Tensile compression tester TGE series
Sanyu Electronics Industry Co., Ltd.

TGE-50KN

±0.5% of set speed or ±0.0025mm/min, whichever is greater

50kN over the entire speed range

Digital display settings via menu mode

420mm (lead screw protection cover included)

5-digit digital display (-signed)

Tensile and compression tests are performed at the bottom of the moving crosshead. Upper tension type: sold separately

-99,999~99,999

4 times/s

-1,999.99~1,999.99

Mm (green LED)

0.01

6-digit digital display (-signed)

Zero reset is possible at any position using the "RESET" key.

DC±5V (Output connector: BNC female)
Load resistance 5kΩ or more, with scaling function
Accuracy: ±0.5%F.S.
Resolution: approx. 1/4,000
Output cable: sold separately

Effective distance between base and moving crosshead without test jig or load cell installed: 1,140mm

0.1mm/min, 0.5mm/min, 1mm/min~500mm/min
Return speed only 0.1mm/min, 0.5mm/min, 1mm/min~550mm/min

Standard accuracy: ±1% of indicated value
High accuracy: ±0.5% of indicated value (sold separately) TGE-LHP

SI units mN, N, kN (green LED)

50kN

When activated, it stops the movement of the moving crosshead. (Lock type)

With automatic discrimination function

Set either test speed or preset 1 speed
With overshootless function

3-speed switching system: HIGH, MIDDLE, and LOW

After the test is completed, use the "PEAK/BREAK" key to display the peak test force value and position value or the test force value and position value at the break point.

Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible.

5 times/min

10,000 times

Automatic zero point adjustment using the “ZERO” key

DC±5V (Output connector: BNC female)
Load resistance 5kΩ or more, with scaling function
Accuracy: ±0.5%F.S.
Resolution: approx. 1/4,000
Output cable: sold separately

1,000 times/s

TGE-100KN

±0.5% of set speed or ±0.0025mm/min, whichever is greater

100kN over the entire speed range

Digital display settings via menu mode

600mm (lead screw protection cover included)

5-digit digital display (-signed)

Tensile and compression tests are performed at the bottom of the moving crosshead. Upper tension type: sold separately

-99,999~99,999

4 times/s

-1,999.99~1,999.99

Mm (green LED)

0.01

6-digit digital display (-signed)

Zero reset is possible at any position using the "RESET" key.

DC±5V (Output connector: BNC female)
Load resistance 5kΩ or more, with scaling function
Accuracy: ±0.5%F.S.
Resolution: approx. 1/4,000
Output cable: sold separately

Effective distance between base and moving crosshead without test jig or load cell installed: 1,555mm

0.1mm/min, 0.5mm/min, 1mm/min~500mm/min
Return speed only 0.1mm/min, 0.5mm/min, 1mm/min~550mm/min

Standard accuracy: ±1% of indicated value
High accuracy: ±0.5% of indicated value (sold separately) TGE-LHP

SI units mN, N, kN (green LED)

100kN

When activated, it stops the movement of the moving crosshead. (Lock type)

With automatic discrimination function

Set either test speed or preset 1 speed
With overshootless function

3-speed switching system: HIGH, MIDDLE, and LOW

After the test is completed, use the "PEAK/BREAK" key to display the peak test force value and position value or the test force value and position value at the break point.

Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible.

5 times/min

10,000 times

Automatic zero point adjustment using the “ZERO” key

DC±5V (Output connector: BNC female)
Load resistance 5kΩ or more, with scaling function
Accuracy: ±0.5%F.S.
Resolution: approx. 1/4,000
Output cable: sold separately

1,000 times/s

TGE250KN

±0.5% of set speed or ±0.0025mm/min, whichever is greater

250kN over the entire speed range

Digital display settings via menu mode

600mm (lead screw protection cover included)

5-digit digital display (-signed)

Tensile and compression tests are performed at the bottom of the moving crosshead. Upper tension type: sold separately

-99,999~99,999

4 times/s

-1,999.99~1,999.99

Mm (green LED)

0.01

6-digit digital display (-signed)

Zero reset is possible at any position using the "RESET" key.

DC±5V (Output connector: BNC female)
Load resistance 5kΩ or more, with scaling function
Accuracy: ±0.5%F.S.
Resolution: approx. 1/4,000
Output cable: sold separately

Effective distance between base and moving crosshead without test jig or load cell installed: 1,690mm

0.1mm/min, 0.5mm/min, 1mm/min~500mm/min
Return speed only 0.1mm/min, 0.5mm/min, 1mm/min~550mm/min

Standard accuracy: ±1% of indicated value
High accuracy: ±0.5% of indicated value (sold separately) TGE-LHP

SI units mN, N, kN (green LED)

250kN

When activated, it stops the movement of the moving crosshead. (Lock type)

With automatic discrimination function

Set either test speed or preset 1 speed
With overshootless function

3-speed switching system: HIGH, MIDDLE, and LOW

After the test is completed, use the "PEAK/BREAK" key to display the peak test force value and position value or the test force value and position value at the break point.

Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible.

5 times/min

10,000 times

Automatic zero point adjustment using the “ZERO” key

DC±5V (Output connector: BNC female)
Load resistance 5kΩ or more, with scaling function
Accuracy: ±0.5%F.S.
Resolution: approx. 1/4,000
Output cable: sold separately

1,000 times/s

TGEseries

±0.5% of set speed or ±0.0025mm/min, whichever is greater

Within the maximum test force over the entire speed range

Digital display settings via menu mode

420mm (lead screw protection cover included)

5-digit digital display (-signed)

Tensile and compression tests are performed at the bottom of the moving crosshead. Upper tension type: sold separately

-99,999~99,999

4 times/s

-1,999.99~1,999.99

Mm (green LED)

0.01

6-digit digital display (-signed)

Zero reset is possible at any position using the "RESET" key.

DC±5V (Output connector: BNC female)
Load resistance 5kΩ or more, with scaling function
Accuracy: ±0.5%F.S.
Resolution: approx. 1/4,000
Output cable: sold separately

Effective distance between base and moving crosshead without test jig or load cell installed: 1,100mm

0.1mm/min, 0.5mm/min, 1mm/min~500mm/min
Return speed only 0.1mm/min, 0.5mm/min, 1mm/min~550mm/min

Standard accuracy: ±1% of indicated value
High accuracy: ±0.5% of indicated value (sold separately) TGE-LHP

SI units mN, N, kN (green LED)

10kN

When activated, it stops the movement of the moving crosshead. (Lock type)

With automatic discrimination function

Set either test speed or preset 1 speed
With overshootless function

3-speed switching system: HIGH, MIDDLE, and LOW

After the test is completed, use the "PEAK/BREAK" key to display the peak test force value and position value or the test force value and position value at the break point.

Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible.

5 times/min

10,000 times

Automatic zero point adjustment using the “ZERO” key

DC±5V (Output connector: BNC female)
Load resistance 5kΩ or more, with scaling function
Accuracy: ±0.5%F.S.
Resolution: approx. 1/4,000
Output cable: sold separately

1,000 times/s