DRS2 series equipped with compact electric cylinder αSTEP AZ series
ORIM VEXTA
About This Product
【feature】
・ Fine positioning
・ Stroke 50mm
・ Maximum speed 200mm/s
・ Maximum amount of transportation level 50kg vertical 50kg
・ Maximum thrust 500N
・ Repeated positioning accuracy ± 0.003 mm Main characteristics of compact electric actuators
・ Structure in which stepping motors and ball screws are integrated
Integrated hollow rotors and ball screw nuts.
Since no connection part is required, the effects of back lashes due to combinations such as coupling rigidity are reduced, and highly accurate positioning can be realized.
Reduce the time to start the device
Collect direct motion mechanism in a compact body
・ Since the parts you have made are unnecessary, you can shorten the time for equipment design and parts selection.
・ Reduce the time required for assembly and mounting accuracy adjustment, which leads to increased production efficiency.
・ Pressing power and time can be changed freely
Note: Do not operate on a cylinder with a 1mm DR series. The TLC signal is output before the pressing operation is completed, and the pressing operation may not be completed properly.
The DRS2 series can be easily migrated to pressing and operation after positioning operation is completed. You can also change the pressing force and time freely.
・ Since you can set the pressing force and the pressing time for each driving data No., you can easily change the data No.
・ It can be used separately at the stage where the position is reduced so that the position does not shift, and at the stage of slowly pressing in, and when the force is raised in a short time.
・ You can press at low speed
Approach for work at high speed. You can slow down just before hitting and press at low speed.
Since there is almost no impact when pressed, there is no need for a cushion mechanism for shock absorption.
Because it can be approached at high speed until just before the pressing, it will reduce the tact time of the device.
Features of DRS2 series
Mounting angle dimensions 42mm, 60mm compact electric cylinder.
The AZ series is equipped with a batteryless absolute sensor.
Two types of driving ball screws
Driving ball screw type Repeated positioning accuracy maximum moving amount Precision ball screw ± 0.003mm0.001mm converted ball screw ± 0.01mm
・ Realizes high -size transport quality and high -speed operation
・ Equipped with αSTEP motor
The motor of the drive portion is a stepping motor motor that performs proprietary control that hybrids the advantages of "open loop control" and "closed loop control". Always monitor the position of the motor and automatically switch two controls according to the situation.
Normally, the open loop control is driven in sync to the command, demonstrating high responsiveness. In the case of overload, the operation is continued while correcting the motor position by close -drooping control.
A motor that balances ease of use and reliability. Since it is equipped with a batteryless mechanical absolute absolute encoder, it is possible to position external sensors such as origin sensors and limit sensors, but can be positioned.
-
-
Product
DRS2 series equipped with compact electric cylinder αSTEP AZ series