![[Non-contact] Optical touch sensor with built-in eyes HA-T520-HA-T520](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3002208202404281.png)
[Non-contact] Optical touch sensor with built-in eyes HA-T520
Hotron Co., Ltd.
About This Product
The built-in type maintains the beauty of the building, and the light touch function reduces unnecessary opening of the door. A non-contact touch sensor that can be used to save energy and prevent infectious diseases.
■Flat design that maintains the beauty of the entrance
A flat design that maintains the beauty of the entrance. The HA-T520 has a flat design that makes it unobtrusive even when attached to a door, contributing to the creation of an entrance space.
■Recommended for these places
・Example 1: There is a signboard directly above the door
The HA-T520 is an invisible built-in type that allows the sensor to be installed without covering the signboard, so it is recommended for buildings with obstacles such as signboards near the door.
・Case 2: Store with many customers
We used to use touch switches, but we changed to HA-T520, which automatically opens and closes the door by waving your hand, allowing customers to shop with peace of mind.
■Clear hygiene issues without contact
Nowadays, people are concerned about preventing infectious diseases, and there have been cases where touch switches have been installed at sites facing narrow aisles, where hygiene is a concern because an unspecified number of people come into contact with them.
With the optical touch sensor, you can open and close the automatic door just by approaching the door without touching it, which is safe from a sanitary perspective.
■Four spot settings to suit various door types
There are also types of automatic doors that open on one side and types that open on both sides. The HA-T520 can be configured in four ways to suit the installation environment: 4 spots (left, center, right) and 12 spots.
■Two setting modes that reduce unnecessary door opening and closing and contribute to energy savings
You can open and close the automatic door by selecting from two patterns the conditions for detecting a passerby and opening the door.
■Can also be used as a blind infrared sensor
When the light beam touch function is turned off, it can also be used as an invisible infrared sensor with a wide detection range. ON/OFF of the light beam touch function can be confirmed by the color of the LED during standby.
■No need to replace battery of switch
By replacing the conventional touch switch (battery operated) with a touch seal, batteries are no longer required, saving you the trouble of replacing batteries.
-
Product
[Non-contact] Optical touch sensor with built-in eyes HA-T520
-
Handling Company
Hotron Co., Ltd.
-
Categories
1 Models of [Non-contact] Optical touch sensor with built-in eyes HA-T520
| Product Image | Part Number | Price (excluding tax) | 1st row setting | Accessories | Cover color | Depth range setting | Detection method | Eco mode | Insect mode | Interference prevention | Mass | Mounting height | Mounting part distortion countermeasures | Operating temperature range | Output contact | Output holding time | Power consumption/current | Power supply | Ray touch range setting | Response time | Self-diagnosis function | Sensitivity adjustment function | Snow level | Stationary object detection time | Width range setting |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HA-T520 |
Available upon quote | Doorway monitoring automatic/doorway monitoring forced/light touch/normal (dip switch setting) | Wiring code 4P (2m), mounting screws (2 pcs), wiring code 2P (2m), installation pattern, light touch installation manual, instruction manual | Wiring cord 4P (2m), wiring cord 2P (2m), light beam touch installation manual, instruction manual |
Angle adjustment: Main unit 0 ~ +15° (angle adjustment lever) Detection column setting: 5 ~ 2 columns (dip switch setting) |
Near-infrared reflection method | Yes/No (dip switch setting) (for cases other than light beam touch) | Yes/No (Dip switch setting) | 6 frequency settings (dip switch settings) | Approximately 310g | 2.0 ~ 4.0m (up to 3.0m when used as a light beam touch sensor) | Yes/No (dip switch setting) (for cases other than light beam touch) | -20 ~ +60℃ (no condensation) |
Output 1 (start) - No-voltage relay contact 1a (when detected: make) DC50V 0.1A (resistive load) Output 2 (auxiliary) - Non-current contact (MOS relay) 1a (when detected: make) DC50V 0.1A (resistive load) |
Approximately 0.5 seconds |
At AC100V: 4.3VA or less At AC24V: 2.5VA or less At AC12V: 2.5VA or less At 24V DC: 65mA or less At 12V DC: 140mA or less |
AC/DC12 ~ 110V±10% 50/60Hz |
Center/Left/Right/All (Center+Left+Right) Disable selection other than light beam touch (dip switch setting) |
Approximately 0.1 seconds *May be approximately 0.2 seconds depending on settings | Yes/No (Dip switch setting) | Yes (sensitivity volume setting) | Level 0 (none) /1/2/3 (dip switch setting) |
Starting range (outer 2 rows): 2 seconds/10 seconds (dip switch setting) Existence range (3 rows on the door side): 2 seconds / 10 seconds / 60 seconds / ∞ seconds (dip switch setting) |
Detection width setting: 6 to 2 rows (dip switch settings for left and right) Detection range movement: 1 row movement (width range adjustment knob setting for left and right) |
Customers who viewed this product also viewed
![[Non-contact] Light beam touch sensor invisible installation type HA-T401-Hotron Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3002208202404282.png)
Other products of Hotron Co., Ltd.
View more products of Hotron Co., Ltd.
About Company Handling This Product
- Japan