All Categories

History

  1. Metoree
  2. Machining / Machine Tools
  3. Rolling Machines
  4. Thread rolling head axial head for lathe A-12 (Yamada Machine Tool Co., Ltd.)
Thread rolling head axial head for lathe A-12-A-12
Thread rolling head axial head for lathe A-12-Yamada Machine Tool Co., Ltd.

Thread rolling head axial head for lathe A-12
Yamada Machine Tool Co., Ltd.

About This Product

■What is a thread rolling head?

The thread rolling head usually involves three rolls and enters from the end face of the material from the axial direction to roll the thread. Since it is a step rolling method that rolls one pile at a time from the tip, it places less stress on the machine and workpiece. No matter how many revolutions there are, each revolution advances by a pitch. Since the roll moves in the axial direction no matter the length, a feature of the axial head is that the thread length can be set freely. There is an F-type head (used for lathes, etc.) that is used for rotating workpieces, and a G-type head (used for MC, etc.) that can rotate the head.

■Materials that can be rolled

・Materials with an elongation rate of 5% or more and a maximum tension of 1700N/mm2 ・Steel, stainless steel, casting, brass, copper, aluminum, titanium, etc. ・Materials with HRC20 or less are suitable for rolling, and the life of the roll will be longer. - Rolling of materials with an elongation rate of less than 5% or hardness exceeding HRC30, such as cast iron or other highly hard materials, is extremely difficult.

■Lubrication and cooling

Please use cutting oil/coolant during machining to extend the life of the roll. Also, apply cutting oil/coolant to the workpiece to remove chips from the previous process. Conventional cutting oils and coolants can be used for thread rolling, for example soluble oils (possibly with additives) in a ratio of 10 to 20:1. Pure cutting fluids with low viscosity are also used for thread rolling. Additives can significantly extend roll life.

■Clutch function

The axial head has a clutch function, and the roll releases the workpiece after thread rolling is completed. This allows the head to return quickly without coming into contact with the rolled threads. The method to return the opened clutch depends on the usage situation.

  • Product

    Thread rolling head axial head for lathe A-12

Share this product


310+ people viewing

Last viewed: 2 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Thread rolling head axial head for lathe A-12

Image Part Number Price (excluding tax)
Thread rolling head axial head for lathe A-12-Part Number-A-12

A-12

Available upon quote

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Micro 3 die rolling machine Micro Roll-Mishima Shoji Ltd.

Micro 3 die rolling machine Micro Roll

Mishima Shoji Ltd.

410+ people viewing

Rolling Machines
Counter flow rolling machine CT-400-N.H.K. Builder Co., Ltd.

Counter flow rolling machine CT-400

N.H.K. Builder Co., Ltd.

570+ people viewing

Rolling Machines

2 models listed

Counterflow rolling machine CT-400E-N.H.K. Builder Co., Ltd.

Counterflow rolling machine CT-400E

N.H.K. Builder Co., Ltd.

440+ people viewing

Rolling Machines

2 models listed

Counter flow rolling machine CT-600-N.H.K. Builder Co., Ltd.

Counter flow rolling machine CT-600

N.H.K. Builder Co., Ltd.

560+ people viewing

Last viewed: 2 hours ago

Rolling Machines

2 models listed

Counter flow rolling machine CT-600E-N.H.K. Builder Co., Ltd.

Counter flow rolling machine CT-600E

N.H.K. Builder Co., Ltd.

350+ people viewing

Rolling Machines

2 models listed

Counter flow rolling machine PCT-1000-N.H.K. Builder Co., Ltd.

Counter flow rolling machine PCT-1000

N.H.K. Builder Co., Ltd.

410+ people viewing

Last viewed: 6 hours ago

Rolling Machines

2 models listed

Rolling drive type using AC servo motor + ball screw. Counter flow rolling machine PCT-1000E-N.H.K. Builder Co., Ltd.

Rolling drive type using AC servo motor + ball screw. Counter flow rolling machine PCT-1000E

N.H.K. Builder Co., Ltd.

380+ people viewing

Rolling Machines

2 models listed

The definitive version of the 36-inch rolling machine. PCT-1000 has further evolved. Counter flow rolling machine PCT-1000hbc-N.H.K. Builder Co., Ltd.

The definitive version of the 36-inch rolling machine. PCT-1000 has further evolved. Counter flow rolling machine PCT-1000hbc

N.H.K. Builder Co., Ltd.

360+ people viewing

Last viewed: 5 hours ago

Rolling Machines

2 models listed

Even higher rigidity and precision. Aiming for the fastest and strongest rolling machine. Counter flow rolling machine CT-400hbc-N.H.K. Builder Co., Ltd.

Even higher rigidity and precision. Aiming for the fastest and strongest rolling machine. Counter flow rolling machine CT-400hbc

N.H.K. Builder Co., Ltd.

360+ people viewing

Last viewed: 2 hours ago

Rolling Machines

2 models listed

Knurling with less interference QUICK Rolling knurling tool Rolling knurling for shoulder machining F712-20U,25U-Yamada Machine Tool Co., Ltd.

Knurling with less interference QUICK Rolling knurling tool Rolling knurling for shoulder machining F712-20U,25U

Yamada Machine Tool Co., Ltd.

4.5

160+ people viewing

Response time: 11.39 hours

Rolling Machines

2 models listed

Knurling with less interference QUICK Rolling knurling tool Rolling knurling for automatic lathe shoulder machining F712-08U,10U,12U-LD-Yamada Machine Tool Co., Ltd.

Knurling with less interference QUICK Rolling knurling tool Rolling knurling for automatic lathe shoulder machining F712-08U,10U,12U-LD

Yamada Machine Tool Co., Ltd.

4.5

110+ people viewing

Response time: 11.39 hours

Rolling Machines

3 models listed

Knurling with less interference QUICK Rolling knurling tool 3-piece rolling knurling F791-Yamada Machine Tool Co., Ltd.

Knurling with less interference QUICK Rolling knurling tool 3-piece rolling knurling F791

Yamada Machine Tool Co., Ltd.

4.5

140+ people viewing

Response time: 11.39 hours

Rolling Machines

2 models listed

See More Rolling Machines Products

Other products of Yamada Machine Tool Co., Ltd.

Reviews shown here are reviews of companies.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-N

Yamada Machine Tool Co., Ltd.

4.5

130+ people viewing

Response time: 11.39 hours

Toolholders

8 models listed

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-NB-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-NB

Yamada Machine Tool Co., Ltd.

4.5

150+ people viewing

Response time: 11.39 hours

Cutting Tools

4 models listed

Low load, high quality knurling QUICK Cutting knurling tool Cutting knurling for flat grain C601-16,20,25-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Cutting knurling for flat grain C601-16,20,25-N

Yamada Machine Tool Co., Ltd.

4.5

190+ people viewing

Last viewed: 11 hours ago

Response time: 11.39 hours

Cutting Tools

3 models listed

Low load, high quality knurling QUICK cutting knurling tool Flat knurling for machining large diameter workpieces C621-27-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK cutting knurling tool Flat knurling for machining large diameter workpieces C621-27

Yamada Machine Tool Co., Ltd.

4.5

330+ people viewing

Response time: 11.39 hours

Cutting Tools
Low load, high quality knurling QUICK Cutting knurling tool Knurling for cutting cross stitch C602-10,12,16-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Knurling for cutting cross stitch C602-10,12,16-N

Yamada Machine Tool Co., Ltd.

4.5

130+ people viewing

Response time: 11.39 hours

Cutting Tools

3 models listed

Low load, high quality knurling QUICK cutting knurling tool Cross-grain knurling C602-10,12,16-NB-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK cutting knurling tool Cross-grain knurling C602-10,12,16-NB

Yamada Machine Tool Co., Ltd.

4.5

130+ people viewing

Last viewed: 19 hours ago

Response time: 11.39 hours

Cutting Tools

3 models listed

Low load, high quality knurling QUICK Cutting knurling tool Lathe cross-grain knurling C602-16,20,25-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Lathe cross-grain knurling C602-16,20,25-N

Yamada Machine Tool Co., Ltd.

4.5

160+ people viewing

Last viewed: 17 hours ago

Response time: 11.39 hours

Cutting Tools

3 models listed

High Tensile Aluminum Coolant & Air Hose Piranha Clamp Piranha Cooling Line-Yamada Machine Tool Co., Ltd.

High Tensile Aluminum Coolant & Air Hose Piranha Clamp Piranha Cooling Line

Yamada Machine Tool Co., Ltd.

4.5

70+ people viewing

Last viewed: 9 hours ago

Response time: 11.39 hours

Air Blow Nozzles

795 models listed

Low load, high quality knurling QUICK cutting knurling tool Cross-grain knurling for large workpieces C622-40R,57R-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK cutting knurling tool Cross-grain knurling for large workpieces C622-40R,57R

Yamada Machine Tool Co., Ltd.

4.5

130+ people viewing

Last viewed: 13 hours ago

Response time: 11.39 hours

Rotary Tools

4 models listed

Low load, high quality knurling QUICK cutting knurling tool 3-piece cutting knurling C693-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK cutting knurling tool 3-piece cutting knurling C693

Yamada Machine Tool Co., Ltd.

4.5

150+ people viewing

Response time: 11.39 hours

Cutting Tools

2 models listed

Knurling with less interference QUICK Rolling knurling tool Small rolling knurling for flat grain F701-10,12,16-Yamada Machine Tool Co., Ltd.

Knurling with less interference QUICK Rolling knurling tool Small rolling knurling for flat grain F701-10,12,16

Yamada Machine Tool Co., Ltd.

4.5

90+ people viewing

Response time: 11.39 hours

6 models listed

Knurling with less interference QUICK Rolling knurling tool Rolling knurling compatible with all patterns F712-10,12,16-Yamada Machine Tool Co., Ltd.

Knurling with less interference QUICK Rolling knurling tool Rolling knurling compatible with all patterns F712-10,12,16

Yamada Machine Tool Co., Ltd.

4.5

130+ people viewing

Response time: 11.39 hours

Rolling Machines

3 models listed


View more products of Yamada Machine Tool Co., Ltd.

About Company Handling This Product

Yamada Machine Tool Co., Ltd.

  • Japan

Related search keywords

Rolling Machines
Rolling Machines　Yamada Machine Tool Co., Ltd.
Yamada Machine Tool Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree