All Categories

History

Weather/Environmental Measuring Instruments Data Logger for Weather Station HD33MT.4-HD33MT.4
Weather/Environmental Measuring Instruments Data Logger for Weather Station HD33MT.4-Sakaki Corporation Co., Ltd.

Weather/Environmental Measuring Instruments Data Logger for Weather Station HD33MT.4
Sakaki Corporation Co., Ltd.

Sakaki Corporation Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

8.0hours

Fast Response


About This Product

■Summary

・Equipped with 4 analog inputs, 2 contact inputs, RS485 Modbus-RTU, and SDI-12 digital inputs, allowing connection of a wide variety of sensors. ・Built-in LTE module, data transmission via email and FTP, data upload to HTTP servers such as Senseka Cloud (free) ・Can be set as either master or slave as a Modbus device ・Alarm contact output x 2, alarm notification via email and SMS ・Powered by external DC power or solar panel, built-in battery life several weeks ・Time synchronization with HTTP or NTP reference server using built-in clock The data logger HD33MT.4 with a built-in 4G (LTE) module can be used in a wide range of fields, including not only general weather but also disaster prevention applications such as floods, and can be used to monitor various data such as temperature, humidity, atmospheric pressure, solar radiation, rainfall, wind direction and speed, water level, etc. This enables remote monitoring and alarming of physical quantities. Upon request, we can also supply an M12 connector input for a combined relative humidity/temperature (NTC sensor) probe or a dedicated temperature (NTC sensor) probe. If a temperature/humidity composite probe is connected, dew point temperature can also be calculated. Data communication via 4G (LTE) eliminates the need to go to the field to remove the data storage device from the data logger or download measurement data to a PC, dramatically improving the workability and safety of measurement value monitoring. Masu.

  • Product

    Weather/Environmental Measuring Instruments Data Logger for Weather Station HD33MT.4

Share this product


50+ people viewing

Last viewed: 34 minutes ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Weather/Environmental Measuring Instruments Data Logger for Weather Station HD33MT.4

Image Part Number Price (excluding tax) Battery Weight Measurement interval Current consumption at DC12V Connection with external probe Installation method Operating conditions Internal memory Internal clock drift Power supply Logging interval Housing Display Switching sensor power output Ethernet connection Antenna Alarm Connection with PC LED display
Weather/Environmental Measuring Instruments Data Logger for Weather Station HD33MT.4-Part Number-HD33MT.4

HD33MT.4

Available upon quote

Optional, built-in 12V/3.4Ah lead battery, maximum charging current 1A
Battery life depends on the type and number of sensors connected

Approximately 1kg

1, 2, 5, 10, 15, 30 seconds/1, 2, 5, 10, 15, 30, 60 minutes

<4mA: No Ethernet module, no mobile (4G) network operation
~200mA: with Ethernet module, no mobile (4G) network operation

M12 connector or cable gland

Attaches to φ40mm prop mast

-40~+70℃/0~100%RH (models without LCD display)
-20~+70℃/0~100%RH (models with LCD display)

Data circular storage management or logging stop when memory is saturated. The number of stored samples is 242,850 to 858,070 depending on the number of physical quantities detected.

±2ppm (0~+40℃) /±5ppm (-40~+70℃)

When using rechargeable batteries: DC18~30V
If you do not use rechargeable batteries:
DC7~30V (without Ethernet module)
DC12~30V (with Ethernet module)

1, 2, 5, 10, 15, 30 seconds/1, 2, 5, 10, 15, 30, 60 minutes

External dimensions: 270 x 170 x 110mm (excluding external antenna)
Material: Polycarbonate (PC)
Protection class: IP65 (with USB connector protective cap attached)

Custom LCD optional

If the data logger is powered by a solar panel (+Vpanel input), the output will be equal to the voltage of the internal lead battery (typically 12V).

RJ45 connector (only with optional Ethernet module)

External

Sending emails and SMS. 2 x normally open (NO) alarm contact outputs. Max 300mA @DC30V resistive load

USB port, mini USB connector

2-color LED: Power on (red flashing), mobile (4G) network operation (green flashing)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Data Loggers Products

Other products of Sakaki Corporation Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Sakaki Corporation Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

8.0hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree