O-ring clamp compact high temperature and high pressure reactor OCL series OCTL/UN type
Namioka Manufacturing
About This Product
■OCL series/OCTL/UN type/Reactor/Individual introduction
Hydrothermal synthesis, hydrothermal reaction, functional materials, nanomaterials, zeolite synthesis, biomass, subcritical water, supercritical CO2, supercritical alcohol, supercritical water, various syntheses, polymerization reactions, hydrogen reduction, gas addition, gasification treatment This page introduces individual reactor products for research and development applications such as , electrochemistry, corrosion testing, etc.
O-ring clamp compact high temperature and high pressure reactor OCL series OCTL/UN type
■Small high-temperature, high-pressure reaction equipment for hydrothermal synthesis, zeolite synthesis, biomass, hydrogen reduction, and electrochemistry
The O-ring clamp type compact high-temperature and high-pressure reactor OCTL/UN is a small size that can be used for test conditions of 200℃ and 1MPa or less, such as hydrothermal synthesis, zeolite synthesis, biomass, subcritical water, hydrogen reduction, electrochemical tests, and corrosion tests. This is a stationary autoclave.
■Small high-temperature, high-pressure reactor capable of handling volumes from 3 liters to 20 liters
The O-ring clamp type compact high temperature and high pressure reactor OCTL/UN is available in capacities of 3 liters, 3.5 liters, 5 liters, 6 liters, 10 liters and 20 liters.
■Design temperature and pressure of O-ring clamp type compact high temperature high pressure reactor OCTL/UN
The O-ring clamp type compact high temperature and high pressure reactor OCTL/UN is a small stationary autoclave that can be used for tests at 200℃ and below 1MPa. Also, depending on the configuration and usage of the device, it may be possible to use it up to 230℃.
■Drain valve
・SUS316 (L) ⇒ Ball valve *Drain: Y-type bottom drain valve when SUS316L is specified
・C276/TI/M400/C20/I-600/⇒Stop valve
・C-22/MAT21/I625/Ni201/HB-2⇒Y type bottom discharge valve
・S32750/SUS316L/SUS304L/SUS304⇒Y-type bottom discharge valve
-
Product
O-ring clamp compact high temperature and high pressure reactor OCL series OCTL/UN type
-
Handling Company
Namioka Manufacturing
-
Categories
1 Models of O-ring clamp compact high temperature and high pressure reactor OCL series OCTL/UN type
| Product Image | Part Number | Price (excluding tax) | Applicable laws and regulations | Capacity (liters) | Compound meter: MPa | Container material | Design pressure (MPa) | Design temperature (℃) | Gas contact material | Heater (band heater) | Installation stand (baked paint) | Other essential materials | Relief valve (setting ±10%) | Seal material | Temperature sensor | Thermometer protection tube | Valve | ΦD×L (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
OCT3L/UN |
Available upon quote | None | 3 | -0.1~2.0 | SUS316L | 1 | 200℃ | SUS316 | 2.5kW | Curved stand (SS400) | PTFE | 1.0MPa | FFKM | Nicrobe sheath K thermocouple class1 φ1.0/φ1.6/φ2.3/φ3.2 |
SUS316L *Material is the same as the container material (approximate) Material |
Needle valve (orifice φ4.4/flow coefficient Cv0.37) | Φ133.0×225L/φ131.8×229L |
Customers who viewed this product also viewed
Other products of Namioka Manufacturing
View more products of Namioka Manufacturing
About Company Handling This Product
- Japan