All Categories

History

O-ring clamp type compact stirring autoclave OCL series OCML/UN type-OCM3L/UN
O-ring clamp type compact stirring autoclave OCL series OCML/UN type-Namioka Manufacturing

O-ring clamp type compact stirring autoclave OCL series OCML/UN type
Namioka Manufacturing

Namioka Manufacturing's Response Status

Response Rate

100.0%

Response Time

21.2hours

Relatively Fast Response


About This Product

■OCL series OCML/UN type/Reactor/Individual introduction

Hydrothermal synthesis, hydrothermal reaction, functional materials, nanomaterials, zeolite synthesis, biomass, subcritical water, supercritical CO2, supercritical alcohol, supercritical water, various syntheses, polymerization reactions, hydrogen reduction, gas addition, gasification treatment This page introduces individual reactor products for research and development applications such as , electrochemistry, corrosion testing, etc. O-ring clamp type compact stirring autoclave OCL series OCML/UN type

■Small autoclave with stirring for hydrothermal synthesis, zeolite synthesis, biomass, polymerization reactions, hydrogen reduction, etc.

The O-ring/clamp type small autoclave with stirring OCML/UN is a small autoclave with stirring that can be used for test conditions of 200℃ and 1MPa or less, such as hydrothermal synthesis, zeolite synthesis, biomass, subcritical water, polymerization reaction, hydrogen reduction, etc. is.

■Small autoclave with stirring, suitable for 3 to 20 liters

O-ring clamp type compact stirring autoclave OCML/UN is available in capacities of 3 liters, 3.5 liters, 5 liters, 6 liters, 10 liters and 20 liters.

■Design temperature and pressure of O-ring clamp type compact stirring autoclave OCML/UN

O-ring clamp type small autoclave with stirring OCML/UN is a small autoclave with stirring that can be used for tests at 200℃ and 1MPa or less. Also, depending on the configuration and usage of the device, it may be possible to use it up to 230℃.

■Suitable for stainless steel, Hastelloy, Inconel, Monel, nickel, titanium, zirconium, etc.

Compatible materials for the reactor part are SUS316, SUS316L, SUS304, SUS304L, SUS310S, SUS316Ti, SUS321, S31254, S32750, SUS329J4L, titanium, Nickel 201, Monel® 400, Hastelloy® Approximately 25 types can be considered, including C276, Hastelloy®C-22, Alloy59, MAT®21, Hastelloy®B-2, Hastelloy®X, Inconel®600, Inconel®625, Carpenter®20Cb3, Incoloy®825, and Zirconium 702. .

  • Product

    O-ring clamp type compact stirring autoclave OCL series OCML/UN type

Share this product


100+ people viewing

Last viewed: 9 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of O-ring clamp type compact stirring autoclave OCL series OCML/UN type

Image Part Number Price (excluding tax) Applicable laws and regulations Compound meter: MPa Design temperature (℃) Design pressure (MPa) Installation stand (baked paint) Thermometer protection tube Temperature sensor Stirrer Gas contact material Capacity (liters) Container material Heater (band heater) Relief valve (setting ±10%) Motor Valve Drain valve Seal material Other essential materials ΦD×L (mm)
O-ring clamp type compact stirring autoclave OCL series OCML/UN type-Part Number-OCM3L/UN

OCM3L/UN

Available upon quote

None

-0.1~2.0

200℃

1

Curved stand (SS400)

SUS316L
*Material is the same as the container material (approximate) Material

Nicrobe sheath K thermocouple class1 φ1.0/φ1.6/φ2.3/φ3.2

Magnetic type/Rated torque 2.0N・m/Bearing CF

SUS316

3

SUS316L

2.5kW

1.0MPa

Brushless/200W/Allowable torque 2.2N・m/16~800rpm/AC200V-4.9A or less

Needle valve (orifice φ4.4/flow coefficient Cv0.37)

SUS316 ball valve C276/TI/I600/C20/M400: Stop valve
Other materials: Y-shaped bottom drain valve

FFKM

PTFE

Φ133.0×225L/φ131.8×229L

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Autoclaves Products

Other products of Namioka Manufacturing

Reviews shown here are reviews of companies.


View more products of Namioka Manufacturing

About Company Handling This Product

Response Rate

100.0%


Response Time

21.2hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree