All Categories

History

Fixed pin J-shape for weed control sheet-1,000 pieces set
Fixed pin J-shape for weed control sheet-Midoris Co., Ltd.

Fixed pin J-shape for weed control sheet
Midoris Co., Ltd.

Midoris Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

28.0hours

Relatively Fast Response


About This Product

■Midoris original J type pin

When planting crapia, by using a planting sheet light, you can not only reduce the overall cost, but also cover it neatly. At this time, what you need is an anchor (holding pin) to hold the sheet tightly against the ground. This may come as a surprise to those who are not familiar with it, but since a large number of seat presser pins are required, purchasing them at a home center can result in unexpected expenses. Therefore, Midoris has created an original anchor with an improved shape that is inexpensive and less likely to damage.

■Thoughtfully made Japanese J-pin anchor

Based on years of know-how, the total length is 15cm, which is the size that allows it to be firmly and properly inserted into the ground. The J-shape is harder to bend than the U-shape and can be stabbed into the ground more easily. As for the quality, since they are manufactured in Japan, they undergo strict inspection, so you can rest assured that there is no need to worry about uneven lengths or crushed tips. Each box is suitable for 80-100 square meters of land. If you are using planting sheets for an area of ​​100 square meters or more, we offer a set of 1,000 sheets at a great value.

■Approximate number of pins to drive

・Top long side: 50cm intervals ・Long side bottom: 50cm intervals ・Central part: 100cm intervals ・Both short sides: 25cm apart

■ (Example) When driving a presser pin into a sheet 1m wide x 10m long

・Top long side: 1,000cm ÷ 50cm = 20 pieces ・Long side bottom: 1,000cm ÷ 50cm = 20 pieces ・Central part: 1,000cm ÷ 100cm = 10 pieces ・Both short sides: 200cm ÷ 25cm = 8 pieces Total = 58 pieces

■One point advice

To prevent the sheet from flipping up due to the wind, we recommend that you press extra pins into both ends of the sheet. If the land where you are installing is uneven, please use 8 pieces per square meter as a guide. Since it is made of iron, as it rusts, the friction increases and it becomes difficult to remove it from the seat. Usually, they are U-shaped, but because each pin sticks into the ground in two places, the pin often bends when it hits a stone, etc. and misses the shot. Midoris' original J-shape is shorter on one side to reduce misses.

  • Product

    Fixed pin J-shape for weed control sheet

Share this product


160+ people viewing

Last viewed: 11 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

7 Models of Fixed pin J-shape for weed control sheet

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Length Thickness 1 box
Fixed pin J-shape for weed control sheet-Part Number-1,000 pieces set

1,000 pieces set

Available upon quote

5cm, 15cm made of iron

2.8mm

500 pieces x 2

Fixed pin J-shape for weed control sheet-Part Number-500 pieces set

500 pieces set

Available upon quote

5cm, 15cm made of iron

2.8mm

500 bottles (approximately 18.2 yen per bottle)

Fixed pin J-shape for weed control sheet-Part Number-2,000 pieces set

2,000 pieces set

Available upon quote

5cm, 15cm made of iron

2.8mm

500 pieces x 4

Fixed pin J-shape for weed control sheet-Part Number-50 pieces set

50 pieces set

Available upon quote

5cm, 15cm made of iron

2.8mm

Set of 50 pieces (approximately 33.6 yen per piece)

Fixed pin J-shape for weed control sheet-Part Number-200 pieces set

200 pieces set

Available upon quote

5cm, 15cm made of iron

2.8mm

200 pieces set (24.9 yen per piece)

Fixed pin J-shape for weed control sheet-Part Number-100 pieces set

100 pieces set

Available upon quote

5cm, 15cm made of iron

2.8mm

100 pieces set (26.8 yen per piece)

Fixed pin J-shape for weed control sheet-Part Number-10 pieces set

10 pieces set

Available upon quote

5cm, 15cm made of iron

2.8mm

Set of 10 pieces (approximately 59.6 yen per piece)

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Landscaping Materials Products

Other products of Midoris Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Midoris Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

28.0hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree