MDF wood.
Advanced Metal Components, Inc. (AMC) is a contract manufacturer of precision sheet metal founded in 1977 and currently headquartered in Swainsboro, Georgia. The company produces component components for a wide range of clients located in the eastern region of the United States. The company manufactures various features, including intricate weldments, NEMA-rated enclosures, motor mounts, and brackets. Outsourcing to the corporation enables customers to concentrate on their areas of competence. The company distinguishes itself from competitors through the utilization of in-house powder coating and assembly capabilities, as well as the delivery of warehousing services.
Moreng Metal Products Inc. founded in Totowa, NJ in 1902 is a manufacturer of precision sheet-metal for the fabrication industry. The company's product portfolio includes CNC milling and turning for secondary machining processes, Robotic welding for consistent and high-volume production, and painting, and plating for enhanced aesthetics and corrosion resistance. Their products are used in industries such as Electronics and Telecommunications, Automotive, Transportation and aerospace and Defense. They also offer custom packaging, warehousing, and distribution services.
Precision Engineering, Inc., established in 1988, and headquartered in Uxbridge, Massachusetts, is a custom manufacturer of sheet metal components and assemblies. The company offers a diverse range of custom sheet metal manufacturing services, including laser cutting, waterjet cutting, forming, welding, an more. It also provides value-added services such as design, prototyping, and quality assurance. Serving industries like aerospace, defense, and medical, the company specializes in producing sheet metal enclosures, components, and electro-mechanical assemblies. Its product portfolio consists of electronic systems, elevators, and escalator systems.
Motson Graphics, Inc. is an American AS9100D and ISO certified print manufacturer originally founded as the J. Frank Motson Company in 1928 in Philadelphia before eventually moving operations to Flourtown, Pennsylvania. Key functions they perform include: standard printing for screens, dials, gentape instruments and back lit panels; conductive circuitry printing for membrane switches, capacitive sensors, and antennae; and protective painting and powder coating for military and aerospace applications. The company has provided paint and print services for companies in diverse industries such as consumer electronics, automobiles, medical, and general industry, notably having worked with General Electric, Ford, and Boeing.
Advanced Plating Technologies (APT) is an American contract manufacturer specializing in metal plating and finishing services that was originally founded in 1948 as the Artistic Plating Company before rebranding in 2013. Located in Milwaukee, Wisconsin, the company offers plating services using various metals such as gold, electrolytic nickel, and electroless nickel. They also provide finishing and surface treatment capabilities including passivation, cleaning, and powder coating. APT chiefly serves clients in the power transmission and distribution, telecommunication, electric vehicle, and ammunition and firearms industries.
Metal Works of High Point, Inc., established in 1992, and located in High Point, North Carolina, is a custom manufacturer of fabricated metal components & assemblies. Its capabilities include laser cutting services, CNC forming, manual and robotic welding, machining and multi-axis lathe, and powder coating/metal finishing. The company covers a range of materials, including mild carbon steel, galvanized steel, stainless steel, aluminum, and brass. The applications include, furniture, telecommunications, material handling, automotive, and power generation. The company also holds a certification like the ISO 9001:2015 certificate.
Coating Methods, Inc. was founded in 2000 and is a manufacturer and supplier for powder coating services headquartered in Carpentersville, Illinois, United States. The company provides various powder coating services such as electrostatic powder coating, thermoplastic powder coating, media blasting, paint stripping, and refinishing. The company has served industries including automotive, food processing, home furnishings, machinery, and transportation. The company also offers local pick-up and delivery services directly for customers in Illinois, Indiana, Wisconsin, Michigan, and Iowa.
Ace Anodizing & Impregnanting Inc., established in 1959 and situated in Hillside, Illinois, is a Custom Manufacturer and Metal Finishing Service Company. Ace Anodizing offers architectural anodizing processes through traditional electrochemical Type II Sulfuric and Type III hard coat anodic processes, that provide a finish to components used on building exteriors. Also, the company offers the bright dip process that gives the finished piece a reflective, mirror-type finish through chemical polishing. Ace Anodizing manufactures parts from aluminum, aluminum alloys, sand cast and die cast aluminum. Its applications range from golf carts to window frames, solar panels and roofing systems.
Briteline Extrusions, founded in 1954 and headquartered in Summerville, South Carolina, is a manufacturer of aluminum parts. Serving diverse industries like aerospace, defense, construction, transportation, and consumer products, their extrusions find applications in aircraft, boats, buildings, furniture, and medical devices. Their product offerings include structural, architectural, machined, anodized, and powder-coated extrusions products such as flat bars, carpet bars, and tubes. They are a member of multiple groups such as the AAC or the Aluminum Anodizers Council, and SCMA or the South Carolina Manufacturers Alliannce.
Mills Metal Finishing (MMF) is an American contract manufacturer specializing in metal plating and surface treatment services since its establishment in Columbus, Ohio in 1992. The company’s capabilities include metal plating using materials like tin, zinc, and zinc cobalt, as well as electropolishing and powder coating to improve product durability. They also offer finishing services using anodizing, chromate conversion, and chemical deburring techniques among others to improve product performance or color stability. MMF chiefly serves client companies and corporations in the medical, aerospace, automotive, and telecommunications industries.
Tri-State Fabricators, Inc. is a company based in the Amelia, United States, established in 1983, specializing in manufacturing and supplying precision metal fabrication solutions. The company’s main activity revolves around providing a wide range of quality metal fabrication services, including sheet metal fabrication, laser cutting, welding, and assembly. Tri-State Fabricators' offerings are vital in various industries where precise and dependable metal components are required, such as electronics, telecommunications, automotive, and industrial equipment. With over three decades of experience, the company has built a strong status as an important partner for custom metal fabrication needs in the United States and beyond.
RayPaul Coating, Inc. (RPC) is a contract manufacturer specializing in powder coating services established in 1989 and based in Marietta, Georgia. The company operates within ASTM and AAMA standards to provide powder coating services for various materials including stainless and galvanized steel, as well as aluminum using epoxy, polyester, or hybrid powders. They offer clear, rust preventative, anti-microbial, or textured coating options, as well as wood-grain and decorative finishes. RPC also handles rush orders, custom packaging, and shipping for their clients in the furniture, lighting, medical, and architectural sectors.
PSI Industries, Inc., established in Irving, Texas, in 1987 is a manufacturer of turn-key custom aluminum extrusions used in industries such as Automotive and Transportation, Aerospace and Aviation. The company's products include Custom Aluminum Extrusions and services such as machining, cutting, finishing, and fabrication. The company serves markets including Electrical and Electronics, Renewable Energy, Industrial and Machinery and Consumer Goods. The company also offers services including assembly, CNC machining, and a variety of finishing options on anodizing and powder coat lines.
Storm Power Components (SPC) is an American ISO 9001 and ITAR compliant contract manufacturer of bus bars and connectors founded in 1990. Based in Decatur, Tennessee, the company manufactures custom bus bars in various sizes, shapes, and finishes. They also produce insulators, circuit board stiffeners, and flexible braided connectors. SPC products are RoHS, REACH, DFARS compliant, and primarily serve clients in the aerospace, defense, and telecommunications industries. The company also offers in-house electroplating, powder coating, fabrication, and testing services for prototyping as well as mass production orders.
MCMILLANCO, LLC is a manufacturer that provides custom component manufacturing solutions, based in West Liberty, Ohio. The services provided by MCMILLANCO, LLC are primarily focused on manufacturing processes. They offer services such as aluminum sand casting foundry, machining, metal stamping, injection molding, and vapor deposition coating. These services are utilized in the manufacturing industry to produce components, parts, and finished products such as in medical device manufacturing, steel fabrication, natural gas, defense, and film production.
Farris Group is a contract manufacturer offering various services, including prototyping, precision fabrication, additive manufacturing, assembly, and CNC machining, headquartered in Cherryville, North Carolina, since 1979. The company earned the ISO 9001 certificate in 2015, and its client base is among companies in the energy, transportation, medical, energy, and material handling sectors. The company operates two additional locations in Bessemer City and Gastonia, with a custom manufacturing department where they develop retail fixtures, point-of-purchase (POP) displays, and hand sanitizer stands.
Master Powder Coating Inc. is a full-service American coatings shop founded in 2005 and located in Santa Fe Springs, California. The company offers paints, coatings, and linings created from epoxy, polyurethane, enamel, zinc, and other materials suitable for most metal surfaces, including aluminum, stainless steel, and carbon steel. Additionally, they provide powder coating services to increase abrasion and corrosion resistance of treated materials, metallizing spray to enhance the integrity of architectural structures, and sandblasting and finishing services. It primarily serves the architectural, military, aerospace, automobile, and commercial industries.
Prestige Industrial Finishing, Inc., founded in Shelton, CT, in 1981 is a provider of Mil-Spec Painting, Solid Film Lubricant & Powder Coating Services The company's product portfolio includes Painting of Aircraft Production / Spare Assemblies, Swash Plate Assembly for Flight Safety, Priming and painting of Landing Gear, Painting and dry Film Applications for the Aerospace Industry and Lighting Components for Commercial Airlines. The company serves markets such as Military, Aerospace, Industrial & Commercial Applications.
Crest Coating, Inc., established in 1967, is a US ISO 9001:2015 certified coating applicator located in Anaheim, California. The company provides custom coating for metal, wood, ceramic, and plastic products. Their coating consists of various powders and liquids, including nylon, fluoropolymer, and Ryton Polyphenylene Sulfide, and they are a Licensed Industrial Applicator for several trademarked coatings, including Chemours, Halar, and Xylan. Additionally, the company provides screen and printing services. Their products and services are applied in the automotive, highway safety, furniture, electronics, and medical industries.
Winona Powder Coating, established in 1974 and headquartered in Etna Green, Indiana, is a coating supplier primarily in the Northern Indiana/Southern Michigan region. The company offers both E-Coat and Powder Coat finishes, featuring Axalta 6100 series polymers in its E-coat services. These services are applied across various sectors to deliver durable finishes for metal components and products. The company holds several certifications, including ISO 9001-2015 Quality Management Certification, UL Certification for Electrical Components, and recognition as a Top Shop Supplier by Product Finishing Magazine for 2020, 2021, and 2022.
Georgia Powder Coating, located in Gainesville, Georgia, USA, has been a supplier of poweder coating services since 1999. This company specializes in providing coating services for both commercial and architectural purposes, catering to government agencies, architectural firms, and industrial operations. Its powder coat process will help extend the life of metal products, from architectural elements like railings and light poles to commercial and also end-product applications like machine parts or outside furniture.
OPC Sandblasting, located in Santa Fe Springs, California, is a service supplier offering abrasive sandblasting solutions for various industries. The company offers a range of services encompassing painting, coatings, blasting, peening, as well as stripping, and refinishing. Its client base spans across industries including automotive, manufacturing, and construction sectors. These services play a crucial role in surface preparation prior to painting or coating, revitalizing metal structures, and improving adhesion for industrial purposes.
Mechanical Designs of Virginia, Inc., founded in Stuart, VA in 1983 is a supplier of custom CNC precision machining services. The company's product portfolio includes CNC machining services, Materials Expertise, CNC Laser Cutting, MIG, TIG, and Resistance Welding and Powder Coating / Finishing. Their products are used in industries such as Electronics and Telecommunications, Automotive, Transportation and aerospace and Defense. The company provides services including, quality assurance, product selection, customized services, technical support and customer service.
Excell Coatings, Inc., located in Cape Canaveral, Florida, has been a service supplier of powder coating, wet spray, media blasting and silkscreen services since 1985. Its 27,000-square-foot facility, equipment, and processes have received EPA approval and comply with ISO-9002 standards. The company also possess Military-Spec approval for both powder coating and wet spray applications, and is equipped to handle conveyorized mass production or individual parts up to 11 ft. wide, 7 ft. high, and 40 ft. long. Additionally, the company provides on-site thermal stripping, abrasive blasting, color coding, and custom color matching.
Liberty Coatings, founded in East Berlin, CT, in 2006 is a supplier of industrial coating services. The company's product portfolio includes a wide range of liquid coating solutions for surfaces of all types, Electroplating, Thermal Spray Coating and Ceramic Coating. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company also provides services such as Product Selection Guidance, warehousing and distribution and customer and technical support.
Springco is based in Cleveland, Ohio since 1977 as a supplier of metal coating and plating services. The company provides Electrocoating services that are extensively used in the automotive industry, Powder coating for items that are environmentally exposed such as truck rims, hitches, bumpers, and fenders, Acid pickling which removes inorganic contaminants on steel as well as Zinc plating and phosphating for use in various industries including Housing and Military.
Progressive Coating, established in 1983 and headquartered in Chicago, Illinois, is a service supplier of custom coating services. The company offers a range of customized services, including powder coating, vinyl plastisol dip coating, and fluidized bed coating. These services cater to diverse industries such as furniture, medical, food processing, automotive, and industrial. Its secondary services include precision surface and thread masking, silk screening, kitting, and custom packaging. Additionally, the company has achieved ISO 9001:2008 registration with SRI Quality System Registrar.
Applied Total Control Treatment Pte Ltd is a manufacturer and service provider specializing in surface finishing products that was established in 2004 and is headquartereed in Singapore. The company primarily offers its in-facility capabilities for contract surface finishing operations including electropolishing, aluminum anodizing, and conversion coating services. It also produces various plating finishes, including gold, chrome, and zinc options. The company chiefly serves clients in Southeast Asia’s aerospace, biomedical, and semiconductor industries.
Soudronic AG, founded in 1953 and headquartered in Bergdietikon, Switzerland, is an ISO 9001-certified manufacturer of welding solutions for various applications specific to the metal packaging industries. Its products include can assembling systems, drum welders, and coating systems, and it also sells accessories for welding, coating, and curing. The company produces and maintains can body production lines, operated to a maximum of 1,200 cans per minute, and used to create products like pails, cans, and drums. It has several subsidiaries, including Ocsam Cepak s.r.l., Sabatier S.A.S., and Can Man AG, and its service network covers 120 countries.
Sidrabe Vacuum Ltd is an ISO 9001:2008 and ISO 14001:2004-certified manufacturer of vacuum coating systems and equipment founded in 1962 and based in Riga, Latvia. The company primarily produces vacuum coating systems for large panels of flat glass, metal foils, and polymer films. It also offers development, implementation, and application services for its customers’ thin film technology needs or use cases. The company mainly serves client manufacturers of automotive parts, construction materials, and industrial glassware.
Voga Makina Endüstriyel Tesisler San.Tic. Ltd. was founded in 2017 and is headquartered in Istanbul, Turkey is a manufacturer of electrostatic powder coating systems and turn-key projects of liquid painting. The company offers an array of products including an aging oven for aluminum extrusions, a pickling cabinet for cleaning inox parts, and antistatic PVC plastic powder coating booths. These products have applications in petroleum gas companies, automated industries, and aluminum profiles and sheets.
Lakum is a manufacturer of metal products established in 1998 and based in Frydlant nad Ostravici, Czech Republic. The company is made up of four divisions, Lakum-AP, Lakum-KTL, Massag, and Lakum-Galma. Its products include 3D printed prototypes, logistical equipment such as quick-access racks, and small metal goods. The company also offers fabrication services including CNC pipe bending, sheet metal laser cutting, and surface treatments such as galvanizing or powder coating. It primarily serves clients in the construction, engineering, and automotive sectors.
Qingdao Chifine Machinery Co. Ltd. is a Chinese custom manufacturer of metal casting and machining products established in 2005 and located in Qingdao, Shandong. The company primarily offers custom steel, aluminum, and iron casting products. These include cast iron metal casting counterweights, steel marine connection hardware, and trailer half-axles for agricultural machinery. It also offers machine components including crown bevel gear and pinion shafts, precision machine wheel transmissions, and mechanical steel CNC lathe parts. The company serves clients from a wide range of industries including petroleum, agriculture, and mining.
Multinal Group, established in 2000 and headquartered in Zuid-Holland, Netherlands, is a manufacturer of surface treatments and industrial cleaning services. The company offers solutions for metal surface treatments, including pickling and passivation, electrolytic polishing, and electrolytic galvanizing for metals like steel, stainless steel, and aluminum. It offers non-toxic pickling products and operates water purification systems for waste treatment. It provides industrial cleaning services, including chemical cleaning of pipelines and heat exchangers, pressure testing, and toilet system cleaning. The company serves manufacturing, shipping, and construction industries, and also provides services to McDonald's, mega yachts, and navy vessels.
Hangzhou Color Powder Coating Equipment Co., Ltd., established in 2009 and located in Hangzhou, China, is a powder coating equipment manufacturer. The company offers electrostatic spray guns, high-pressure modules, circuit boards, famous gun spare parts, automatic reciprocating machines, spray booths, curing ovens, and powder coating lines. The machines efficiently spray various shapes, solving corner and recess penetration issues. These are user-friendly due to intelligent design. The company’s products are sold locally and exported to numerous countries, enjoying outstanding prestige from different clients.
Ravarini Castoldi & Co. SRL, established in 1867 and headquartered in Milan, Italy, is a manufacturer of electrostatic equipment. The company's products started with electrostatic oiling machines and electrostatic powder spraying machines. In 1986, the same electrostatic principles were developed into an electrostatic oiler for a pickling line, and the company moved forward, primarily supplying cold rolling mills and the aluminum industry with electrostatic oilers for pickling lines, cold milling lines, and continuous annealing lines. It also provides custom solutions for clients with specific requirements.
Praxair S.T. Technology, Inc. is based in Indiana, USA, and is a manufacturer of industrial surface products and coating equipment that was originally founded in 1988 before being acquired by Linde plc in 2018. The company produces a wide range of specialized coatings including fluoropolymers, thermal spray, and laser processing variations. Its other products include dust collection equipment, thermal spray coating systems, and additive manufacturing powders. The company chiefly serves clients in the power generation, textiles, and converting industries.
J. Wagner GmbH, founded in 1947 with headquarters in Markdorf, Baden-Württemberg, Germany, is a manufacturer of industrial surface coatings, tools, and equipment. The company offers products for individual consumers (DIY), contractors, and industry. DIY products include airless sprayers, paint rollers, wallpaper steamers, wall paints, fine plasters, and textured paints for home owners. Contractor products include complete systems for painters, plasterers, metalwork, and woodwork specialists. Industrial solutions include a web-based IoT platform for management of coating processes, robotic high-speed atomizers, custom-built powder coating systems, and IPS coating centers used by industries including automotive, infrastructure protection, construction, and agriculture.
STR Technical Machinery Ltd. (operating under the Strong3000 brand), established in 2003 and headquartered in Arnavutköy, Istanbul, Turkey, is an industrial powder and enamel coating equipment and system designer and manufacturer. The company's products include complete portable and microprocessor-controlled powder and enamel coating devices that include precision injectors and coating guns. It also provides individual components as well as complete coating booths and complete product solutions for wet enamel, cavity coating, and powder enamel. These products are used in the production of numerous items, such as cookware, electric ovens, and water heaters.
Quanta SRL, founded in 1991 and headquartered in Firenze, Italy, is an integrated electronic device designer and strategic partner manufacturer. The company's core products include thermal transformers, industrial automation control components, and air quality monitoring systems. It also produces biomedical freezer control systems, thermoregulatory units, and temperature control units. These products are used for various applications by food processing plants, medical device manufacturers, and automotive manufacturers. The company's services include the supply of feasibility studies, custom product production, and supply-chain management.
KIGO OE was founded in 2001 and headquartered in Thessaloniki, Greece is a manufacturer of powder coating plant equipment. The company offers a diverse product portfolio, including aerial transportation systems, filters for spray booths, and paint protection clothing. It extends services like installation of the products and rapid repairs backed by the manufacturer’s warranty. These products find applications in wastewater treatment, automotive, and automatic conveyor lines for aerial. In 2012, Kigo participated in the PaintExpo international exhibition in Karlsruhe.
Elsisan is a designer and manufacturer of complete paint plants and related products originally established in 1979 as YI-BA Engineering. Ltd. Sti. and based in Nilüfer, Bursa, Türkiye. The company offers pre-treatment and powder coating systems for surface treatment or paint application applications, and liquid paint solutions including dipping lines and paint preparation rooms. It also offers complete paint facilities for design or manufacturing industrial paints or coatings. The company’s products are commonly used by client manufacturers of automobiles, glassware, and furniture.
Electron is a manufacturer of painting and electrostatic powder coating systems established in 1972 and located in Okmeydanı, Istanbul, Turkey. The company’s product lineup includes its E-Coat+3 Series powder coating systems with software-supported rhythm control, and its E-Robot+3 Series painting robots designed for process repeatability and high motion stability. It also offers its E-Control+3 Series control panels and industrial-grade device cabinets for single point management applications. The company operates internationally across 50 countries, and its products are mainly used in industrial manufacturing operations.
Eurotherm, S.p.A., founded in 1958, is an Italian manufacturer based in Volpiano, Turin, designing, producing, and installing custom equipment for industrial finishing. The company's energy-saving lineup includes sandblasting booths for metal, glass, and ceramic surfaces, washing booths, and washing tunnels. It also produces liquid painting booths for water—and solvent-based coatings, rotational liquid painting systems, and powder coating booths. Air handling units (AHUs) are also available to meet air quality requirements in painting and coating processes. The organization incorporates Siemens Programmable Logic Controllers (PLCs) and touch-screen synoptic panels to enhance functionality and facilitate communication between the management software and the production line.
Airmadi Painting S.r.l., founded in 2003 and based in Castelnuovo del Garda, Verona, is an Italian manufacturer specializing in surface treatment solutions. The company specializes in the design, construction, and installation of industrial plants for treatment, painting, and drying processes. These plants offer a range of capabilities, including pretreatment, spray coating and painting, and polymerization. They are also equipped for additional processes such as depuration, recuperation, and recycling. Certified with ISO 9001:2000, Airmadi Painting S.r.l. has installed plants for companies like ArcelorMittal S.A. and Cetal S.A.S.
Cubotonic is a Portuguese contract manufacturer specializing in metalworking products and services that was established in Venda do Pinheiro, Mafra in 2014. The company offers a range of metal sheet, tube, surface, and component fabrication capabilities. These include bending, welding, laser cutting, assembly, and powder coating services, as well as custom design and development for unique projects or product use cases. The company chiefly serves clients in the automotive, construction, electrical, and aerospace industries.
McLaughlin Body Co., established in 1902 and headquartered in Moline, Illinois, USA, is a manufacturer specializing in Rollover Protection Structures (ROPS). The company is a source in North America for operator protection systems like cabs, ROPS/OPS, enclosures, and metal components designed for heavy-duty work equipment. Its offerings extends to an array of intricate metal components and assemblies, encompassing items like stairs, railings, and platforms. The company holds ISO 9001:2015 certification, and employs several team members with CWI & AWS certifications.
N.J. Sullivan Co., Inc. (NJSC) is a private manufacturer of electrical construction equipment based in Dulles, Virginia. Established in 1958, the company transitioned from a small machine shop to a specialized producer of bolted pressure switches, junction boxes, bussed troughs, and electrical enclosures for use in data centers, electronics, utilities, and construction. The company offers various services to its clients, including metal fabrication and finishing, precision sheet metal machining, and powder coating. NJSC operates out of a 52,000-square-foot facility and chiefly serves the military, defense, and aerospace industries along with large contractors and Fortune 500 companies.
General Devices Co., Inc., established in Indianapolis, IN in 1953 is a manufacturer of telescoping slides, cabinets, accessories, and electronic packaging. Their product portfolio includes Ball Bearing Slides, Solid Bearing Slides, Bottom Mount Slides, Cabinet & Rackmount Accessories and racks. The company serves markets including industries such as electronics/computer, telecom/data communication, medical, aerospace, military, security, and transportation. The company's manufacturing plants include is 160,000 sq. ft. and includes an R&D center.
Dimar Manufacturing Corp., founded in Clarence, New York, in 1993 is a manufacturer of Custom Sheet Metal Fabrication. The company's product portfolio includes Custom Sheet Metal Fabrication services such as cutting, bending, welding, stamping, and finishing. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company also provides services including national distribution, product selection, installation, preventative maintenance, troubleshooting, repair and customer service.
Tennessee Metallizing is an American contract manufacturer and service provider specializing in thermal spray coating since their establishment in Oliver Springs, Tennessee in 2001. The company offers sand and bead blasting, as well as flame spraying and metallizing services with the use of various powder coatings to provide durable, aesthetic finishes to fabricated parts or components. These processes can increase the lifespan of these parts and components by up to 30%, and are used extensively in a wide range of industries including in the oil and gas, defense, military, and automotive sectors.
Spectrum Custom Solutions, founded in Chippewa Falls, Wisconsin in 1968 is a manufacturer of metal fabrication, wood fabrication, and panel/lamination. The company's product portfolio includes Precision cutting, bending, punching, and welding of sheet metal components, and structural steel components for industrial, commercial, and architectural applications, welding services including MIG, TIG, and robotic welding and custom metal parts, components, and assemblies. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation.
Mekoprint, founded in 1954 and based in Stovring, Denmark, is an ISO 9001 certified manufacturer and supplier of solutions for industrial and electronics companies. The company designs and provides comprehensive solutions in the areas of printed electronics, cable harnesses, metal components, precision solutions, and graphic solutions. These products find various applications in green tech, automation, medical, professional equipment, and household appliances. Approximately 500 people work for the firm at its 40,000-square-meter European production facilities.
Rippert is a manufacturer of surface conditioning, dedusting, and filtration fans for the industrial sector established in 1966 and located in Neunkirchen-Seelscheid, Germany. The company’s products include dedusting fans for removing impurities or particles for air and water, surface conditioning fans for environmentally friendly or energy-saving applications, and industrial fans for mobile or fixed ventilation applications. It also offers consultation and onsite maintenance services for customers requiring additional support. The company chiefly serves clients in Europe’s industrial manufacturing and processing sectors.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Nordson Corporation |
14.6%
|
| 2 | Metal Coatings & Mfg. Co. |
12.2%
|
| 3 | Little Swede Industries |
9.8%
|
| 4 | Matrix Coatings Corp. |
7.3%
|
| 5 | Industrial Fabricators, Inc. |
4.9%
|
| 6 | Plastisol Products, Inc. |
4.9%
|
| 7 | AP Precision Metals, Inc. |
4.9%
|
| 8 | Lafayette Wire Products, Inc. |
4.9%
|
| 9 | DVUV, LLC |
4.9%
|
| 10 | Axalta Coating Systems |
4.9%
|
Derivation Method
The ranking is calculated based on the click share within the powder coating page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
45 | 76.3% |
|
Turkey
|
2 | 3.4% |
|
China
|
2 | 3.4% |
|
Singapore
|
1 | 1.7% |
|
Switzerland
|
1 | 1.7% |
| Latvia | 1 | 1.7% |
|
Czech Republic
|
1 | 1.7% |
|
Netherlands
|
1 | 1.7% |
|
Italy
|
1 | 1.7% |
|
Denmark
|
1 | 1.7% |
Australia
|
1 | 1.7% |
|
Germany
|
1 | 1.7% |
Greece
|
1 | 1.7% |
️Nature Grace Ltd.
20+ people viewing
Last viewed: 10 hours ago
■Health recovery/environmental purification “eco housing” project Natural antioxidant, redox, and water/air quality purification effects protect bu...
Japan Gauge Co., Ltd.
140+ people viewing
Last viewed: 1 hour ago
■ Equipped with a dedicated booth and dried furnace for solvent and powdered paint ・ As a surface protection (antifouling / water repellent) of st...
Nippon Insulation Co., Ltd.
50+ people viewing
Last viewed: 15 hours ago
Calcium silicate powder products are available in four types, depending on the crystal type and particle state. It is generally lightweight, has hi...
Media Institute Co., Ltd.
30+ people viewing
Last viewed: 13 hours ago
■Advantages of IH (high frequency induction heating) powder coating system ・Skip the degreasing process: High-frequency induction (IH) heating eli...
Sanwa Plating
180+ people viewing
Powder paint refers to painting using a powdered (powdered body) of pigments and resins. The strongest strength is that it is environmentally frien...
