All Categories

History

MC8541P, MC8541PE 4 -axis motion control board-MC8541P
MC8541P, MC8541PE 4 -axis motion control board-MC8541Pe
MC8541P, MC8541PE 4 -axis motion control board-NOVA Electronics, Inc.

MC8541P, MC8541PE 4 -axis motion control board
NOVA Electronics, Inc.


About This Product

The MC8541P is a circuit board equipped with a 4-axis motor control IC "MCX514" with an interpolation function that supports PCI-Express X1. You can position or control the four -axis servo motor or stepping motor on one board independently or speed. The interpolation function is enhanced than the conventional product, and it is possible to interpolate up to 4 axes up to 4 axes. In addition, it has a CW/CCW arc interpolation, a 2-4 -axis bit pattern interpolation, and a CW/CCW helical interpolation. ・ Speed ​​range free ・ Helical interpolation ・ Eight -stage priz buffer for continuous interpolation ・ Various interpolation functions * 1 Bit pattern interpolation is 4MPPS or less, helical interpolation is 250 kpps or less, and continuous interpolation is 4MPPS or less. * 2 This parameter used for S -shaped deceleration drive.

  • Product

    MC8541P, MC8541PE 4 -axis motion control board

Share this product


390+ people viewing

Last viewed: 18 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of MC8541P, MC8541PE 4 -axis motion control board

Click on the part number for more information about each product

Image Part Number Price (excluding tax) XYZU common specifications for each axis Drive pulse output Drive pulse output method Number of control axes XYZU common specifications for each axis Drive pulse output Output speed range XYZU common specifications for each axis Drive pulse output acceleration increase/decrease rate range *2 XYZU common specifications for each axis Drive pulse output Output pulse range I/O occupied address XYZU common specification drive pulse output override for each axis XYZU common specifications for each axis Drive pulse output Drive pulse output theory Common specifications for each XYZU axis Drive pulse output Drive pulse output terminal XYZU common specifications for each axis Drive pulse output Type of drive command Common specifications for each XYZU axis Drive pulse output triangle prevention function XYZU common specifications for each axis Drive pulse output position Drive deceleration stop mode XYZU common specification drive pulse output output circuit for each axis XYZU common specifications for each axis Drive pulse output output speed system Common specifications for each XYZU axis Drive pulse output initial speed range XYZU common specifications for each axis Drive pulse output acceleration/deceleration curve Common specifications for each XYZU axis Drive pulse output acceleration range Data debit width Drive output speed range Helical interpolation function Board interface Arc/linear interpolation function Interrupt Interpolation functionOther interpolation functions Interpolation function interpolation position accuracy Interpolation function interpolation type Interpolation function interpolation range Interpolation function interpolation speed *1
MC8541P, MC8541PE 4 -axis motion control board-Part Number-MC8541P

MC8541P

$ 507.00〜

独立2パルス / 1パルス 方向 / 2相4逓倍 / 2相2逓倍方式選択可能

Independent 2-pulse, 1-pulse/direction, 2-phase 4-multiply, 2-phase 2-multiply method can be selected

4 軸

4 axes

1 - 8,000,000 pps

1pps~8Mpps

1 - 1,073,741,823 pps / sec

1pps/sec²~1,073,741,823pps/sec²

-2,147,483,646 - 2,147,483,646

-2,147,483,646~+2,147,483,646drivepulse (relative position/absolute position drive)

Determined arbitrarily by PnP function

The number of output pulses and drive speed can be changed during driving.

Positive logic/negative logic output selectable

Terminals can be replaced

Relative position, absolute position, + direction continuous, - direction continuous

Both linear acceleration/deceleration and S-curve acceleration/deceleration are available.

Automatic deceleration/stop/manual deceleration/stop

Differential line driver (AM26C31) output

±0.1% or less (relative to set value)

1pps~8Mpps

Constant speed, symmetrical/asymmetrical trapezoidal, symmetrical/asymmetrical parabolic S-shape

1pps/sec~536,870,911pps/sec

16Bit (MCX514 data bus)

1pps~8Mpps

Yes

PCI bus

Yes

Determined arbitrarily by PnP function

Arbitrary axis selectable, uniform short axis pulse, constant linear velocity, continuous interpolation, data control with 8-stage pre-buffer

±0.5LSB or less (linear interpolation), ±1LSB or less (circular interpolation)

2~4 axis linear interpolation, CW/CCW circular interpolation, 2~4 axis bit pattern interpolation, CW/CCW helical interpolation

Each axis -2,147,483,646+2,147,483,646drivepulse

1PPS~8Mpps

MC8541P, MC8541PE 4 -axis motion control board-Part Number-MC8541Pe

MC8541Pe

$ 507.00〜

独立2パルス / 1パルス 方向 / 2相4逓倍 / 2相2逓倍方式選択可能

Independent 2-pulse, 1-pulse/direction, 2-phase 4-multiply, 2-phase 2-multiply method can be selected

4 軸

4 axes

1 - 8,000,000 pps

1pps~8Mpps

1 - 1,073,741,823 pps / sec

1pps/sec²~1,073,741,823pps/sec²

-2,147,483,646 - 2,147,483,646

-2,147,483,646~+2,147,483,646drivepulse (relative position/absolute position drive)

Determined arbitrarily by PnP function

The number of output pulses and drive speed can be changed during driving.

Positive logic/negative logic output selectable

Terminals can be replaced

Relative position, absolute position, + direction continuous, - direction continuous

Both linear acceleration/deceleration and S-curve acceleration/deceleration are available.

Automatic deceleration/stop/manual deceleration/stop

Differential line driver (AM26C31) output

±0.1% or less (relative to set value)

1pps~8Mpps

Constant speed, symmetrical/asymmetrical trapezoidal, symmetrical/asymmetrical parabolic S-shape

1pps/sec~536,870,911pps/sec

16Bit (MCX514 data bus)

1pps~8Mpps

Yes

PCI-ExpressBaseSpecificationRev.1.0ax1

Yes

Determined arbitrarily by PnP function

Arbitrary axis selectable, uniform short axis pulse, constant linear velocity, continuous interpolation, data control with 8-stage pre-buffer

±0.5LSB or less (linear interpolation), ±1LSB or less (circular interpolation)

2~4 axis linear interpolation, CW/CCW circular interpolation, 2~4 axis bit pattern interpolation, CW/CCW helical interpolation

Each axis -2,147,483,646+2,147,483,646drivepulse

1PPS~8Mpps

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Motion Controllers Products

Other products of NOVA Electronics, Inc.

Reviews shown here are reviews of companies.


View more products of NOVA Electronics, Inc.

About Company Handling This Product

Company Overview

NOVA electronics, Inc. focuses exclusively on motion control. NOVA creates full motion control solutions inclu...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree