All Categories

History

O-ring/bolt seal compact high temperature/high pressure reactor OVL series OVTL/UN type-OVT3.5L/UN
O-ring/bolt seal compact high temperature/high pressure reactor OVL series OVTL/UN type-Namioka Manufacturing

O-ring/bolt seal compact high temperature/high pressure reactor OVL series OVTL/UN type
Namioka Manufacturing

Namioka Manufacturing's Response Status

Response Rate

100.0%

Response Time

21.2hours

Relatively Fast Response


About This Product

■OVL series OVTL/UN type reaction equipment/individual introduction

Hydrothermal synthesis, hydrothermal reaction, functional materials, nanomaterials, zeolite synthesis, biomass, subcritical water, supercritical CO2, supercritical alcohol, supercritical water, various syntheses, polymerization reactions, hydrogen reduction, gas addition, gasification treatment This is an individual introduction page for reaction equipment for research and development purposes such as , electrochemistry, corrosion testing, etc. O-ring/bolt seal compact high temperature and high pressure reactor OVL series OVTL/UN type

■ Hydrothermal synthesis, zeolite synthesis, biomass, subcritical water, hydrogen reduction, electrochemical autoclave

The OVTL/UN O-ring/bolt type compact high temperature and high pressure reactor is a small tabletop stationary autoclave that can be used for hydrothermal synthesis, zeolite synthesis, biomass, subcritical water, hydrogen reduction, electrochemical testing, corrosion testing, etc. The design temperature and pressure differ depending on the capacity of the reactor.

■Small high-temperature, high-pressure reactor capable of handling capacities from 3.5 liters to 20 liters

The O-ring/bolt type compact high temperature and high pressure reactor OVTL/UN is available for 3.5 liters, 5 liters, 6 liters, 10 liters, and 20 liters. OVTL/UN corresponds to small pressure vessels.

■Design temperature and pressure of O-ring/bolt type small high temperature high pressure reactor (static autoclave)

The O-ring/bolt type compact high temperature and high pressure reactor OVTL/UN can be used for tests up to 270℃ and 5.5MPa. The design temperature and pressure differ depending on the reactor capacity of the autoclave.

■Suitable for stainless steel, Hastelloy, titanium, Inconel, nickel, Monel, zirconium, etc.

Compatible materials for the reactor part are SUS316, SUS316L, SUS304, SUS304L, SUS310S, SUS316Ti, SUS321, S31254, S32750, SUS329J4L, titanium, Nickel 201, Monel® 400, Haste. Approximately 24 types can be considered, including Alloy®C276, Hastelloy®C-22, Alloy59, Hastelloy®B-2, Hastelloy®X, Inconel®600, Inconel®625, Carpenter®20Cb3, Incoloy®825, and Zirconium 702.

  • Product

    O-ring/bolt seal compact high temperature/high pressure reactor OVL series OVTL/UN type

Share this product


60+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of O-ring/bolt seal compact high temperature/high pressure reactor OVL series OVTL/UN type

Image Part Number Price (excluding tax) Applicable laws and regulations Design temperature (℃) Design pressure (MPa) Installation stand (baked paint) Fitting material Thermometer protection tube Temperature sensor Gas contact material Capacity (liters) Container material Safety valve setting pressure Safety valve Pressure gauge (MPa) Band heater Valve Drain valve Seal material Other essential materials ΦD×L (mm)
O-ring/bolt seal compact high temperature/high pressure reactor OVL series OVTL/UN type-Part Number-OVT3.5L/UN

OVT3.5L/UN

Available upon quote

Small pressure vessel

270

5.5

Angle mount (SS400) with manual lifting mechanism for lid plate

When the container material is a special material, the joint material is the same material or a similar material to the container.

SUS316

Nicrobe sheath K thermocouple class1 φ1.0/φ1.6/φ2.3/φ3.2

SUS316

3.5

SUS316

5.5

Bore diameter φ3.0 Set pressure tolerance (+10%,-0%)

0~10

3.0kW

Stop (φ6.4/Cv0.73)

Ball or stop

Special FFKM

Graphite

Φ129.8×276L

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Autoclaves Products

Other products of Namioka Manufacturing

Reviews shown here are reviews of companies.


View more products of Namioka Manufacturing

About Company Handling This Product

Response Rate

100.0%


Response Time

21.2hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree