All Categories

History

Vehicle count sensor for air space management | Infrared sensor CCS2-CCS2
Vehicle count sensor for air space management | Infrared sensor CCS2-Image of full-space management of multi-story parking lot
Vehicle count sensor for air space management | Infrared sensor CCS2-Case 1 Saitama Medical University Hospital Parking Lot 6
Vehicle count sensor for air space management | Infrared sensor CCS2-Case 2 Large shopping mall
Vehicle count sensor for air space management | Infrared sensor CCS2-Hotron Co., Ltd.

Vehicle count sensor for air space management | Infrared sensor CCS2
Hotron Co., Ltd.

Hotron Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

45.3hours


About This Product

The pinnacle of vehicle counting sensors! Ceiling-mounted vehicle count sensor using infrared reflection method <Features>

■The pinnacle of vehicle counting sensors! Detects vehicles in both directions with one device

CCS2 is a ceiling-mounted sensor that uses an infrared reflection method. Installed at fixed locations such as entrances and slopes, one unit can detect vehicles in both directions. Detects traffic jams and passing each other.

■Ideal for managing occupancy in large parking lots

Since it is installed on each slope or block, it has the advantage of being easy to install and low cost. By connecting them together, you can use them even in parking lots with wide driveways.

■Basic functions of vehicle count sensor “CCS2”

・With a mounting height of 4m, it can be installed on sites with high ceilings. ・Detection area is 40 spots, enabling detection over a wide range ・Angle adjustment possible up to ±5° ・Easy to check operation by color-coding the display LED according to direction

■Can also be used as a sensor for warning when leaving the warehouse

It detects vehicles exiting the parking lot at vehicle entrances and exits facing sidewalks and roads, and alerts passersby with revolving lights and buzzers.

■CCS2 is easy to install

Vehicle count sensor CCS2 is a sensor that can be easily used by simply setting the installation height and road surface type. <Introduction example>

■Case 1 Saitama Medical University Hospital Parking Lot 6

Parking lot 6 was so large that it was hard to tell which spaces were available. The introduction of sensors that do not need to be buried makes it possible to accurately display the sky and sky, leading to improved convenience for users.

■Case 2 Large shopping mall

For mutual vehicle traffic counting, it is more accurate than a loop coil. Since it is a ceiling-mounted type, it can be installed on existing sites.

■Main specifications

[Operation display LED] ・ (1) Power/operation display LED (single color x 2): Red x 1, Blue x 1 ・Count mode: Turns on after power is turned on (monitoring) Turns off in synchronization with the count pulse ・Gate mode: Turns on after power is turned on (monitoring) Only the red LED turns off in synchronization with the output ・Flashes at a cycle of 400ms when this device has an error ・ (2) Remote control confirmation display LED (single color x 3): Red x 1, Yellow x 1, Blue x 1 [Detection range confirmation mode] Enable/disable (remote control setting) In detection range confirmation mode: Lit in red (operation display LED) ・When detecting the first row on the left and right: Lights up in red (remote control confirmation display LED) ・When detecting the 2nd line on the left or right: Lights up in yellow (remote control confirmation display LED) ・When detecting the third row on the left and right: Lights up in blue (remote control confirmation display LED) ・When detecting the 4th to 5th rows on the left and right: Lights up in blue (operation display LED) [Output contact] Output 1・2 (Count/Gate) Voltageless semiconductor relay contact 1a AC/DC60V 0.3A (resistive load) Output 3・4 (warehousing/outgoing warning) ・No-voltage relay contact 1a AC100V 0.5A (resistive load) ・Electrical life: 1.5 million times or more Output time ・Count pulse: 500ms/1 unit or 250ms/1 unit ・Gate mode: Output ON while in vehicle ・Stationary object detection time: 3 minutes/20 minutes/1 hour/∞ ・Entry/exit warning: Output ON while vehicle is in stock (within forced OFF timer) ・Holding time: 0.5 seconds / 5 seconds / 10 seconds / 15 seconds / 20 seconds / 30 seconds

  • Product

    Vehicle count sensor for air space management | Infrared sensor CCS2

Share this product


310+ people viewing

Last viewed: 10 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of Vehicle count sensor for air space management | Infrared sensor CCS2

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Area judgment Power supply Mass Current consumption Detection range adjustment Detection method Detection target/detection accuracy Maximum detected vehicle speed Sensitivity setting Interference settings External dimensions Installation height setting Installation height (distance between bottom of sensor and road surface) Column ON judgment Usage environment Operating temperature range Reset function Accessories
Vehicle count sensor for air space management | Infrared sensor CCS2-Part Number-CCS2

CCS2

Available upon quote

1 (High) /2/3/4/ (Low) (Remote control setting)

DC12~24V±10%

Approximately 1,800g

At DC12V: 380mA or less At DC24V: 190mA or less

・Mechanical means Fine adjustment of the detection range on the front and back side ・Electrical adjustment means Left and right width: No erase/1 line erase/2 line erase (remote control setting) Front/rear: No erase/1 row erase/2 column erase (remote control) Setting: Valid only when gate mode is set)

Near-infrared reflection method

General vehicles larger than light four-wheeled vehicles - 99% or more

Normal mode: 30km/h or less High-speed mode: 40km/h or less (count mode)

1 (low) /2/3/4 (high) (remote control setting)

H/L 2-frequency setting (Remote control setting: Valid only when gate mode is set)

W415.6 x H83.2 x D89mm

2.4 ~ 3.0m/~3.8m/~4.0m (remote control setting)

2.4 ~ 4.0m (3.7m for asphalt road surface) *Excluding colored pavement
Recommended installation height: 2.6m or more

1 (High) /2/3/4/ (Low) (Remote control setting)

Indoors/semi-indoors (places not directly exposed to rain)

-20 ~ +55℃ (non-condensing)

Using the remote control, the operation is the same as turning the power back on.
When performing linked operation, all linked sensors operate in the same way as when the power is turned on again. (This function does not change the setting value.)

Instruction manual/cable with 12-core connector (standard: 6m)
4-core to 12-core cable with connectors on both ends (Standard: 3.5m)
Raceway mounting screws (2 sets)

Vehicle count sensor for air space management | Infrared sensor CCS2-Part Number-Image of full-space management of multi-story parking lot

Image of full-space management of multi-story parking lot

Available upon quote - - - - - - - - - - - - - - - - - -
Vehicle count sensor for air space management | Infrared sensor CCS2-Part Number-Case 1 Saitama Medical University Hospital Parking Lot 6

Case 1 Saitama Medical University Hospital Parking Lot 6

Available upon quote - - - - - - - - - - - - - - - - - -
Vehicle count sensor for air space management | Infrared sensor CCS2-Part Number-Case 2 Large shopping mall

Case 2 Large shopping mall

Available upon quote - - - - - - - - - - - - - - - - - -

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Infrared Sensors Products

Other products of Hotron Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Hotron Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

45.3hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree