MCX514 -High -performance 4 -axis motion control IC
NOVA Electronics, Inc.
About This Product
The MCX514 is a 4 -axis motion control IC that can connect to the top CPU, 8 -bit, 16 -bit baths and I2C serial interface buses to position and control pulse columns and stepping motors.
You can select an arbitrary 2, 3 or 4 axis in the 4 -axis to perform straight pilots, interpolate arcs, helical interpolation, bit pattern interpolation, and continuous interpolation.
In addition, multiple chips are connected to MCX514 to perform multi -axis straight interpolation.
This IC eliminates the speed magnification (range) setting, and can freely output the drive speed from 1 pps to a maximum of 8MPPS in 1 pps.
･ 2 axis/3 axis/4 -axis straight line interpolation
･ CW/CCW arc interpolation
･ Bit pattern interpolation
･ Helical interpolation
･ Subscription short axis pulse uniform mode
･ 2 -axis high precision line speed constant mode
･ Multi -chip interpolation
･ Speed range free
･ Automatic deceleration of asymmetric trapezoidal acceleration deceleration
･ Remarket line S -shaped/trapezoidal acceleration deceleration drive
･ Automatic starting point
･ Split pulse function
･ I2C serial interface bus
･ Synchronous operation 4 sets of each axis
･ 1 timer axis
･ Maximum drive speed: 8MPPS
･ Package: 144 -pin QFP
･ Power supply voltage: 3.3V ± 10%
* 1 CLK = 20MHz maximum speed 10MPPS
* 2 A parameter used for S -shaped deceleration drive
* 3 It is a pulse range that can be set during the drive that outputs the specified number of pulse. Output infinite pulse during continuous driving
* 4 Automatic principles are stopped by calculating the deceleration starting position in the IC and automatically stopped deceleration from the specified moving pulse amount. For manual deceleration, set the deceleration start position from the top and stop the deceleration. This IC can stop automatic deceleration except for asymmetric S -shaped deceleration
* 5 Changes in the number of output pulse after the start of the drive can only drive the relative position in the same direction.
* 6 The logical position counter counts the output drive pulse. The real position counter counts the encoder input pulse
-
Product
MCX514 -High -performance 4 -axis motion control IC
-
Handling Company
NOVA Electronics, Inc.
1 Models of MCX514 -High -performance 4 -axis motion control IC
| Product Image | Part Number | Price (excluding tax) | Arc/straight interpolation function (director) | Data bus chief | Drive maximum speed (CLK = 16MHz) | Drive output pulse (CLK = 16MHz) Output speed range * 1 | Drive output pulse acceleration deceleration curve | Drive output pulse acceleration increase / decrease rate range * 2 | Drive output pulse acceleration range | Drive output pulse drive pulse output logic | Drive output pulse drive pulse output method | Drive output pulse drive pulse output terminal | Drive output pulse drive pulse range * 3 | Drive output pulse initial speed range * 1 | Drive output pulse output speed accuracy | Drive output pulse override * 5 | Drive output pulse position drive deceleration stop mode * 4 | Drive output pulse triangle prevention function | Encoder input pulse input pulse input method | Encoder input pulse input pulse terminal | Location counter real position counter * 6 | Multipurpose register bit length / number | Multipurpose register use | Number of control axes | Position counter logical position counter * 6 | Position counter variable ring | Power-supply voltage | Soft memit stop mode | Soft remitt setting range | Speed range free function | Type of drive output pulse drive instruction |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
MCX514 |
$ 52.80〜 | 32bit | 16/8 Bit selectable | 8MPPS | 1PPS ~ 8,000,000PPS (CLK = 20MHz: Up to 10,000,000PPS) | Final speed, symmetric/asymmetric direct line acceleration deceleration, symmetric/asymmetric S -shaped deceleration | 1PPS/Sec to 1,073,741,823PPS/S | 1PPS/SEC ~ 536,870,911PPS/Sec | Positive logic/negative logic output can be selected | Independence 2 pulse/1 pulse/direction/2 phase 4 multiples/2 phase 2 multiplication | Terminal replacement can be replaced | ・ Relative position drive-2,147,483,646-2,147,483,646 ・ Absolute position drive-2,147,483,646 ~ 2,147,483,646 | 1PPS to 8,000,000pps | ± 0.1%or less (for setting values) | Changing the number of output pulse and drive speed during the drive | Automatic deceleration stop/manual deceleration stop | Both straight -line acceleration deceleration and S -shaped deceleration | 2 Phase 4 Uplitations/2 Phase 2 Suption/2 Phase 1 Couple/Up and Down Pulse Select | Terminal replacement can be replaced | Count range -2,147,483,648 ~+2,147,483,647 | 32 -bit length, 4 pieces/axis | Save the position / speed / timer comparison, register the position / speed, the current location, speed, timer value, etc. during the drive | 4 axis | Count range -2,147,483,648 ~+2,147,483,647 | You can set the maximum count of each set counter | 3.3V ± 10% | Lass stop/immediate stop selection can be selected | -2,147,483,647-+2,147,483,647 | Have | Relative position, absolute position, + direction continuous, -continuous direction |
Customers who viewed this product also viewed
MCX501 -High -performance 1 -axis motion control IC
NOVA Electronics, Inc.
$16.50
Motion Controllers
Other products of NOVA Electronics, Inc.
MCX501 -High -performance 1 -axis motion control IC
NOVA Electronics, Inc.
$16.50
Motion Controllers
View more products of NOVA Electronics, Inc.
About Company Handling This Product
- Japan
- Since 2019