All Categories
History
Response Rate
100.0%
Response Time
14.3hours
Relatively Fast Response
Product
Indicator for resin pressure sensor PG500Handling Company
RKC INSTRUMENTCategories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Power supply voltage (rated) | Power supply voltage | Dustproof and waterproof structure | Adaptive sensor | Communication function | Mass | Alarm output | Permissible ambient temperature | Display digits | Display update cycle | Withstand voltage | Insulation resistance | Inrush current | Power consumption | Operation when wire is disconnected | External dimensions | Basic type | Pressure sensor shunt resistance | Effect of ambient temperature | Factory settings | Input display | Input accuracy | Input method | Input impedance | Memory backup | Bottom hold | Peak hold | Sensor supply power | Sampling period | Analog output |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
PG500A4*N-N-NN |
Available upon quote |
AC100~240V / AC24V / DC24V |
AC100~240V |
IP66, NEMA4X (Front direction only when mounting on panel) |
Strain gauge type sensor |
No communication function |
Approximately 200g |
No alarm output |
-10~50℃ |
5 digits (most significant digit is -1 or 1) |
0.1~10.0 seconds |
Between measurement terminal and ground 1,500V DC for 1 minute |
Between measurement terminal and ground 500V DC 20MΩ or more |
12A or less |
10VA or less (at 240V) |
Upscale (downscale can be selected) |
48×96×60mm (width x length x depth) |
Standard specifications |
40.0~100.0% *When using pressure sensor with built-in resistance for sensitivity adjustment |
Input: ±0.006% of input span/℃ |
None |
3 points |
±0.1% of input span |
No-voltage contact input (OPEN: 500kΩ or more, CLOSE: 500Ω or less) |
1MΩ or more |
Data retained by FRAM (approximately 10 years) |
Retains the minimum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
Retains the maximum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
DC7.7V±3% DC30mA or less |
0.1 seconds |
No analog output function |
|
|
PG500A4*N-N-4N |
Available upon quote |
AC100~240V / AC24V / DC24V |
AC100~240V |
IP66, NEMA4X (Front direction only when mounting on panel) |
Strain gauge type sensor |
RS-422A |
Approximately 200g |
No alarm output |
-10~50℃ |
5 digits (most significant digit is -1 or 1) |
0.1~10.0 seconds |
Between measurement terminal and ground 1,500V DC for 1 minute |
Between measurement terminal and ground 500V DC 20MΩ or more |
12A or less |
10VA or less (at 240V) |
Upscale (downscale can be selected) |
48×96×60mm (width x length x depth) |
Standard specifications |
40.0~100.0% *When using pressure sensor with built-in resistance for sensitivity adjustment |
Input: ±0.006% of input span/℃ |
None |
3 points |
±0.1% of input span |
No-voltage contact input (OPEN: 500kΩ or more, CLOSE: 500Ω or less) |
1MΩ or more |
Data retained by FRAM (approximately 10 years) |
Retains the minimum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
Retains the maximum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
DC7.7V±3% DC30mA or less |
0.1 seconds |
No analog output function |
|
|
PG500A4*N-N-5N |
Available upon quote |
AC100~240V / AC24V / DC24V |
AC100~240V |
IP66, NEMA4X (Front direction only when mounting on panel) |
Strain gauge type sensor |
RS-485 |
Approximately 200g |
No alarm output |
-10~50℃ |
5 digits (most significant digit is -1 or 1) |
0.1~10.0 seconds |
Between measurement terminal and ground 1,500V DC for 1 minute |
Between measurement terminal and ground 500V DC 20MΩ or more |
12A or less |
10VA or less (at 240V) |
Upscale (downscale can be selected) |
48×96×60mm (width x length x depth) |
Standard specifications |
40.0~100.0% *When using pressure sensor with built-in resistance for sensitivity adjustment |
Input: ±0.006% of input span/℃ |
None |
3 points |
±0.1% of input span |
No-voltage contact input (OPEN: 500kΩ or more, CLOSE: 500Ω or less) |
1MΩ or more |
Data retained by FRAM (approximately 10 years) |
Retains the minimum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
Retains the maximum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
DC7.7V±3% DC30mA or less |
0.1 seconds |
No analog output function |
|
|
PG500A4*N-1-NN |
Available upon quote |
AC100~240V / AC24V / DC24V |
AC100~240V |
IP66, NEMA4X (Front direction only when mounting on panel) |
Strain gauge type sensor |
No communication function |
Approximately 200g |
No alarm output |
-10~50℃ |
5 digits (most significant digit is -1 or 1) |
0.1~10.0 seconds |
Between measurement terminal and ground 1,500V DC for 1 minute |
Between measurement terminal and ground 500V DC 20MΩ or more |
12A or less |
10VA or less (at 240V) |
Upscale (downscale can be selected) |
48×96×60mm (width x length x depth) |
Standard specifications |
40.0~100.0% *When using pressure sensor with built-in resistance for sensitivity adjustment |
Input: ±0.006% of input span/℃ |
None |
3 points |
±0.1% of input span |
No-voltage contact input (OPEN: 500kΩ or more, CLOSE: 500Ω or less) |
1MΩ or more |
Data retained by FRAM (approximately 10 years) |
Retains the minimum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
Retains the maximum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
DC7.7V±3% DC30mA or less |
0.1 seconds |
DC0~10mV |
|
|
PG500A4*N-1-4N |
Available upon quote |
AC100~240V / AC24V / DC24V |
AC100~240V |
IP66, NEMA4X (Front direction only when mounting on panel) |
Strain gauge type sensor |
RS-422A |
Approximately 200g |
No alarm output |
-10~50℃ |
5 digits (most significant digit is -1 or 1) |
0.1~10.0 seconds |
Between measurement terminal and ground 1,500V DC for 1 minute |
Between measurement terminal and ground 500V DC 20MΩ or more |
12A or less |
10VA or less (at 240V) |
Upscale (downscale can be selected) |
48×96×60mm (width x length x depth) |
Standard specifications |
40.0~100.0% *When using pressure sensor with built-in resistance for sensitivity adjustment |
Input: ±0.006% of input span/℃ |
None |
3 points |
±0.1% of input span |
No-voltage contact input (OPEN: 500kΩ or more, CLOSE: 500Ω or less) |
1MΩ or more |
Data retained by FRAM (approximately 10 years) |
Retains the minimum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
Retains the maximum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
DC7.7V±3% DC30mA or less |
0.1 seconds |
DC0~10mV |
|
|
PG500A4*N-1-5N |
Available upon quote |
AC100~240V / AC24V / DC24V |
AC100~240V |
IP66, NEMA4X (Front direction only when mounting on panel) |
Strain gauge type sensor |
RS-485 |
Approximately 200g |
No alarm output |
-10~50℃ |
5 digits (most significant digit is -1 or 1) |
0.1~10.0 seconds |
Between measurement terminal and ground 1,500V DC for 1 minute |
Between measurement terminal and ground 500V DC 20MΩ or more |
12A or less |
10VA or less (at 240V) |
Upscale (downscale can be selected) |
48×96×60mm (width x length x depth) |
Standard specifications |
40.0~100.0% *When using pressure sensor with built-in resistance for sensitivity adjustment |
Input: ±0.006% of input span/℃ |
None |
3 points |
±0.1% of input span |
No-voltage contact input (OPEN: 500kΩ or more, CLOSE: 500Ω or less) |
1MΩ or more |
Data retained by FRAM (approximately 10 years) |
Retains the minimum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
Retains the maximum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
DC7.7V±3% DC30mA or less |
0.1 seconds |
DC0~10mV |
|
|
PG500A4*N-2-NN |
Available upon quote |
AC100~240V / AC24V / DC24V |
AC100~240V |
IP66, NEMA4X (Front direction only when mounting on panel) |
Strain gauge type sensor |
No communication function |
Approximately 200g |
No alarm output |
-10~50℃ |
5 digits (most significant digit is -1 or 1) |
0.1~10.0 seconds |
Between measurement terminal and ground 1,500V DC for 1 minute |
Between measurement terminal and ground 500V DC 20MΩ or more |
12A or less |
10VA or less (at 240V) |
Upscale (downscale can be selected) |
48×96×60mm (width x length x depth) |
Standard specifications |
40.0~100.0% *When using pressure sensor with built-in resistance for sensitivity adjustment |
Input: ±0.006% of input span/℃ |
None |
3 points |
±0.1% of input span |
No-voltage contact input (OPEN: 500kΩ or more, CLOSE: 500Ω or less) |
1MΩ or more |
Data retained by FRAM (approximately 10 years) |
Retains the minimum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
Retains the maximum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
DC7.7V±3% DC30mA or less |
0.1 seconds |
DC0~100mV |
|
|
PG500A4*N-2-4N |
Available upon quote |
AC100~240V / AC24V / DC24V |
AC100~240V |
IP66, NEMA4X (Front direction only when mounting on panel) |
Strain gauge type sensor |
RS-422A |
Approximately 200g |
No alarm output |
-10~50℃ |
5 digits (most significant digit is -1 or 1) |
0.1~10.0 seconds |
Between measurement terminal and ground 1,500V DC for 1 minute |
Between measurement terminal and ground 500V DC 20MΩ or more |
12A or less |
10VA or less (at 240V) |
Upscale (downscale can be selected) |
48×96×60mm (width x length x depth) |
Standard specifications |
40.0~100.0% *When using pressure sensor with built-in resistance for sensitivity adjustment |
Input: ±0.006% of input span/℃ |
None |
3 points |
±0.1% of input span |
No-voltage contact input (OPEN: 500kΩ or more, CLOSE: 500Ω or less) |
1MΩ or more |
Data retained by FRAM (approximately 10 years) |
Retains the minimum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
Retains the maximum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
DC7.7V±3% DC30mA or less |
0.1 seconds |
DC0~100mV |
|
|
PG500A4*N-2-5N |
Available upon quote |
AC100~240V / AC24V / DC24V |
AC100~240V |
IP66, NEMA4X (Front direction only when mounting on panel) |
Strain gauge type sensor |
RS-485 |
Approximately 200g |
No alarm output |
-10~50℃ |
5 digits (most significant digit is -1 or 1) |
0.1~10.0 seconds |
Between measurement terminal and ground 1,500V DC for 1 minute |
Between measurement terminal and ground 500V DC 20MΩ or more |
12A or less |
10VA or less (at 240V) |
Upscale (downscale can be selected) |
48×96×60mm (width x length x depth) |
Standard specifications |
40.0~100.0% *When using pressure sensor with built-in resistance for sensitivity adjustment |
Input: ±0.006% of input span/℃ |
None |
3 points |
±0.1% of input span |
No-voltage contact input (OPEN: 500kΩ or more, CLOSE: 500Ω or less) |
1MΩ or more |
Data retained by FRAM (approximately 10 years) |
Retains the minimum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
Retains the maximum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
DC7.7V±3% DC30mA or less |
0.1 seconds |
DC0~100mV |
|
|
PG500A4*N-3-NN |
Available upon quote |
AC100~240V / AC24V / DC24V |
AC100~240V |
IP66, NEMA4X (Front direction only when mounting on panel) |
Strain gauge type sensor |
No communication function |
Approximately 200g |
No alarm output |
-10~50℃ |
5 digits (most significant digit is -1 or 1) |
0.1~10.0 seconds |
Between measurement terminal and ground 1,500V DC for 1 minute |
Between measurement terminal and ground 500V DC 20MΩ or more |
12A or less |
10VA or less (at 240V) |
Upscale (downscale can be selected) |
48×96×60mm (width x length x depth) |
Standard specifications |
40.0~100.0% *When using pressure sensor with built-in resistance for sensitivity adjustment |
Input: ±0.006% of input span/℃ |
None |
3 points |
±0.1% of input span |
No-voltage contact input (OPEN: 500kΩ or more, CLOSE: 500Ω or less) |
1MΩ or more |
Data retained by FRAM (approximately 10 years) |
Retains the minimum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
Retains the maximum measured value *The retained data will be initialized by turning off the instrument power or performing a reset operation. |
DC7.7V±3% DC30mA or less |
0.1 seconds |
DC0~1V |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
