Fully automatic melt flow test machine Meltfloori D-M
Toyo Seiki Seisaku-sho, Ltd.
About This Product
It is a completely automated model of samples, measurements, and cleaning.
It contributes to fully automation from sampling to cleaning, to improve labor, efficiency, and reproducibility of measurement work.
･ Continuous tests for 10 sample cups (40 options) are possible
･ Compact ･ Space -saving desktop model ( * height 1060mm)
･ A wealth of options can be selected (A automatic measurement A, electrical heat drying device, dry air drying unit, load change mechanism, etc.)
Meltfloor is a full automated compact meltflate test machine.
In addition to the B -Law measurement (moving distance measurement method), the A Law measurement (mass measurement method) can be used optionally.
The operator's burden is greatly reduced by automating the operation work of MFR and MVR measurement.
Since thermoplastic resin can be mass -produced inexpensive, it is used for all products such as home appliances, automotive parts, and household goods, and is indispensable in our lives.
There are methods such as injection molding, extruding molding, and blow molding as a method of processing thermoplastic resin, but in any molding method, the liquidity of the molten resin is an important indicator.
Meltflate is widely used as an indicator of molten resin fluid, and is standardized in ISO, JIS, ASTM, and ASTM has slightly different terms and regulations for ISO and JIS, but the measurement principle is the same.
Generally, the larger the meltflow rate, the better the fluidity, and the smaller it is, the worse the liquidity. In addition, when the same type of resin is measured, the larger the value, the higher the molecular weight and the higher the molecular weight.
However, since the measurement is basically almost static, the shearing speed generated in the resin under measured is very small in terms of the shear speed at the time of injection molding, etc., and may not be correlated with the actual processing. Therefore, it is mainly used in quality control of materials.
-
Product
Fully automatic melt flow test machine Meltfloori D-M
-
Handling Company
Toyo Seiki Seisaku-sho, Ltd.
1 Models of Fully automatic melt flow test machine Meltfloori D-M
| Product Image | Part Number | Price (excluding tax) | Air source | Data processing device | Dimensions (body) | Dimensions (data processing device) | Furnace cylinder cleaning | Loading up and down | Number of sample cups (options) | Number of sample cups (standard) | Olifice Dai cleaning | Piston cleaning | Presolution of residual resin | Sample introduction | Test piece storage number | Test temperature | mass | power supply | size |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
D-M |
Available upon quote | 0.6MPa | Standard attached (PC, dedicated software) | W1200 x D750 x H2000mm | W600 x D700 x H1600mm | Automatic | Automatic | 40 | Ten | Automatic | Automatic | Automatic | Automatic | Max. 300 (50 x 6 cassette) | Max. 300 ° C | Approximately 320kg | Single phase, AC100V, 50/60Hz, 15A | W900 x D700 x H1060mm |
Other products of Toyo Seiki Seisaku-sho, Ltd.
View more products of Toyo Seiki Seisaku-sho, Ltd.
