All Categories

History

Capacitive level sensor/level meter CP1 series-CP1-B1T-150-500*N
Capacitive level sensor/level meter CP1 series-RKC INSTRUMENT

Capacitive level sensor/level meter CP1 series
RKC INSTRUMENT

RKC INSTRUMENT's Response Status

Response Rate

100.0%

Response Time

14.3hours

Relatively Fast Response


About This Product

■Level control of chemical solutions, pure water, drinking water, raw material liquids, etc. CP1-B1T

・The electrode is PFA coated and can be used with various chemical solutions. ・With a built-in reference electrode, stable measurements are possible even on resin tanks and insulating layers such as quartz glass, and automatic correction can be made for changes in liquid characteristics.

■Liquefied gas level measurement CP1-E1W

We have a special specification for liquefied gas that has a gas flow part inside the electrode.

■Level measurement of various processing liquids CP1-C□B

This is a general electrode for conductive liquids. *If the tank is not grounded, it must be grounded.

■Level measurement of fats and oils such as cooking oil and engine oil, and molten resin such as hot melt CP1-H3B

This is a general electrode for non-conductive liquids. *If the object to be measured is at a high temperature, make sure that the temperature of the electrode head (cable and electrode joint) is below 150℃. *If the tank is not grounded, it must be grounded. *Other product numbers are available.

  • Product

    Capacitive level sensor/level meter CP1 series

Share this product


250+ people viewing

Last viewed: 7 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Capacitive level sensor/level meter CP1 series

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Electrode length Electrode material Electrode pressure resistance Measurement object Temperature drift Effective measurement length Connection converter Sensitivity Operating temperature range Sensor (electrode) type Cable length
Capacitive level sensor/level meter CP1 series-Part Number-CP1-B1T-150-500*N

CP1-B1T-150-500*N

Available upon quote

150mm

Electrode body: SUS304
Electrode insulation part: PFA coating t=1.5

Maximum 196KPa or less
(If the fitting seal pressure resistance you use is less than this, it depends on the fitting seal pressure resistance.)

Conductive liquids (including ultrapure water)

±200ppm/℃

70mm or more
*When the effective measurement length is less than 150mm, it is necessary to change the RMC-500 settings.

For connecting RMC-410

Approx. 60pF/m (when measuring conductive liquid)

(Electrode part) -10~180℃ (No freezing)
(Cable part) -10~180℃ (No freezing)

PFA coating for chemical liquid (reference + measurement + ground 3 electrode integrated) Φ10

500mm

Capacitive level sensor/level meter CP1 series-Part Number-CP1-B1T-150-500*N-A

CP1-B1T-150-500*N-A

Available upon quote

150mm

Electrode body: SUS304
Electrode insulation part: PFA coating t=1.5

Maximum 196KPa or less
(If the fitting seal pressure resistance you use is less than this, it depends on the fitting seal pressure resistance.)

Conductive liquids (including ultrapure water)

±200ppm/℃

70mm or more
*When the effective measurement length is less than 150mm, it is necessary to change the RMC-500 settings.

For connecting RMC-500

Approx. 60pF/m (when measuring conductive liquid)

(Electrode part) -10~180℃ (No freezing)
(Cable part) -10~180℃ (No freezing)

PFA coating for chemical liquid (reference + measurement + ground 3 electrode integrated) Φ10

500mm

Capacitive level sensor/level meter CP1 series-Part Number-CP1-B1T-150-1000*N

CP1-B1T-150-1000*N

Available upon quote

150mm

Electrode body: SUS304
Electrode insulation part: PFA coating t=1.5

Maximum 196KPa or less
(If the fitting seal pressure resistance you use is less than this, it depends on the fitting seal pressure resistance.)

Conductive liquids (including ultrapure water)

±200ppm/℃

70mm or more
*When the effective measurement length is less than 150mm, it is necessary to change the RMC-500 settings.

For connecting RMC-410

Approx. 60pF/m (when measuring conductive liquid)

(Electrode part) -10~180℃ (No freezing)
(Cable part) -10~180℃ (No freezing)

PFA coating for chemical liquid (reference + measurement + ground 3 electrode integrated) Φ10

1,000mm

Capacitive level sensor/level meter CP1 series-Part Number-CP1-B1T-150-1000*N-A

CP1-B1T-150-1000*N-A

Available upon quote

150mm

Electrode body: SUS304
Electrode insulation part: PFA coating t=1.5

Maximum 196KPa or less
(If the fitting seal pressure resistance you use is less than this, it depends on the fitting seal pressure resistance.)

Conductive liquids (including ultrapure water)

±200ppm/℃

70mm or more
*When the effective measurement length is less than 150mm, it is necessary to change the RMC-500 settings.

For connecting RMC-500

Approx. 60pF/m (when measuring conductive liquid)

(Electrode part) -10~180℃ (No freezing)
(Cable part) -10~180℃ (No freezing)

PFA coating for chemical liquid (reference + measurement + ground 3 electrode integrated) Φ10

1,000mm

Capacitive level sensor/level meter CP1 series-Part Number-CP1-B1T-150-1500*N

CP1-B1T-150-1500*N

Available upon quote

150mm

Electrode body: SUS304
Electrode insulation part: PFA coating t=1.5

Maximum 196KPa or less
(If the fitting seal pressure resistance you use is less than this, it depends on the fitting seal pressure resistance.)

Conductive liquids (including ultrapure water)

±200ppm/℃

70mm or more
*When the effective measurement length is less than 150mm, it is necessary to change the RMC-500 settings.

For connecting RMC-410

Approx. 60pF/m (when measuring conductive liquid)

(Electrode part) -10~180℃ (No freezing)
(Cable part) -10~180℃ (No freezing)

PFA coating for chemical liquid (reference + measurement + ground 3 electrode integrated) Φ10

1,500mm

Capacitive level sensor/level meter CP1 series-Part Number-CP1-B1T-150-1500*N-A

CP1-B1T-150-1500*N-A

Available upon quote

150mm

Electrode body: SUS304
Electrode insulation part: PFA coating t=1.5

Maximum 196KPa or less
(If the fitting seal pressure resistance you use is less than this, it depends on the fitting seal pressure resistance.)

Conductive liquids (including ultrapure water)

±200ppm/℃

70mm or more
*When the effective measurement length is less than 150mm, it is necessary to change the RMC-500 settings.

For connecting RMC-500

Approx. 60pF/m (when measuring conductive liquid)

(Electrode part) -10~180℃ (No freezing)
(Cable part) -10~180℃ (No freezing)

PFA coating for chemical liquid (reference + measurement + ground 3 electrode integrated) Φ10

1,500mm

Capacitive level sensor/level meter CP1 series-Part Number-CP1-B1T-150-2000*N

CP1-B1T-150-2000*N

Available upon quote

150mm

Electrode body: SUS304
Electrode insulation part: PFA coating t=1.5

Maximum 196KPa or less
(If the fitting seal pressure resistance you use is less than this, it depends on the fitting seal pressure resistance.)

Conductive liquids (including ultrapure water)

±200ppm/℃

70mm or more
*When the effective measurement length is less than 150mm, it is necessary to change the RMC-500 settings.

For connecting RMC-410

Approx. 60pF/m (when measuring conductive liquid)

(Electrode part) -10~180℃ (No freezing)
(Cable part) -10~180℃ (No freezing)

PFA coating for chemical liquid (reference + measurement + ground 3 electrode integrated) Φ10

2,000mm

Capacitive level sensor/level meter CP1 series-Part Number-CP1-B1T-150-2000*N-A

CP1-B1T-150-2000*N-A

Available upon quote

150mm

Electrode body: SUS304
Electrode insulation part: PFA coating t=1.5

Maximum 196KPa or less
(If the fitting seal pressure resistance you use is less than this, it depends on the fitting seal pressure resistance.)

Conductive liquids (including ultrapure water)

±200ppm/℃

70mm or more
*When the effective measurement length is less than 150mm, it is necessary to change the RMC-500 settings.

For connecting RMC-500

Approx. 60pF/m (when measuring conductive liquid)

(Electrode part) -10~180℃ (No freezing)
(Cable part) -10~180℃ (No freezing)

PFA coating for chemical liquid (reference + measurement + ground 3 electrode integrated) Φ10

2,000mm

Capacitive level sensor/level meter CP1 series-Part Number-CP1-B1T-150-2500*N

CP1-B1T-150-2500*N

Available upon quote

150mm

Electrode body: SUS304
Electrode insulation part: PFA coating t=1.5

Maximum 196KPa or less
(If the fitting seal pressure resistance you use is less than this, it depends on the fitting seal pressure resistance.)

Conductive liquids (including ultrapure water)

±200ppm/℃

70mm or more
*When the effective measurement length is less than 150mm, it is necessary to change the RMC-500 settings.

For connecting RMC-410

Approx. 60pF/m (when measuring conductive liquid)

(Electrode part) -10~180℃ (No freezing)
(Cable part) -10~180℃ (No freezing)

PFA coating for chemical liquid (reference + measurement + ground 3 electrode integrated) Φ10

2,500mm

Capacitive level sensor/level meter CP1 series-Part Number-CP1-B1T-150-2500*N-A

CP1-B1T-150-2500*N-A

Available upon quote

150mm

Electrode body: SUS304
Electrode insulation part: PFA coating t=1.5

Maximum 196KPa or less
(If the fitting seal pressure resistance you use is less than this, it depends on the fitting seal pressure resistance.)

Conductive liquids (including ultrapure water)

±200ppm/℃

70mm or more
*When the effective measurement length is less than 150mm, it is necessary to change the RMC-500 settings.

For connecting RMC-500

Approx. 60pF/m (when measuring conductive liquid)

(Electrode part) -10~180℃ (No freezing)
(Cable part) -10~180℃ (No freezing)

PFA coating for chemical liquid (reference + measurement + ground 3 electrode integrated) Φ10

2,500mm

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Liquid Level Indicators Products

Other products of RKC INSTRUMENT

Reviews shown here are reviews of companies.


View more products of RKC INSTRUMENT

About Company Handling This Product

Response Rate

100.0%


Response Time

14.3hrs

Company Overview

RKC Instrument has been continually growing for over half a century and strives to be a solution provider of m...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree