Tensile compression tester TG series
Sanyu Electronics Industry Co., Ltd.
About This Product
It is used to measure the elastic modulus, yield strength, and strength of materials such as metals and plastics. We also perform destructive tests on products and evaluate the quality of assembly during the process.
■Tension and compression material testing machine pursuing multi-function and simple operation
The display and operation switches are consolidated on the front operation panel, and the design prioritizes ease of use. Data processing software allows test control, data analysis, and aggregation from a PC.
■Uses in-house high-precision load cell and control system
A multifunctional and easy-to-use structure that utilizes our in-house high-precision load cell and digital indicator know-how. There are plenty of safety devices.
■Applications
・Tensile compression material testing machine
・Load measuring device
・Product inspection equipment
Tensile compression universal testing machine (material testing machine) pursuing high precision and easy operation
■Pursuing multiple functions and high accuracy, increasing testing efficiency with easy setting operations
・9 models available depending on testing force: 500N, 1kN, 2kN, 5kN, 10kN, 20kN, 50kN, 100kN, 250kN
- Designed with ease of use in mind, with display and operation switches consolidated on the front operation panel.
・Because it is small and lightweight, there are no restrictions on where it can be installed.
・With automatic calibration and auto zero function, no adjustment is required just by connecting the load cell
・Available for ±1% of the indicated value (JIS class 1) and ±0.5% of the indicated value (JIS class 0.5) within the range of 1/1 to 1/500 of the load cell capacity.
・The manual speed used for position setting before testing can be arbitrarily set to 3 speeds.
-
Product
Tensile compression tester TG series
-
Handling Company
Sanyu Electronics Industry Co., Ltd.
-
Categories
9 Models of Tensile compression tester TG series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Allowable test force for speed range | Analog output | Auto zero/auto calibration function | Cycle test function included as standard | Exam space | Load cell capacity determination function | Maximum test force | Measurement accuracy | Measuring range | Moving crosshead position display | Moving crosshead position display Maximum/minimum value setting | Moving crosshead speed range Return speed | Moving crosshead speed range Test speed | Moving crosshead stroke | Peak hold function | Safety device Emergency stop switch | Safety device Limit switch for overstroke prevention | Safety device Overload prevention | Safety device Servo amplifier abnormal stop | Setting maximum and minimum values | Speed accuracy Optional test speed | Speed accuracy Return speed | Speed accuracy Test speed | Speed range of moving crosshead Optional test speed | Speed setting method Optional test speed | Speed setting method Return speed | Speed setting method Test speed | Test effective width | Test force display | Unit of measurement |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TG-10KN |
Available upon quote | 10kN (1,020kgf) over the entire speed range | DC0V~DC5V (Output connector: BNC) | Standard accessory: Automatically performs zero point adjustment and span adjustment using the AUTO ZERO key when a load cell is connected. |
Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible. Maximum number of repetitions: 9,999 times, maximum repetition rate: 5 times/min |
Tensile and compression tests can be performed at the bottom of the moving crosshead. Separately sold: Tensile test at the top and compression test at the bottom | Standard accessories | 10kN (1,020kgf) |
In the range of 20 to 100% of each range, □±1% of indicated value □±0.5% of indicated value |
7 stages of 1,2,5,10,20,50,100 times (for 3mV/V load cell) |
6-digit digital display (-signed) Minimum unit: 0.01mm, maximum display: 1,999.99mm Zero reset can be done at any position. |
Digital display settings using function keys |
Set either preset 1 speed or test speed With overshootless function |
18 stages of 0.05, 0.1, 0.2, 0.3, 0.5, 1, 2, 3, 5, 10, 20, 30, 50, 100, 200, 300, 500, 1,000mm/min | 865mm without test jig and load cell installed | Standard accessory: Automatic peak reset at test start | During operation, the drive power is cut off. | It can be set to any position above or below the movement range of the moving crosshead. During operation, the drive power is cut off. |
When the test force value reaches 102% of the full scale of each range, a stop signal is output and the moving crosshead is stopped. During operation, the drive power is cut off. |
During operation, it outputs an operation stop signal and stops the moving crosshead. The above safety devices will display an alarm when activated. Lead screw protection cover |
Digital display settings using function keys | ±2% of set speed | ±2% of set speed | ±0.1% of set speed |
0.1mm/min~999.9mm/min Can be set at a pitch of 0.1mm/min |
Digital display settings using function keys and cursor keys | Digital display settings using function keys and cursor keys | Digital display settings using cursor keys | 420mm (lead screw protection cover included) | 5-digit digital display (-signed) | SI units and gravity units (kgf) units can be selected using the function keys. The selection of mN, N, kN or gf, kgf, tf is done automatically, but you can also select it arbitrarily. |
|
|
TG-20KN |
Available upon quote | 20kN (2.039tf) over full speed range | DC0V~DC5V (Output connector: BNC) | Standard accessory: Automatically performs zero point adjustment and span adjustment using the AUTO ZERO key when a load cell is connected. |
Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible. Maximum number of repetitions: 9,999 times, maximum repetition rate: 5 times/min |
Tensile and compression tests can be performed at the bottom of the moving crosshead. Separately sold: Tensile test at the top and compression test at the bottom | Standard accessories | 20kN (2.039tf) |
In the range of 20 to 100% of each range, □±1% of indicated value □±0.5% of indicated value |
7 stages of 1,2,5,10,20,50,100 times (for 3mV/V load cell) |
6-digit digital display (-signed) Minimum unit: 0.01mm, maximum display: 1,999.99mm Zero reset can be done at any position. |
Digital display settings using function keys |
Set either preset 1 speed or test speed With overshootless function |
17 steps of 0.05, 0.1, 0.2, 0.3, 0.5, 1, 2, 3, 5, 10, 20, 30, 50, 100, 200, 300, 500mm/min | 990mm without test jig and load cell installed | Standard accessory: Automatic peak reset at test start | During operation, the drive power is cut off. | It can be set to any position above or below the movement range of the moving crosshead. During operation, the drive power is cut off. |
When the test force value reaches 102% of the full scale of each range, a stop signal is output and the moving crosshead is stopped. During operation, the drive power is cut off. |
During operation, it outputs an operation stop signal and stops the moving crosshead. The above safety devices will display an alarm when activated. Lead screw protection cover |
Digital display settings using function keys | ±2% of set speed | ±2% of set speed | ±0.1% of set speed |
0.1mm/min~499.9mm/min Can be set at a pitch of 0.1mm/min |
Digital display settings using function keys and cursor keys | Digital display settings using function keys and cursor keys | Digital display settings using cursor keys | 420mm (lead screw protection cover included) | 5-digit digital display (-signed) | SI units and gravity units (kgf) units can be selected using the function keys. The selection of mN, N, kN or gf, kgf, tf is done automatically, but you can also select it arbitrarily. |
|
|
TG-50KN |
Available upon quote | 50kN (5.099tf) over full speed range | DC0V~DC5V (Output connector: BNC) | Standard accessory: Automatically performs zero point adjustment and span adjustment using the AUTO ZERO key when a load cell is connected. |
Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible. Maximum number of repetitions: 9,999 times, maximum repetition rate: 5 times/min |
Tensile and compression tests can be performed at the bottom of the moving crosshead. Separately sold: Tensile test at the top and compression test at the bottom | Standard accessories | 50kN (5.099tf) |
In the range of 20 to 100% of each range, □±1% of indicated value □±0.5% of indicated value |
7 stages of 1,2,5,10,20,50,100 times (for 3mV/V load cell) |
6-digit digital display (-signed) Minimum unit: 0.01mm, maximum display: 1,999.99mm Zero reset can be done at any position. |
Digital display settings using function keys |
Set either preset 1 speed or test speed With overshootless function |
17 steps of 0.05, 0.1, 0.2, 0.3, 0.5, 1, 2, 3, 5, 10, 20, 30, 50, 100, 200, 300, 500mm/min | 970mm without test jig and load cell installed | Standard accessory: Automatic peak reset at test start | During operation, the drive power is cut off. | It can be set to any position above or below the movement range of the moving crosshead. During operation, the drive power is cut off. |
When the test force value reaches 102% of the full scale of each range, a stop signal is output and the moving crosshead is stopped. During operation, the drive power is cut off. |
During operation, it outputs an operation stop signal and stops the moving crosshead. The above safety devices will display an alarm when activated. Lead screw protection cover |
Digital display settings using function keys | ±2% of set speed | ±2% of set speed | ±0.1% of set speed |
0.1mm/min~499.9mm/min Can be set at a pitch of 0.1mm/min |
Digital display settings using function keys and cursor keys | Digital display settings using function keys and cursor keys | Digital display settings using cursor keys | 420mm (lead screw protection cover included) | 5-digit digital display (-signed) | SI units and gravity units (kgf) units can be selected using the function keys. The selection of mN, N, kN or gf, kgf, tf is done automatically, but you can also select it arbitrarily. |
|
|
TG-100KN |
Available upon quote | 100kN (10.20tf) over the entire speed range | DC0V~DC5V (Output connector: BNC) | Standard accessory: Automatically performs zero point adjustment and span adjustment using the AUTO ZERO key when a load cell is connected. |
Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible. Maximum number of repetitions: 9,999 times, maximum repetition rate: 5 times/min |
Tensile and compression tests can be performed at the bottom of the moving crosshead. Separately sold: Tensile test at the top and compression test at the bottom | Standard accessories | 100kN (10.20tf) |
In the range of 20 to 100% of each range, □±1% of indicated value □±0.5% of indicated value |
7 stages of 1,2,5,10,20,50,100 times (for 3mV/V load cell) |
6-digit digital display (-signed) Minimum unit: 0.01mm, maximum display: 1,999.99mm Zero reset can be done at any position. |
Digital display settings using function keys |
Set either preset 1 speed or test speed With overshootless function |
17 steps of 0.05, 0.1, 0.2, 0.3, 0.5, 1, 2, 3, 5, 10, 20, 30, 50, 100, 200, 300, 500mm/min | 1,350mm without test jig and load cell installed | Standard accessory: Automatic peak reset at test start | During operation, the drive power is cut off. | It can be set to any position above or below the movement range of the moving crosshead. During operation, the drive power is cut off. |
When the test force value reaches 102% of the full scale of each range, a stop signal is output and the moving crosshead is stopped. During operation, the drive power is cut off. |
During operation, it outputs an operation stop signal and stops the moving crosshead. The above safety devices will display an alarm when activated. Lead screw protection cover |
Digital display settings using function keys | ±2% of set speed | ±2% of set speed | ±0.1% of set speed |
0.1mm/min~499.9mm/min Can be set at a pitch of 0.1mm/min |
Digital display settings using function keys and cursor keys | Digital display settings using function keys and cursor keys | Digital display settings using cursor keys | 600mm (lead screw protection cover included) | 5-digit digital display (-signed) | SI units and gravity units (kgf) units can be selected using the function keys. The selection of mN, N, kN or gf, kgf, tf is done automatically, but you can also select it arbitrarily. |
|
|
TG-250KN |
Available upon quote | 250kN (25.49tf) over full speed range | DC0V~DC5V (Output connector: BNC) | Standard accessory: Automatically performs zero point adjustment and span adjustment using the AUTO ZERO key when a load cell is connected. |
Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible. Maximum number of repetitions: 9,999 times, maximum repetition rate: 5 times/min |
Tensile and compression tests can be performed at the bottom of the moving crosshead. Separately sold: Tensile test at the top and compression test at the bottom | Standard accessories | 250kN (25.49tf) |
In the range of 20 to 100% of each range, □±1% of indicated value □±0.5% of indicated value |
7 stages of 1,2,5,10,20,50,100 times (for 3mV/V load cell) |
6-digit digital display (-signed) Minimum unit: 0.01mm, maximum display: 1,999.99mm Zero reset can be done at any position. |
Digital display settings using function keys |
Set either preset 1 speed or test speed With overshootless function |
17 steps of 0.05, 0.1, 0.2, 0.3, 0.5, 1, 2, 3, 5, 10, 20, 30, 50, 100, 200, 300, 500mm/min | 1,350mm without test jig and load cell installed | Standard accessory: Automatic peak reset at test start | During operation, the drive power is cut off. | It can be set to any position above or below the movement range of the moving crosshead. During operation, the drive power is cut off. |
When the test force value reaches 102% of the full scale of each range, a stop signal is output and the moving crosshead is stopped. During operation, the drive power is cut off. |
During operation, it outputs an operation stop signal and stops the moving crosshead. The above safety devices will display an alarm when activated. Lead screw protection cover |
Digital display settings using function keys | ±2% of set speed | ±2% of set speed | ±0.1% of set speed |
0.1mm/min~499.9mm/min Can be set at a pitch of 0.1mm/min |
Digital display settings using function keys and cursor keys | Digital display settings using function keys and cursor keys | Digital display settings using cursor keys | 600mm (lead screw protection cover included) | 5-digit digital display (-signed) | SI units and gravity units (kgf) units can be selected using the function keys. The selection of mN, N, kN or gf, kgf, tf is done automatically, but you can also select it arbitrarily. |
|
|
TG-500N |
Available upon quote | 500N (50.99kgf) over the entire speed range | DC0V~DC5V (Output connector: BNC) | Standard accessory: Automatically performs zero point adjustment and span adjustment using the AUTO ZERO key when a load cell is connected. |
Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible. Maximum number of repetitions: 9,999 times, maximum repetition rate: 5 times/min |
Tensile and compression tests can be performed at the bottom of the moving crosshead. Separately sold: Tensile test at the top and compression test at the bottom | Standard accessories | 500N (50.99kgf) |
In the range of 20 to 100% of each range, □±1% of indicated value □±0.5% of indicated value |
7 stages of 1,2,5,10,20,50,100 times (for 3mV/V load cell) |
6-digit digital display (-signed) Minimum unit: 0.01mm, maximum display: 1,999.99mm Zero reset can be done at any position. |
Digital display settings using function keys |
Set either preset 1 speed or test speed With overshootless function |
18 stages of 0.05, 0.1, 0.2, 0.3, 0.5, 1, 2, 3, 5, 10, 20, 30, 50, 100, 200, 300, 500, 1,000mm/min | 790mm without test jig and load cell installed | Standard accessory: Automatic peak reset at test start | During operation, the drive power is cut off. | It can be set to any position above or below the movement range of the moving crosshead. During operation, the drive power is cut off. |
When the test force value reaches 102% of the full scale of each range, a stop signal is output and the moving crosshead is stopped. During operation, the drive power is cut off. |
During operation, it outputs an operation stop signal and stops the moving crosshead. The above safety devices will display an alarm when activated. Lead screw protection cover |
Digital display settings using function keys | ±2% of set speed | ±2% of set speed | ±0.1% of set speed |
0.1mm/min~999.9mm/min Can be set at a pitch of 0.1mm/min |
Digital display settings using function keys and cursor keys | Digital display settings using function keys and cursor keys | Digital display settings using cursor keys | 300mm (lead screw protection cover included) | 5-digit digital display (-signed) | SI units and gravity units (kgf) units can be selected using the function keys. The selection of mN, N, kN or gf, kgf, tf is done automatically, but you can also select it arbitrarily. |
|
|
TG-1KN |
Available upon quote | 1kN (102.0kgf) over the entire speed range | DC0V~DC5V (Output connector: BNC) | Standard accessory: Automatically performs zero point adjustment and span adjustment using the AUTO ZERO key when a load cell is connected. |
Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible. Maximum number of repetitions: 9,999 times, maximum repetition rate: 5 times/min |
Tensile and compression tests can be performed at the bottom of the moving crosshead. Separately sold: Tensile test at the top and compression test at the bottom | Standard accessories | 1kN (102.0kgf) |
In the range of 20 to 100% of each range, □±1% of indicated value □±0.5% of indicated value |
7 stages of 1,2,5,10,20,50,100 times (for 3mV/V load cell) |
6-digit digital display (-signed) Minimum unit: 0.01mm, maximum display: 1,999.99mm Zero reset can be done at any position. |
Digital display settings using function keys |
Set either preset 1 speed or test speed With overshootless function |
18 stages of 0.05, 0.1, 0.2, 0.3, 0.5, 1, 2, 3, 5, 10, 20, 30, 50, 100, 200, 300, 500, 1,000mm/min | 760mm without test jig and load cell installed | Standard accessory: Automatic peak reset at test start | During operation, the drive power is cut off. | It can be set to any position above or below the movement range of the moving crosshead. During operation, the drive power is cut off. |
When the test force value reaches 102% of the full scale of each range, a stop signal is output and the moving crosshead is stopped. During operation, the drive power is cut off. |
During operation, it outputs an operation stop signal and stops the moving crosshead. The above safety devices will display an alarm when activated. Lead screw protection cover |
Digital display settings using function keys | ±2% of set speed | ±2% of set speed | ±0.1% of set speed |
0.1mm/min~999.9mm/min Can be set at a pitch of 0.1mm/min |
Digital display settings using function keys and cursor keys | Digital display settings using function keys and cursor keys | Digital display settings using cursor keys | 300mm (lead screw protection cover included) | 5-digit digital display (-signed) | SI units and gravity units (kgf) units can be selected using the function keys. The selection of mN, N, kN or gf, kgf, tf is done automatically, but you can also select it arbitrarily. |
|
|
TG-2KN |
Available upon quote | 2kN (203.9kgf) over the entire speed range | DC0V~DC5V (Output connector: BNC) | Standard accessory: Automatically performs zero point adjustment and span adjustment using the AUTO ZERO key when a load cell is connected. |
Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible. Maximum number of repetitions: 9,999 times, maximum repetition rate: 5 times/min |
Tensile and compression tests can be performed at the bottom of the moving crosshead. Separately sold: Tensile test at the top and compression test at the bottom | Standard accessories | 2kN (203.9kgf) |
In the range of 20 to 100% of each range, □±1% of indicated value □±0.5% of indicated value |
7 stages of 1,2,5,10,20,50,100 times (for 3mV/V load cell) |
6-digit digital display (-signed) Minimum unit: 0.01mm, maximum display: 1,999.99mm Zero reset can be done at any position. |
Digital display settings using function keys |
Set either preset 1 speed or test speed With overshootless function |
18 stages of 0.05, 0.1, 0.2, 0.3, 0.5, 1, 2, 3, 5, 10, 20, 30, 50, 100, 200, 300, 500, 1,000mm/min | 865mm without test jig and load cell installed | Standard accessory: Automatic peak reset at test start | During operation, the drive power is cut off. | It can be set to any position above or below the movement range of the moving crosshead. During operation, the drive power is cut off. |
When the test force value reaches 102% of the full scale of each range, a stop signal is output and the moving crosshead is stopped. During operation, the drive power is cut off. |
During operation, it outputs an operation stop signal and stops the moving crosshead. The above safety devices will display an alarm when activated. Lead screw protection cover |
Digital display settings using function keys | ±2% of set speed | ±2% of set speed | ±0.1% of set speed |
0.1mm/min~999.9mm/min Can be set at a pitch of 0.1mm/min |
Digital display settings using function keys and cursor keys | Digital display settings using function keys and cursor keys | Digital display settings using cursor keys | 420mm (lead screw protection cover included) | 5-digit digital display (-signed) | SI units and gravity units (kgf) units can be selected using the function keys. The selection of mN, N, kN or gf, kgf, tf is done automatically, but you can also select it arbitrarily. |
|
|
TG-5KN |
Available upon quote | 5kN (509.9kgf) over the entire speed range | DC0V~DC5V (Output connector: BNC) | Standard accessory: Automatically performs zero point adjustment and span adjustment using the AUTO ZERO key when a load cell is connected. |
Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible. Maximum number of repetitions: 9,999 times, maximum repetition rate: 5 times/min |
Tensile and compression tests can be performed at the bottom of the moving crosshead. Separately sold: Tensile test at the top and compression test at the bottom | Standard accessories | 5kN (509.9kgf) |
In the range of 20 to 100% of each range, □±1% of indicated value □±0.5% of indicated value |
7 stages of 1,2,5,10,20,50,100 times (for 3mV/V load cell) |
6-digit digital display (-signed) Minimum unit: 0.01mm, maximum display: 1,999.99mm Zero reset can be done at any position. |
Digital display settings using function keys |
Set either preset 1 speed or test speed With overshootless function |
18 stages of 0.05, 0.1, 0.2, 0.3, 0.5, 1, 2, 3, 5, 10, 20, 30, 50, 100, 200, 300, 500, 1,000mm/min | 865mm without test jig and load cell installed | Standard accessory: Automatic peak reset at test start | During operation, the drive power is cut off. | It can be set to any position above or below the movement range of the moving crosshead. During operation, the drive power is cut off. |
When the test force value reaches 102% of the full scale of each range, a stop signal is output and the moving crosshead is stopped. During operation, the drive power is cut off. |
During operation, it outputs an operation stop signal and stops the moving crosshead. The above safety devices will display an alarm when activated. Lead screw protection cover |
Digital display settings using function keys | ±2% of set speed | ±2% of set speed | ±0.1% of set speed |
0.1mm/min~999.9mm/min Can be set at a pitch of 0.1mm/min |
Digital display settings using function keys and cursor keys | Digital display settings using function keys and cursor keys | Digital display settings using cursor keys | 420mm (lead screw protection cover included) | 5-digit digital display (-signed) | SI units and gravity units (kgf) units can be selected using the function keys. The selection of mN, N, kN or gf, kgf, tf is done automatically, but you can also select it arbitrarily. |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Sanyu Electronics Industry Co., Ltd.
View more products of Sanyu Electronics Industry Co., Ltd.
