All Categories

History

O-ring clamp type small high temperature and high pressure reaction vessel OCL series OCTL type-OCT3L
O-ring clamp type small high temperature and high pressure reaction vessel OCL series OCTL type-Namioka Manufacturing

O-ring clamp type small high temperature and high pressure reaction vessel OCL series OCTL type
Namioka Manufacturing

Namioka Manufacturing's Response Status

Response Rate

100.0%

Response Time

21.2hours

Relatively Fast Response


About This Product

■OCL series/OCTL type/single reactor/individual introduction

Hydrothermal synthesis, hydrothermal reaction, functional materials, nanomaterials, zeolite synthesis, biomass, subcritical water, supercritical CO2, supercritical alcohol, supercritical water, various syntheses, polymerization reactions, hydrogen reduction, gas addition, gasification treatment This page introduces individual reactor products for research and development applications such as , electrochemistry, corrosion testing, etc. O-ring clamp type small high temperature and high pressure reaction vessel OCL series OCTL type

■Small high-temperature, high-pressure reaction vessels for hydrothermal synthesis, zeolite synthesis, biomass, polymerization reactions, hydrogen reduction, and electrochemistry

O-ring clamp type compact high temperature high pressure reaction vessel OCTL is a small high temperature high pressure reaction vessel that can be used up to 200℃ for hydrothermal synthesis, zeolite synthesis, biomass, polymerization reaction, hydrogen reduction, electrochemical/corrosion testing, etc.

■ Features a simple lid plate opening/closing structure for capacities from 3 liters to 20 liters.

Standard capacities of O-ring clamp type compact high temperature and high pressure reaction vessels OCNL are 3 liters, 3.5 liters, 5 liters, 6 liters, 10 liters and 20 liters.

■Design temperature and pressure of O-ring clamp type small high temperature high pressure reaction vessel OCNL

O-ring clamp type compact high temperature high pressure reaction vessel OCNL is a small high temperature high pressure reaction vessel that can be used for tests at 200℃ and below 1MPa. The usable pressure varies depending on the reactor capacity, so please refer to the specification table. Depending on the fluid conditions, it may be possible to use it up to 230℃.

■Compatible with stainless steel, Hastelloy, titanium, Inconel, nickel, monel, and zirconium

Compatible materials for the reactor part are SUS316, SUS316L, SUS304, SUS304L, SUS310S, SUS316Ti, SUS321, S31254, S32750, SUS329J4L, titanium, Nickel 201, Monel® 400, Hastelloy® Approximately 25 types can be considered, including C276, Hastelloy®C-22, Alloy59, MAT®21, Hastelloy®B-2, Hastelloy®X, Inconel®600, Inconel®625, Carpenter®20Cb3, Incoloy®825, and Zirconium 702. .

  • Product

    O-ring clamp type small high temperature and high pressure reaction vessel OCL series OCTL type

Share this product


100+ people viewing

Last viewed: 11 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of O-ring clamp type small high temperature and high pressure reaction vessel OCL series OCTL type

Image Part Number Price (excluding tax) Applicable laws and regulations Compound meter MPa Design temperature (℃) Design pressure (MPa) Fitting material Thermometer protection tube Gas contact material Capacity (liters) Container material Remarks Relief valve (setting ±10%) Valve Seal material Other essential materials ΦD×L (mm)
O-ring clamp type small high temperature and high pressure reaction vessel OCL series OCTL type-Part Number-OCT3L

OCT3L

Available upon quote

None

-0.1~2.0

200℃

1

When the container material is a special material, the joint is made of the same material or a similar material to the container.

SUS316L
*Material is the same as the container material (approximate) Material

SUS316

3

SUS316L

*Zr container valve: Select from titanium or HC276 (standard)
*Zr container fittings, safety valves, and pressure gauges: Select from titanium or HC276
*Zirconium container: Manufactured by hollowing and screwed joint specifications

1.0MPa

Needle valve (orifice φ4.4/flow coefficient Cv0.37)

FFKM

PTFE

Φ133.0×225L/φ131.8×229L

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Laboratory Containers Products

Other products of Namioka Manufacturing

Reviews shown here are reviews of companies.


View more products of Namioka Manufacturing

About Company Handling This Product

Response Rate

100.0%


Response Time

21.2hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree