All Categories

History

Magnetic distortion open meter MSGM-10 series (open meter code)-GLCW-M-AC
Magnetic distortion open meter MSGM-10 series (open meter code)-Takuwa

Magnetic distortion open meter MSGM-10 series (open meter code)
Takuwa

Takuwa's Response Status

Response Rate

100.0%

Response Time

41.9hours


About This Product

The location of the detector magnet that moves on the magnetic distortion line extended from the data conversion unit is measured with a magnetic distortion sensor, and the amount of movement is output with a serial signal (SSI). Read the amount of gate movement by moving the permanent magnetic detector on the magnetic distortion mounted on the gate. The measured amount of movement is output to the dedicated open meter coder and the gate opening is calculated. ・ Directly opened from the sensor with the detector installed on the gate. ・ Because it does not use wire ropes or gears, there is no effect of stretching over time. ・ The detector does not break down because it does not require a power supply and has no electrical parts. ・ In the replace of the magnetic scale opening meter ・ It is a product registered in the Ministry of Land, Infrastructure, Transport and Tourism new technical information provision system (NETIS registration number KT-120101-A)

  • Product

    Magnetic distortion open meter MSGM-10 series (open meter code)

Share this product


330+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Magnetic distortion open meter MSGM-10 series (open meter code)

Click on the part number for more information about each product

Image Part Number Price (excluding tax) display input output Processing function Operation power supply voltage Environmental conditions peripheral temperature Environmental conditions around humidity structure size mass
Magnetic distortion open meter MSGM-10 series (open meter code)-Part Number-GLCW-M-AC

GLCW-M-AC

Available upon quote

VFD (fluorescent label) 16 characters x 2 lines

Serial signal (SSI) Moving amount data

(A) Sensor operation power supply DC24V (b) BCD signal 5 digits 2 Each digest digital number parity/BUSY/signal abnormality/voltage decreased output condition non-voltage A contact (photo MOS relay output) (C) Serial signal (C) Switch 1 second/1 second/1 second/1 second/1 second/1st time/1 second/1 in the output content Submit/10 minutes, and transmission speed 9,600/19,200/38,400/57,600bps depending on the data change at the time of data change

(A) Switching from the following operational method (1cm of multiplication), switching from the following operators (offset/span operation), radial gate vertical opening operations, radial gate lead open operation (b) level addition-9999.99m ~+999.99m (C) Hold upper limit/lower limit (d) zero (d) zero Settings (e) Failure diagnostic functional signal, voltage drop detection detection due to point adjustment screen operation

AC90-220v50/60Hz

-10-50 ℃

30-90%RH (but not condensation)

Rack mount type * Can be mounted on walls by changing brackets

115W × 199D × 180Dmm (not included)

2.5kg or less

Magnetic distortion open meter MSGM-10 series (open meter code)-Part Number-GLCW-M-DC

GLCW-M-DC

Available upon quote

VFD (fluorescent label) 16 characters x 2 lines

Serial signal (SSI) Moving amount data

(A) Sensor operation power supply DC24V (b) BCD signal 5 digits 2 Each digest digital number parity/BUSY/signal abnormality/voltage decreased output condition non-voltage A contact (photo MOS relay output) (C) Serial signal (C) Switch 1 second/1 second/1 second/1 second/1 second/1st time/1 second/1 in the output content Submit/10 minutes, and transmission speed 9,600/19,200/38,400/57,600bps depending on the data change at the time of data change

(A) Switching from the following operational method (1cm of multiplication), switching from the following operators (offset/span operation), radial gate vertical opening operations, radial gate lead open operation (b) level addition-9999.99m ~+999.99m (C) Hold upper limit/lower limit (d) zero (d) zero Settings (e) Failure diagnostic functional signal, voltage drop detection detection due to point adjustment screen operation

DC12V (10.5-16.5V)

-10-50 ℃

30-90%RH (but not condensation)

Rack mount type * Can be mounted on walls by changing brackets

115W × 199D × 180Dmm (not included)

2.5kg or less

Click on the part number for more information about each product

Other products of Takuwa

Reviews shown here are reviews of companies.


View more products of Takuwa

About Company Handling This Product

Response Rate

100.0%


Response Time

41.9hrs


Company Review

4.5

Company Overview

Takuwa, a company founded in 1965 and headquartered in Tokyo, Japan, is a manufacturer and supplier of water m...

See More

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree