All Categories

History

Linear programmable AC power supply APS-7000 series APS-7200-APS-7200
Linear programmable AC power supply APS-7000 series APS-7200-TEXIO TECHNOLOGY CORPORATION

Linear programmable AC power supply APS-7000 series APS-7200
TEXIO TECHNOLOGY CORPORATION

TEXIO TECHNOLOGY CORPORATION's Response Status

Response Rate

100.0%

Response Time

26.1hours

Relatively Fast Response


About This Product

■Low-noise, high-performance linear programmable AC power supply

The APS-7000 series is a highly functional linear programmable AC power supply that supports a variety of AC waveforms, including 9 types of measurement functions, abundant test functions, and arbitrary waveform mode. It supports high-performance measurement functions and can display measurements similar to an AC power meter. The APS-7050/7100 has a wide current measurement range of 2.00mA to 17.50A (4 ranges), and can measure minute currents (minimum resolution 0.01mA), allowing you to directly measure the power consumption of the device in standby mode (APS-7050/7100). -7200/7300: 0.2A to 35.00A (2 ranges), minimum resolution 0.001A). It is possible to perform simulation, sequence, and program control to test abnormal voltage, frequency, phase, etc., which is useful for verifying the operation of electrical products, and output voltage surge/dip waveforms with one key. Arbitrary waveform (ARB) mode is useful for simulating abnormal input power waveform tests. In addition, by setting the power ON output, it is possible to turn on the power after the power is turned on. Features

■Output range

The APS-7000 series has a frequency range of 45.0 to 500.0Hz, with APS-7050 up to 500VA, APS-7100 up to 1,000VA, APS-7200 up to 2,000VA, and APS-7300 up to 3,000VA. Option APS-003 supports a maximum voltage of 600Vrms, and option APS-004 supports a frequency range of up to 999.9Hz.

■Sequence mode

It has 10 sets of sequence modes. Each sequence has a maximum of 255 steps. Each step can be set in time from 0.01 to 999.99 seconds. You can create complex waveforms by combining multiple steps.

■Program mode

There are 10 program modes and each program set has 50 memories. Each scale consists of 9 steps. Each program executes according to a memory sequence, a self-defined loop, or a specified stop step. Program mode allows you to set the ceiling and floor limits for generating PASS/FAIL results after performing a measurement. You can also view the test results or final results for each test step.

  • Product

    Linear programmable AC power supply APS-7000 series APS-7200

Share this product


70+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Linear programmable AC power supply APS-7000 series APS-7200

Image Part Number Price (excluding tax) Electric power Weight Setting range Voltage Accuracy Setting range Voltage Setting range Frequency Setting range Output on/off phase External dimensions Synchronous signal output Operating range Output voltage Output frequency Signal output Protection function Storage range Preset memory Display Trigger Out Trigger In AC reverse output current AC output load fluctuation AC output maximum current (rms) AC output maximum current (peak) AC output response time AC output input fluctuation AC output AC input
Linear programmable AC power supply APS-7000 series APS-7200-Part Number-APS-7200

APS-7200

Available upon quote

2,000VA

90kg

± (0.5% of setting+2counts)

Range: 0~155Vrms, 0~310Vrms, Auto
Resolution: 0.01V at 0.00~99.99Vrms/0.1V at 100.0~310.0Vrms

Range: 45~500Hz
Resolution: 0.01Hz at 45.00~1,000Hz/0.1Hz at 100.0~500.0Hz
Accuracy: ±0.02% of Setting

Range: 0~359°, resolution: 1°
Accuracy: ±1° (45~65Hz)

W430×H312×D650mm

Output Signal 10V
BNC Type

Temperature: 0~+40℃
Humidity: 20~80%RH (no condensation)

0~155Vrms/0~310.0Vrms

45.00~500.0Hz

Pass, Fail, Test-in Process
Trigger in, Trigger out, OUT ON/OFF

Overcurrent, overpower
Overheating (output off due to alarm)

Temperature -10~+70℃
Humidity: 80%RH or less (no condensation)

10 (0~9)

4.3 inches
480 (RGB) ×272

Maximum L level: 0.8V, minimum H level: 2V
Maximum source current: 8mA.

Maximum L level: 0.8V, minimum H level: 2.0V
Maximum sink current: 8mA.

30% (maximum output current RMS, continuous)
100% (maximum output current RMS, less than 3 minutes)

0.5%
(% of full scale)

0~155Vrms: 16.8A
0~310Vrms: 8.4A

0~155Vrms: 67.2A
0~310Vrms: 33.6A

<100µS

0.1%
(% of full scale)

Phase: Single phase, two wires (1P2W)
Total harmonic distortion (THD): ≤0.5% at 45~500Hz (resistive load)
Crest factor: ≥4

Phase: single phase, voltage: 230Vac±10%
Frequency: 47~63Hz, maximum current: 32A
Power consumption: 7.2kVA or less, power factor: 0.7Typ.

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More AC Power Supplies Products

Other products of TEXIO TECHNOLOGY CORPORATION

Reviews shown here are reviews of companies.


View more products of TEXIO TECHNOLOGY CORPORATION

About Company Handling This Product

Response Rate

100.0%


Response Time

26.1hrs

Company Overview

TEXIO TECHNOLOGY CORPORATION has been in operation in Japan for over 60 years. TEXIO specializes in custom ord...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree