MR540, MR580 USB/LAN compatible 4 -axis/8 -axis motion control board
NOVA Electronics, Inc.

MR540

独立2パルス / 1パルス方式選択可能 正論理 / 負論理出力選択可能

Independent 2-pulse/1-pulse method selectable, positive logic/negative logic output selectable

DC21.6 - DC26.4 V

DC24V±10%

954 - 312,500,000,000 pps / sec

954 (when magnification = 1) ~ 31.25 × 109 (when magnification = 500) pps/sec2

4 軸

4 axes

1 - 4,000,000 pps

Range: 1pps~4Mpps, Accuracy: ±0.1% or less (relative to set value), Speed ​​magnification: 1~500

0 - 4,294,967,295

0~4,294,967,295 (quantitative pulse drive)

・Supported OS: Windows 10, 8.1, 7, Vista, XP (32-bit version, 64-bit version supported) ・Supported languages: VC (C++), VB, VB.NET ・Number of applications that can be executed on one PC: 1

・USB: Mini B plug, LAN: RJ45 ・Motion control I/F: MIL standard compliant, 40 pin x 2 stacked

・MR540/MR580 device driver, USB driver ・Evaluation tool, sample program

The number of output pulses and drive speed can be changed during driving.

1 (when magnification = 1) ~ 4 × 106 (when magnification = 500) pps

Differential line driver (AM26C31) output

1 (when magnification = 1) ~ 4 × 106 (when magnification = 500) pps

125 (when magnification = 1) ~ 500×106 (when magnification = 500) pps/sec

Automatic deceleration (asymmetric linear acceleration/deceleration also possible)/Manual deceleration

Constant speed, symmetrical/asymmetrical linear acceleration/deceleration, symmetrical/asymmetrical S-shaped acceleration/deceleration

Linear acceleration/deceleration fixed pulse drive/S-curve acceleration/deceleration fixed pulse drive

1pps~4Mpps

Isolation by photo coupler

Yes

・Drive pulse output signal: Differential line drive output ・Other outputs: Open collector output (maximum sink current 60mA)

・Maximum number of control units: 16 units *1 ・Identification of this product: Rotary switch unit number (0~F)

0~45℃ (no condensation)

W98.0×H129.0×D26.2mm (excluding connector, including bottom plate)

Main board

160g

・USB2.0 (FullSpeed12Mbps), self-powered, response time for one command is about 1msec. - LAN (10BASE-T, 100BASE-TX), IP address is automatically obtained from the DHCP server *1 The response time for one command via LAN communication (3m cable, one-to-one connection) is approximately 0.5msec.

120 mA MAX (When driving all axes with drive output load current of 12 mA/axis, sensor power output not included)

MR580

独立2パルス / 1パルス方式選択可能 正論理 / 負論理出力選択可能

Independent 2-pulse/1-pulse method selectable, positive logic/negative logic output selectable

DC21.6 - DC26.4 V

DC24V±10%

954 - 312,500,000,000 pps / sec

954 (when magnification = 1) ~ 31.25 × 109 (when magnification = 500) pps/sec2

8 軸

8 axes

1 - 4,000,000 pps

Range: 1pps~4Mpps, Accuracy: ±0.1% or less (relative to set value), Speed ​​magnification: 1~500

0 - 4,294,967,295

0~4,294,967,295 (quantitative pulse drive)

・Supported OS/Supported languages/Number of applications: Windows 10, 8.1, 7, Vista, XP (32-bit and 64-bit versions supported): VC (C++), VB, VB.NET: Number of applications that can be executed on one PC is 1

・USB: Mini B plug, LAN: RJ45 ・Motion control I/F: MIL standard compliant, 40 pin x 2 stacked

・MR540/MR580 device driver, USB driver ・Evaluation tool, sample program

The number of output pulses and drive speed can be changed during driving.

1 (when magnification = 1) ~ 4 × 106 (when magnification = 500) pps

Differential line driver (AM26C31) output

1 (when magnification = 1) ~ 4 × 106 (when magnification = 500) pps

125 (when magnification = 1) ~ 500×106 (when magnification = 500) pps/sec

Automatic deceleration (asymmetric linear acceleration/deceleration also possible)/Manual deceleration

Constant speed, symmetrical/asymmetrical linear acceleration/deceleration, symmetrical/asymmetrical S-shaped acceleration/deceleration

Linear acceleration/deceleration fixed pulse drive/S-curve acceleration/deceleration fixed pulse drive

1pps~4Mpps

Isolation by photo coupler

Yes

・Drive pulse output signal: Differential line drive output ・Other outputs: Open collector output (maximum sink current 60mA)

・Maximum number of control units: 16 units *1 ・Identification of this product: Rotary switch unit number (0~F)

0~45℃ (no condensation)

W98.0×H129.0×D47.8mm (excluding connector, including bottom plate)

Main board + additional 4-axis board

260g

・USB2.0 (FullSpeed12Mbps), self-powered, response time for one command is about 1msec. - LAN (10BASE-T, 100BASE-TX), IP address is automatically obtained from the DHCP server *1 The response time for one command via LAN communication (3m cable, one-to-one connection) is approximately 0.5msec.

200 mA MAX (When driving all axes with drive output load current of 12 mA/axis, sensor power output not included)