All Categories

History

Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2-HK-2
Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2-Automatic door opening
Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2-Unlocking the locker
Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2-Suspension of facility equipment
Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2-Announcement
Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2-Hotron Co., Ltd.

Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2
Hotron Co., Ltd.

Hotron Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

45.3hours


About This Product

■Suitable for a wide range of applications such as automatic doors, factory equipment, and broadcast equipment.

・Open: Automatically open doors and locked lockers ・Stop: Stop the operation of equipment and send a signal to the control room ・Announcement: Automatically starts announcing evacuation guidance, etc.

■Features

・The power supply is DC12-24V, so it can be used in a wide range of situations. ・There are 4 levels of detection sensitivity (GAL), which can be selected according to your desired application. ・It is compact and easy to install, and the reset switch makes recovery easy. ・You can select from 8 different retention times for the detection output (automatic recovery except for infinity). <Introduction example>

■Case 1 Elderly welfare facility

[Issues before implementation] As the facility is frequented by many elderly people, disaster preparedness was being considered to ensure smooth and prompt evacuation of users in the event of an earthquake. [Results after introduction] Since the front entrance was an automatic door, we installed the HK-2. When an earthquake occurs, automatic doors can be opened to secure an evacuation route. It is easy to install even with existing automatic doors, and the earthquake countermeasures provide peace of mind for both users and staff.

■Case 2 Auto parts factory

[Issues before implementation] In conjunction with maintenance and replacement of factory equipment control equipment, the company considered updating the existing seismic sensing equipment as well, but since production had already ended, they were looking for a replacement. [Results after introduction] HK-2 has the ability to emergency stop equipment in the event of an earthquake, and is functionally the same as the existing equipment, so it was introduced as a replacement. Since it was compact in size, it was possible to fit it into the existing control panel.

■Case 3 Apartment

[Issues before implementation] I wanted to secure an evacuation route by opening automatic doors for a certain period of time in the event of an earthquake, so I was looking for a seismic device that could be linked to automatic doors. [Results after introduction] After the earthquake subsides, HK-2 has a function to automatically recover after a certain period of time, so there is no need for people to go to the site.

■Case 4 Automatic clinic door opening

[Issues before implementation] Since the clinic is visited by many children, I was worried that if an earthquake were to occur, people would panic near the exit. When considering whether there were any measures that could be taken to prepare for the occurrence of an earthquake, the company was looking for a seismic sensor that could be linked to automatic doors since the entrances and exits are automatic doors. [Results after introduction] With the introduction of the HK-2, it has become possible to secure an evacuation route by opening automatic doors in an emergency. Additionally, in the unlikely event that an earthquake occurs, the automatic doors will open for a certain period of time, eliminating the fear of being trapped inside the hospital.

■Case 5 Public facilities

[Issues before implementation] In the event of an earthquake, it was necessary to detect the shaking and automatically close the water valves to prevent water from leaking inside the facility. Additionally, the locations where water valves are installed are not places where people would normally be stationed, so after the earthquake subsided, personnel had to go to the site to restore the water. [Results after introduction] With the introduction of HK-2, we were able to take measures against water leaks, and since HK-2 has a function that automatically restores water after a certain period of time, there is no longer a need for people to go to the site for restoration work.

■Case 6 University research institute

[Issues before implementation] Many of the equipment used in the research institute are special equipment that is very expensive, and if the equipment were to malfunction due to an earthquake, there was a risk that it would take a significant amount of time and money to repair. [Results after introduction] Each piece of equipment is expensive and special equipment, so if it gets damaged, it will take a lot of time and money to repair it. By introducing HK-2, we were able to prevent risks and prepare for earthquakes.

  • Product

    Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2

Share this product


120+ people viewing

Last viewed: 5 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

5 Models of Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply Mass Power consumption Detection direction Sensitivity setting Response time External warning LED output current External warning LED output voltage External warning LED External reset input Operation display LED Output contact Output holding time Operating temperature range Fail safe function Accessories
Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2-Part Number-HK-2

HK-2

Available upon quote

DC12~24V±10

Approximately 90g

At DC12V: 40mA or less (external LED not connected)
At DC24V: 25mA or less (external LED not connected)

3 axes, omnidirectional

80Gal / 100Gal / 200Gal / 300Gal (Dip switch setting)

Approximately 1 second

50mA Max *Only LED can be connected, incandescent bulb type cannot be connected

6V

Non-detection: Off, Detection: Fast blinking, Error: Slow blinking

Yes *Only compatible with micro load current type/momentary type switches

Non-detection: On, Detection: Fast blinking, Error: Slow blinking

No-voltage relay contact 1c, DC30V 1A (resistive load)

2 seconds / 10 seconds / 30 seconds / 60 seconds / 5 minutes / 30 minutes / 60 minutes / ∞ (dip switch setting)

-20 ~ +60℃ (no condensation)

Yes (dip switch setting)

Mounting screws (2 pcs), instruction manual

Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2-Part Number-Automatic door opening

Automatic door opening

Available upon quote - - - - - - - - - - - - - - - -
Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2-Part Number-Unlocking the locker

Unlocking the locker

Available upon quote - - - - - - - - - - - - - - - -
Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2-Part Number-Suspension of facility equipment

Suspension of facility equipment

Available upon quote - - - - - - - - - - - - - - - -
Detects earthquakes equivalent to seismic intensity 5 (Gal setting) | Earthquake sensing device HK-2-Part Number-Announcement

Announcement

Available upon quote - - - - - - - - - - - - - - - -

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Seismic Sensor Products

Other products of Hotron Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Hotron Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

45.3hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree