Vehicle detection sensor HM-R1 for merging warnings and exit warnings in parking lots of factories and distribution warehouses
Hotron Co., Ltd.
About This Product
Wall-mounted/directional radar sensor that can be used outdoors
■A must-see for those who are having trouble in such a field.
・I want to determine direction with one sensor.
・I want to easily install it without burying it.
・Since it is outdoors, it cannot be installed on the ceiling.
・I want to avoid the hassle of installing a photoelectric sensor light receiving part.
- Want to prevent collisions between vehicles.
・I want to alert passersby when leaving their cars.
■With HM-R1, you can simply mount one unit on the wall even outdoors.
・For photoelectric sensors: To determine direction, two emitters and two receivers are required, totaling four units.
・For loop coils: Two coils must be buried in order to determine the direction.
・HM-R1 is a wall-mountable orientation sensor that can be used outdoors. Rain is a weak point of radar, so by attaching a cover, the effect of rain on the irradiation area is reduced and it can be used outdoors.
■Preventing troubles such as car collisions and collisions between pedestrians and cars
It detects approaching vehicles in parking lots of distribution warehouses and commercial facilities, and alerts you with revolving lights and buzzers.
■Can also be used as a sensor for warning when leaving the warehouse
It detects vehicles exiting the parking lot at vehicle entrances and exits facing sidewalks and roads, and alerts passersby with revolving lights and buzzers.
-
Product
Vehicle detection sensor HM-R1 for merging warnings and exit warnings in parking lots of factories and distribution warehouses
-
Handling Company
Hotron Co., Ltd.
-
Categories
1 Models of Vehicle detection sensor HM-R1 for merging warnings and exit warnings in parking lots of factories and distribution warehouses
| Product Image | Part Number | Price (excluding tax) | Accessories | Angle adjustment | Current consumption | Detectable vehicle speed | Detection distance | Detection method | Mass | Mounting height | Operating temperature range | Operation display LED | Output contact | Output holding time | Power supply | Protection class | Transmission frequency | Usage environment | Wiring cord diameter |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HM-R1 |
Available upon quote | Instruction manual, pan head screws (2 pcs), tapping screws (2 pcs), rubber washers (2 pcs), caps (2 pcs) |
Vertical swing angle: Up 15° ~ Down 15° (5° steps) Left/right swing angle: 50° left ~ 50° right (10° steps) |
At 12V DC: 50mA or less, at 24V DC: 30mA or less | Maximum 30km/h (depending on installation environment) | See detection range | Doppler method (motion detection) | Approximately 280g | 0.5~1.5m | -20~+60℃ |
During initialization: blinking green When power is on standby: Lights up in green When detected: Lights up in red When switching the dip switch: Orange blinks rapidly (0.5 seconds immediately after switching) |
No-voltage relay contact 1a (no photomos relay polarity) DC48V 0.3A (resistive load) |
Approximately 0.5 seconds | DC 12~24V±10% | IP55 (when caulking material is applied to the wiring hole) | 24.15GHz | Outdoor and indoor | Maximum Φ9.1 (CPEV0.9 3P equivalent) |
Customers who viewed this product also viewed
Other products of Hotron Co., Ltd.
![[Non-contact] Optical touch sensor with built-in eyes HA-T520-Hotron Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3002208202404281.png)
![[Non-contact] Light beam touch sensor invisible installation type HA-T401-Hotron Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3002208202404282.png)
View more products of Hotron Co., Ltd.
About Company Handling This Product
- Japan