Autoclave unit with cooling mechanism WJK series
Namioka Manufacturing
About This Product
■WJK series autoclave cooling mechanism/individual introduction
Cooling for research and development applications such as hydrothermal synthesis, zeolite synthesis, nanomaterials, biomass, subcritical water, supercritical, functional materials, polymerization reactions, gas reduction, hydrogenation reactions, gasification processes, electrochemistry, corrosion testing, etc. This is the product introduction page for mechanical autoclaves.
■Autoclave unit with cooling mechanism WJK series/CC series/AC series
By adding an external jacket, internal cooling coil, or external air cooling mechanism to the autoclave unit, it is possible to rapidly cool heated samples and the autoclave itself.
In the case of natural cooling, it may take 2 to 3 hours for the flanges and bolts of the pressure vessel to cool down to a safe working temperature, but by using an autoclave (pressure vessel) with a cooling mechanism, it can be done in about 30 to 45 minutes. This makes it possible to open bolts, which can be expected to shorten testing time and increase the number of batch processes.
For maximum efficiency, we recommend using both water and air cooling mechanisms. (Cooling efficiency can also be improved by using a water cooling mechanism and an industrial fan in combination.)
External jacket specifications/WJK
■Product overview
This is a cooling mechanism in which a removable water cooling jacket is attached to the outside of the reactor, and water is forced to cool down inside the external jacket. Since it is a non-contact type that does not come into direct contact with the fluid, there is no fluid adhesion unlike the internal coil method, and there are no problems with operating temperatures due to the fluororesin coating.
Heating is performed using a water-resistant sheathed heater. The cost may be high as additional containers are added. The water line emits steam at high temperatures, so a drain port is required to allow it to drain safely. By building a control system that involves solenoid valves, it is also possible to automatically cool down after the program end/soak end.
■Features
・Removable water cooling jacket outside the reactor
・Because it is an external type, there is no contact with the fluid and there is no adhesion of fluid.
・If the reactor is not coated with fluororesin, there is no problem with operating temperature.
・Because it is an external method, it does not take up space inside the reactor.
-
Product
Autoclave unit with cooling mechanism WJK series
-
Handling Company
Namioka Manufacturing
-
Categories
1 Models of Autoclave unit with cooling mechanism WJK series
| Product Image | Part Number | Price (excluding tax) | Applicable laws and regulations | Design pressure | Design temperature | Number of revolutions | Pressure vessel capacity | Pressure vessel material | Stirring torque | Structure of water cooling jacket | Upper heat resistant/lower heat resistant | Water cooling jacket specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
OCM2000/UN/WJK |
Available upon quote | None | 2MPa | 200℃ | 16~800r/min | 2,000ml | SUS316 | 2.00N・m | Clamp O-ring | 330℃/330℃ | Water cooling only |
Customers who viewed this product also viewed
Other products of Namioka Manufacturing
View more products of Namioka Manufacturing
About Company Handling This Product
- Japan