All Categories

History

MCX512 -High -performance 2 -axis motion control IC-MCX512
MCX512 -High -performance 2 -axis motion control IC-NOVA Electronics, Inc.

MCX512 -High -performance 2 -axis motion control IC
NOVA Electronics, Inc.


About This Product

The MCX512 is a two -axis motion control IC that can connect to the top CPU, 8 -bit, 16 -bit bath and I2C serial interface bus, and use pulse -row servo motors and stepping motors for each axis, or control speed control. Two -axis straight line interpolation, arc interpolation, bit pattern interpolation, and continuous interpolation can be performed. This IC eliminates the speed magnification (range) setting, and can freely output the drive speed from 1 pps to a maximum of 8MPPS in 1 pps. ・ 2 -axis straight line interpolation ・ CW/CCW arc interpolation ・ Continuous interpolation 8 -stage prisons buffer ・ Bit pattern interpolation ・ Subscription short axis pulse uniform mode ・ 2 -axis high precision line speed constant mode ・ Speed ​​range free ・ Automatic deceleration of asymmetric trapezoidal acceleration deceleration ・ Remarket line S -shaped/trapezoidal acceleration deceleration drive ·Overdrive ・ Automatic starting point ・ Split pulse function ・ I2C serial interface bus ・ Synchronous operation 4 sets of each axis ・ 1 timer axis ・ Maximum drive speed: 8MPPS ・ Package: 100 pins QFP ・ Power supply voltage: 3.3V ± 10% * 1 CLK = 20MHz maximum speed 10MPPS * 2 A parameter used for S -shaped deceleration drive * 3 It is a pulse range that can be set during the drive that outputs the specified number of pulse. Output infinite pulse during continuous driving * 4 Automatic principles are stopped by calculating the deceleration starting position in the IC and automatically stopped deceleration from the specified moving pulse amount. For manual deceleration, set the deceleration start position from the top and stop the deceleration. This IC can stop automatic deceleration except for asymmetric S -shaped deceleration * 5 Changes in the number of output pulse after the start of the drive can only drive the relative position in the same direction. * 6 The logical position counter counts the output drive pulse. The real position counter counts the encoder input pulse

  • Product

    MCX512 -High -performance 2 -axis motion control IC

Share this product


370+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of MCX512 -High -performance 2 -axis motion control IC

Image Part Number Price (excluding tax) Drive output pulse Drive pulse output method Encoder input pulse input pulse input method Power supply voltage Number of control axes Drive output pulse (when CLK = 16MHz) output speed range *1 Drive output pulse acceleration increase/decrease rate range *2 Drive output pulse Drive pulse range *3 Encoder input pulse input pulse terminal Data bus length Drive output pulse override *5 Drive output pulse Drive pulse output terminal Drive output pulse Drive pulse output logic Type of drive output pulse drive command Drive output pulse triangle prevention function Drive output pulse position Drive deceleration stop mode *4 Drive output pulse output speed accuracy Drive output pulse acceleration/deceleration curve Drive output pulse acceleration range Maximum drive speed (when CLK=16MHz) Circular/linear interpolation function (calculation length) Multi-purpose register bit length/number Multi-purpose register use Speed ​​range free function
MCX512 -High -performance 2 -axis motion control IC-Part Number-MCX512

MCX512

$ 35.75〜

独立2パルス / 1パルス 方向 / 2相4逓倍 / 2相2逓倍選択可能

Independent 2 pulses/1 pulse/direction/2 phase 4 times/2 phases 2 times can be selected

2相4逓倍 / 2相2逓倍 / 2相1逓倍 / アップダウンパルス選択可能

2-phase 4x/2-phase 2x/2-phase 1x/up/down pulse selectable

2.97 - 3.63 V

3.3V±10%

2 軸

2 axes

1 - 8,000,000 pps

1pps~8,000,000pps (CLK=20MHz: maximum 10,000,000pps)

1 - 1,073,741,823 pps / sec

1pps/sec~1,073,741,823pps/sec

-2,147,483,646 - 2,147,483,646

・Relative position drive-2,147,483,646~2,147,483,646 ・Absolute position drive-2,147,483,646~2,147,483,646

Terminals can be replaced

16/8 bit selectable

The number of output pulses and drive speed can be changed during driving.

Terminals can be replaced

Positive logic/negative logic output selectable

Relative position, absolute position, + direction continuous, - direction continuous

Both linear acceleration/deceleration and S-curve acceleration/deceleration are available.

Automatic deceleration/stop/manual deceleration/stop

±0.1% or less (relative to set value)

Constant speed, symmetrical/asymmetrical linear acceleration/deceleration, symmetrical/asymmetrical S-shaped acceleration/deceleration

1pps/sec~536,870,911pps/sec

8Mpps

32bit

32 bit length, 4 pieces/axis

Compare position/speed/timer, register position/speed, save current position/speed/timer value while driving, etc.

Yes

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Motion Controllers Products

Other products of NOVA Electronics, Inc.

Reviews shown here are reviews of companies.


View more products of NOVA Electronics, Inc.

About Company Handling This Product

Company Overview

NOVA electronics, Inc. focuses exclusively on motion control. NOVA creates full motion control solutions inclu...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree