Tension compression testing machine TGI series-TGI-10KN

Tension compression testing machine TGI series
Sanyu Electronics Industry Co., Ltd.

Sanyu Electronics Industry Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

72.4hours

About This Product

It is used to measure the elastic modulus, yield strength, and strength of materials such as metals and plastics. We also perform destructive tests on products and evaluate the quality of assembly during the process.

■Tension and compression material testing machine pursuing multi-function and simple operationThe display and operation switches are consolidated on the front operation panel, and the design prioritizes ease of use. Data processing software allows test control, data analysis, and aggregation from a PC.

■Uses in-house high-precision load cell and control systemA multifunctional and easy-to-use structure that utilizes our in-house high-precision load cell and digital indicator know-how. There are plenty of safety devices.

■Applications・Tensile compression material testing machine
・Load measuring device
・Product inspection equipment

New tabletop testing machine (material testing machine) with high accuracy, high functionality, and simple operation

■High precision・Available for ±1% of the indicated value (JIS class 1) or ±0.5% of the indicated value (JIS class 0.5) within the range of 1/1 to 1/1,000 of the load cell capacity
・Crosshead speed range is 0.0005mm/min to 1,000mm/min (TGI-50kN to TGI-250kN: 0.0005mm/min to 500mm/min), and speed accuracy is ±0.1% of the set speed at all speeds.

■High functionality and simple operation・Load cell automatic span setting, one-push auto zero, test start point automatic return function (overshoot-less), test condition registration, arbitrary setting manual speed (3 speeds), analog output of test force and position, compatible with continuous repeated tension and compression tests .
・The resolution of the servo motor is 4 times more precise than the previous model.
- Significantly improves position control operations and enables stable operation at low speeds.

■ Faster return speedCan be set arbitrarily from 0.1mm/min to 1,500mm/min (10kN or less), 0.1mm/min to 750mm/min (50kN or more)

Model
There are 8 models available for this product.

Product
Tension compression testing machine TGI series

Handling Company
Sanyu Electronics Industry Co., Ltd.

Categories

Test Equipment

Tensile Testers

Test Equipment

Compression Testers

640+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

8 Models of Tension compression testing machine TGI series

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Speed accuracy	Allowable test force for speed range	Speed setting method	Communication function standard	Test condition registration function	Test effective width	Exam space	Number of views	Moving crosshead position measurement display range	Moving crosshead position measurement Display unit	Moving crosshead position measurement Display resolution	Moving crosshead position measurement Position display	Moving crosshead position measurement Zero reset	Moving crosshead position measurement Analog output	Moving crosshead stroke	Unit of measurement	Maximum test force	Safety device Stroke limit	Safety device Servo amplifier abnormal stop function	Safety device EMERGENCY switch	Load cell capacity determination	Return speed	Manual speed	Peak/break detection function	Cycle test function setting method	Cycle test function Maximum repetition rate	Cycle test function Maximum number of repetitions	Auto zero function	Analog output	AD sampling
TGI-10KN	Available upon quote	±0.1% of set speed	10kN (1.020tf) over the entire speed range	Enter numerical values on the operation panel	Compliant with USB2.0. Can also be used with devices that meet the USE1.1 standard.	Up to 10 test conditions can be registered in a file. By reading the registered file, test conditions are automatically set on the test machine.	430mm (lead screw protection cover included)	Tensile and compression tests are performed at the bottom of the moving crosshead. Upper tension type: sold separately	4 times/s	Minimum unit: 0.001mm, maximum display: ±1,999.999mm	Mm	0.001	61/2 digit digital display (-signed)	Zero reset is possible at any position using the "RESET" key.	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,090mm without test jig and load cell installed Stroke extension: sold separately	SI units mN, N, kN	10kN (1.020tf)	The moving crosshead can be set to any position above or below the operating range. Stops the movement of the moving crosshead when activated	When activated, it outputs a stop signal and stops the moving crosshead.	When activated, it stops the movement of the moving crosshead. (Lock type)	With automatic discrimination function	0.1mm/min~1,500mm/min can be set arbitrarily	3-speed switching system: HIGH, MIDDLE, and LOW	After the test is completed, use the "PEAK/BREAK" key to display the peak test force value and position value or the test force value and position value at the break point.	Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible.	5 times/min	10,000 times	Automatic zero point adjustment using the “ZERO” key	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,000 times/s
TGI-50KN	Available upon quote	±0.1% of set speed	50kN (5.099tf) over full speed range	Enter numerical values on the operation panel	Compliant with USB2.0. Can also be used with devices that meet the USE1.1 standard.	Up to 10 test conditions can be registered in a file. By reading the registered file, test conditions are automatically set on the test machine.	420mm (lead screw protection cover included)	Tensile and compression tests are performed at the bottom of the moving crosshead. Upper tension type: sold separately	4 times/s	Minimum unit: 0.001mm, maximum display: ±1,999.999mm	Mm	0.001	61/2 digit digital display (-signed)	Zero reset is possible at any position using the "RESET" key.	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	Test jig, 1,015mm without load cell attached Stroke extension: sold separately	SI units mN, N, kN	50kN (5.099tf)	The moving crosshead can be set to any position above or below the operating range. Stops the movement of the moving crosshead when activated	When activated, it outputs a stop signal and stops the moving crosshead.	When activated, it stops the movement of the moving crosshead. (Lock type)	With automatic discrimination function	0.1mm/min~750mm/min can be set arbitrarily	3-speed switching system: HIGH, MIDDLE, and LOW	After the test is completed, use the "PEAK/BREAK" key to display the peak test force value and position value or the test force value and position value at the break point.	Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible.	5 times/min	10,000 times	Automatic zero point adjustment using the “ZERO” key	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,000 times/s
TGI-100KN	Available upon quote	±0.1% of set speed	100kN (10.20tf) over the entire speed range	Enter numerical values on the operation panel	Compliant with USB2.0. Can also be used with devices that meet the USE1.1 standard.	Up to 10 test conditions can be registered in a file. By reading the registered file, test conditions are automatically set on the test machine.	600mm (lead screw protection cover included)	Tensile and compression tests are performed at the bottom of the moving crosshead. Upper tension type: sold separately	4 times/s	Minimum unit: 0.001mm, maximum display: ±1,999.999mm	Mm	0.001	61/2 digit digital display (-signed)	Zero reset is possible at any position using the "RESET" key.	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,350mm without test jig and load cell installed Stroke extension: sold separately	SI units mN, N, kN	100kN (10.20tf)	The moving crosshead can be set to any position above or below the operating range. Stops the movement of the moving crosshead when activated	When activated, it outputs a stop signal and stops the moving crosshead.	When activated, it stops the movement of the moving crosshead. (Lock type)	With automatic discrimination function	0.1mm/min~750mm/min can be set arbitrarily	3-speed switching system: HIGH, MIDDLE, and LOW	After the test is completed, use the "PEAK/BREAK" key to display the peak test force value and position value or the test force value and position value at the break point.	Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible.	5 times/min	10,000 times	Automatic zero point adjustment using the “ZERO” key	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,000 times/s
TGI-200N	Available upon quote	±0.1% of set speed	200N (20.39kgf) over the entire speed range	Enter numerical values on the operation panel	Compliant with USB2.0. Can also be used with devices that meet the USE1.1 standard.	Up to 10 test conditions can be registered in a file. By reading the registered file, test conditions are automatically set on the test machine.	430mm (lead screw protection cover included)	Tensile and compression tests are performed at the bottom of the moving crosshead. Upper tension type: sold separately	4 times/s	Minimum unit: 0.001mm, maximum display: ±1,999.999mm	Mm	0.001	61/2 digit digital display (-signed)	Zero reset is possible at any position using the "RESET" key.	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,090mm without test jig and load cell installed Stroke extension: sold separately	SI units mN, N, kN	200N (20.39kgf)	The moving crosshead can be set to any position above or below the operating range. Stops the movement of the moving crosshead when activated	When activated, it outputs a stop signal and stops the moving crosshead.	When activated, it stops the movement of the moving crosshead. (Lock type)	With automatic discrimination function	0.1mm/min~1,500mm/min can be set arbitrarily	3-speed switching system: HIGH, MIDDLE, and LOW	After the test is completed, use the "PEAK/BREAK" key to display the peak test force value and position value or the test force value and position value at the break point.	Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible.	5 times/min	10,000 times	Automatic zero point adjustment using the “ZERO” key	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,000 times/s
TGI-250KN	Available upon quote	±0.1% of set speed	250kN (25.49tf) over full speed range	Enter numerical values on the operation panel	Compliant with USB2.0. Can also be used with devices that meet the USE1.1 standard.	Up to 10 test conditions can be registered in a file. By reading the registered file, test conditions are automatically set on the test machine.	600mm (lead screw protection cover included)	Tensile and compression tests are performed at the bottom of the moving crosshead. Upper tension type: sold separately	4 times/s	Minimum unit: 0.001mm, maximum display: ±1,999.999mm	Mm	0.001	61/2 digit digital display (-signed)	Zero reset is possible at any position using the "RESET" key.	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,550mm without test jig and load cell installed Stroke extension: sold separately	SI units mN, N, kN	250kN (25.49tf)	The moving crosshead can be set to any position above or below the operating range. Stops the movement of the moving crosshead when activated	When activated, it outputs a stop signal and stops the moving crosshead.	When activated, it stops the movement of the moving crosshead. (Lock type)	With automatic discrimination function	0.1mm/min~750mm/min can be set arbitrarily	3-speed switching system: HIGH, MIDDLE, and LOW	After the test is completed, use the "PEAK/BREAK" key to display the peak test force value and position value or the test force value and position value at the break point.	Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible.	5 times/min	10,000 times	Automatic zero point adjustment using the “ZERO” key	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,000 times/s
TGI-500N	Available upon quote	±0.1% of set speed	500N (50.99kgf) over the entire speed range	Enter numerical values on the operation panel	Compliant with USB2.0. Can also be used with devices that meet the USE1.1 standard.	Up to 10 test conditions can be registered in a file. By reading the registered file, test conditions are automatically set on the test machine.	430mm (lead screw protection cover included)	Tensile and compression tests are performed at the bottom of the moving crosshead. Upper tension type: sold separately	4 times/s	Minimum unit: 0.001mm, maximum display: ±1,999.999mm	Mm	0.001	61/2 digit digital display (-signed)	Zero reset is possible at any position using the "RESET" key.	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,090mm without test jig and load cell installed Stroke extension: sold separately	SI units mN, N, kN	500N (50.99kgf)	The moving crosshead can be set to any position above or below the operating range. Stops the movement of the moving crosshead when activated	When activated, it outputs a stop signal and stops the moving crosshead.	When activated, it stops the movement of the moving crosshead. (Lock type)	With automatic discrimination function	0.1mm/min~1,500mm/min can be set arbitrarily	3-speed switching system: HIGH, MIDDLE, and LOW	After the test is completed, use the "PEAK/BREAK" key to display the peak test force value and position value or the test force value and position value at the break point.	Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible.	5 times/min	10,000 times	Automatic zero point adjustment using the “ZERO” key	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,000 times/s
TGI-1KN	Available upon quote	±0.1% of set speed	1kN (102.0kgf) over the entire speed range	Enter numerical values on the operation panel	Compliant with USB2.0. Can also be used with devices that meet the USE1.1 standard.	Up to 10 test conditions can be registered in a file. By reading the registered file, test conditions are automatically set on the test machine.	430mm (lead screw protection cover included)	Tensile and compression tests are performed at the bottom of the moving crosshead. Upper tension type: sold separately	4 times/s	Minimum unit: 0.001mm, maximum display: ±1,999.999mm	Mm	0.001	61/2 digit digital display (-signed)	Zero reset is possible at any position using the "RESET" key.	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,090mm without test jig and load cell installed Stroke extension: sold separately	SI units mN, N, kN	1kN (102.0kgf)	The moving crosshead can be set to any position above or below the operating range. Stops the movement of the moving crosshead when activated	When activated, it outputs a stop signal and stops the moving crosshead.	When activated, it stops the movement of the moving crosshead. (Lock type)	With automatic discrimination function	0.1mm/min~1,500mm/min can be set arbitrarily	3-speed switching system: HIGH, MIDDLE, and LOW	After the test is completed, use the "PEAK/BREAK" key to display the peak test force value and position value or the test force value and position value at the break point.	Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible.	5 times/min	10,000 times	Automatic zero point adjustment using the “ZERO” key	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,000 times/s
TGI-5KN	Available upon quote	±0.1% of set speed	5kN (509.9kgf) over the entire speed range	Enter numerical values on the operation panel	Compliant with USB2.0. Can also be used with devices that meet the USE1.1 standard.	Up to 10 test conditions can be registered in a file. By reading the registered file, test conditions are automatically set on the test machine.	430mm (lead screw protection cover included)	Tensile and compression tests are performed at the bottom of the moving crosshead. Upper tension type: sold separately	4 times/s	Minimum unit: 0.001mm, maximum display: ±1,999.999mm	Mm	0.001	61/2 digit digital display (-signed)	Zero reset is possible at any position using the "RESET" key.	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,090mm without test jig and load cell installed Stroke extension: sold separately	SI units mN, N, kN	5kN (509.9kgf)	The moving crosshead can be set to any position above or below the operating range. Stops the movement of the moving crosshead when activated	When activated, it outputs a stop signal and stops the moving crosshead.	When activated, it stops the movement of the moving crosshead. (Lock type)	With automatic discrimination function	0.1mm/min~1,500mm/min can be set arbitrarily	3-speed switching system: HIGH, MIDDLE, and LOW	After the test is completed, use the "PEAK/BREAK" key to display the peak test force value and position value or the test force value and position value at the break point.	Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible.	5 times/min	10,000 times	Automatic zero point adjustment using the “ZERO” key	DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately	1,000 times/s

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Purbent test machine ABK1200

Ohashi Seisakusho Co., Ltd.

460+ people viewing

Response time: 3.85 hours

Tensile Testers

KES-FB1-A/AW

Kato Tech

550+ people viewing

Response time: 7.67 hours

Tensile Testers

2 models listed

Purbent test machine ABK2000

Ohashi Seisakusho Co., Ltd.

390+ people viewing

Response time: 3.85 hours

Tensile Testers

Purbent test machine ABK5000

Ohashi Seisakusho Co., Ltd.

330+ people viewing

Response time: 3.85 hours

Tensile Testers

Can be equipped with BRUKER X-ray CT tensile testing machine

Acro Edge Co., Ltd.

140+ people viewing

Last viewed: 13 hours ago

Response time: 18.41 hours

Tensile Testers

Tensile tester

Crimping Machine Service Co., Ltd.

360+ people viewing

Last viewed: 5 hours ago

Response time: 52.66 hours

Tensile Testers

3 models listed

Peeling Tester MKS Bond Kenken Type Small Adhesion Peeling Tester Analog Scale BA-450/BA-400

Itani Koki Seisakusho Co., Ltd.

150+ people viewing

Tensile Testers

Peeling Tester MKS Bond Kenken Type Adhesive Peeling Tester Digital Scale BA-450D/BA-400D

Itani Koki Seisakusho Co., Ltd.

140+ people viewing

Last viewed: 1 hour ago

Tensile Testers

Prolonged recovery test machine Flexiframe

Grotz Beckelt Japan

400+ people viewing

Response time: 40.76 hours

Tensile Testers

2 models listed

Peel tester MKS Bond Kenken type Adhesive peel tester Analog display type BA-800

Itani Koki Seisakusho Co., Ltd.

110+ people viewing

Tensile Testers

Fixed extension test device Rheogel-S1000

UBM Co., Ltd.

110+ people viewing

Last viewed: 6 hours ago

Response time: 73.38 hours

Tensile Testers

Peel tester MKS Bond Kenken type Adhesive peel tester Digital display type BA-800D

Itani Koki Seisakusho Co., Ltd.

130+ people viewing

Last viewed: 4 hours ago

Tensile Testers

See More Tensile Testers Products

Other products of Sanyu Electronics Industry Co., Ltd.

Reviews shown here are reviews of companies.

Miniature ball bearing metric size radial deep groove ball bearing (with flange)

Sanyu Electronics Industry Co., Ltd.

300+ people viewing

Last viewed: 9 hours ago

Response time: 72.42 hours

Radial Bearings

12 models listed

Miniature ball bearing metric size radial deep groove ball bearing (without flange)

Sanyu Electronics Industry Co., Ltd.

360+ people viewing

Last viewed: 22 hours ago

Response time: 72.42 hours

Thrust Bearings

21 models listed

Miniature ball bearing metric size radial deep groove ball bearing (with retaining ring)

Sanyu Electronics Industry Co., Ltd.

230+ people viewing

Response time: 72.42 hours

Thrust Bearings

7 models listed

Miniature ball bearing inch size radial deep groove ball bearing (with flange)

Sanyu Electronics Industry Co., Ltd.

240+ people viewing

Last viewed: 18 hours ago

Response time: 72.42 hours

Radial Bearings

5 models listed

Miniature ball bearing inch size radial deep groove ball bearing (without flange)

Sanyu Electronics Industry Co., Ltd.

180+ people viewing

Last viewed: 4 hours ago

Response time: 72.42 hours

Thrust Ball Bearings

6 models listed

Rod end bearing

Sanyu Electronics Industry Co., Ltd.

360+ people viewing

Last viewed: 7 hours ago

Response time: 72.42 hours

Rod Ends

24 models listed

Rod end bearing (inch size)

Sanyu Electronics Industry Co., Ltd.

320+ people viewing

Last viewed: 3 hours ago

Response time: 72.42 hours

Ceramic Bearings

28 models listed

Spherical bearing

Sanyu Electronics Industry Co., Ltd.

600+ people viewing

Last viewed: 5 hours ago

Response time: 72.42 hours

Ceramic Bearings

49 models listed

Spherical bearing (inch size)

Sanyu Electronics Industry Co., Ltd.

310+ people viewing

Response time: 72.42 hours

Rod Ends

18 models listed

AC fan motor 06030pb

Sanyu Electronics Industry Co., Ltd.

310+ people viewing

Response time: 72.42 hours

AC Fan Motors

4 models listed

AC fan motor 11925pb

Sanyu Electronics Industry Co., Ltd.

480+ people viewing

Last viewed: 2 hours ago

Response time: 72.42 hours

AC Fan Motors

12 models listed

DC fan motor 2004kl

Sanyu Electronics Industry Co., Ltd.

630+ people viewing

Last viewed: 12 hours ago

Response time: 72.42 hours

DC Fan Motors

12 models listed

View more products of Sanyu Electronics Industry Co., Ltd.

About Company Handling This Product

Sanyu Electronics Industry Co., Ltd.

Response Rate

100.0%

Response Time

72.4hrs

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Tension compression testing machine TGI series Sanyu Electronics Industry Co., Ltd.

Sanyu Electronics Industry Co., Ltd.'s Response Status

About This Product

■Tension and compression material testing machine pursuing multi-function and simple operation

■Uses in-house high-precision load cell and control system

■Applications

■High precision

■High functionality and simple operation

■ Faster return speed

8 Models of Tension compression testing machine TGI series

Customers who viewed this product also viewed

Other products of Sanyu Electronics Industry Co., Ltd.

About Company Handling This Product

Related search keywords

Tension compression testing machine TGI series
Sanyu Electronics Industry Co., Ltd.