All Categories

History

Torque driver tester TDT3/TDT3-G-TDT60CN3
Torque driver tester TDT3/TDT3-G-TDT600CN3
Torque driver tester TDT3/TDT3-G-Tohnichi Seisakusho Co., Ltd.

Torque driver tester TDT3/TDT3-G
Tohnichi Seisakusho Co., Ltd.

Tohnichi Seisakusho Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

0.5hours

Very Fast Response


About This Product

■Summary

・High-precision digital torque driver tester that eliminates measurement errors by adopting a loading mechanism ・Digital torque driver tester

■Applications

- Calibration, adjustment, and repair of torque drivers. - Calibration, adjustment, and repair of small capacity torque wrenches.

■Features

・Digital, there are no reading errors due to parallax. ・The "loading mechanism" suppresses fluctuations in measurement conditions caused by the tilt of the torque driver. ・Since the measurement range is wide, one unit can support many types of torque drivers. ・With pass/fail judgment function. Depending on the judgment result, the display color changes to white/red/blue, etc., making it easy to distinguish at a glance. ・Power supply is AC100V to 240V. ・We have a track record of producing products in American units (lbf, in, etc.) for the domestic aircraft industry and for export to the United States, and in metric (kgf, cm, etc.) specifications for export to Asia. ・DtRcv (Data Receiver), a wired data input tool that enables data management in Excel (R), can be downloaded for free. *"ExRcv (Excel Receiver)" was updated to "DtRcv (Data Receiver)" in March 2021. *Excel (R) is a registered trademark of Microsoft Corporation.

■Caution

・One scale in M99 mode of TDT2 compatible mode is 0.01 for TDT60CN3 and 0.1 for TDT600CN3. ・STA is a loading device for work torque drivers (LTD, RTD, etc.). ・LTA is a loading device for direct reading torque drivers (FTD, STC, etc.). ・TDTLA3 can measure a torque wrench of 2cN・m to 60cN・m for TDT60CN3, and a torque wrench of 20cN・m to 600cN・m for TDT600CN3. ・To attach TDTLA3 to TDT/TDT2, loading adapter No. 485 for TDT/TDT2 is required separately. ・To attach STA or LTA to TDT/TDT2, TDT/TDT2 loading adapter No. 486 is required separately.

■Accessories

AC adapter (model: BA-6), loading device for STA (LTD/RTD), clamp tool *The image of TDT600CN3 is the one with LTA (loading device for direct-reading torque drivers (FTD, STC, etc.)) installed.

  • Product

    Torque driver tester TDT3/TDT3-G

Share this product


140+ people viewing

Last viewed: 2 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Torque driver tester TDT3/TDT3-G

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply AC [V] Mass approximately [kg] Statistical processing Measurement mode Drive angle [mm] Pass/fail judgment upper and lower limit value registration Operating environment range [℃] Reset Torque adjustment range (N・m) /Minimum to maximum Torque adjustment range (N・m)/1 scale Data output Data memory Zero adjustment
Torque driver tester TDT3/TDT3-G-Part Number-TDT60CN3

TDT60CN3

Available upon quote

100~240±10% 50/60Hz *12V (When using optional battery pack BP-100-3)

11

Number of samples, maximum value, minimum value, average value

PEAK/RUN

Hexagonal width across flats 6.35 male (with minus 0.7 groove)

10 types

0~40 No condensation

Manual/Auto (0.1~5.0sec arbitrary setting possible)

2~60

0.005

RS232C (compliant), USB connector (B type) compatible serial communication

1,000 data *99 data in M99 mode of TDT2 compatible mode

Automatic

Torque driver tester TDT3/TDT3-G-Part Number-TDT600CN3

TDT600CN3

Available upon quote

100~240±10% 50/60Hz *12V (When using optional battery pack BP-100-3)

11

Number of samples, maximum value, minimum value, average value

PEAK/RUN

Hexagonal width across flats 6.35 male (with minus 0.7 groove)

10 types

0~40 No condensation

Manual/Auto (0.1~5.0sec arbitrary setting possible)

20~600

0.05

RS232C (compliant), USB connector (B type) compatible serial communication

1,000 data *99 data in M99 mode of TDT2 compatible mode

Automatic

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Torque Wrench Tester Products

Other products of Tohnichi Seisakusho Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Tohnichi Seisakusho Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

0.5hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree