All Categories
History
Response Rate
100.0%
Response Time
10.0hours
Fast Response
Product
Network equipment media converter DN2400E seriesHandling Company
Daiden Co., Ltd.Categories
Click on the part number for more information about each product
Image | Part Number | Price (excluding tax) | Delay time (round trip) | Calorific value | Offer | TX port compatible connector | TX port compatible cable | TX port compliant standards | TX port maximum transmission distance | TX port transmission speed | TX port transmission code | TX port transmission method | TX port pinout | TX port interface | LED display TP | LED display PWR | LED display OPT | FX port Compatible optical fiber | FX port compatible connector | FX port emission center wavelength | FX port emission level | FX port compliant standards | FX port receiving wavelength | FX port light reception level | FX port optical power loss | FX port transmission speed | FX port transmission distance (estimate) | FX port transmission code | FX port transmission method | FX port connector polishing method | FXport interface | Accessories |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DN2400GE |
$ 317.85〜 |
185 BitTime (1.85μs) or less |
Maximum 7,200J/H (main unit only) - Average 5,760 J/H (main unit only) |
Housing type |
RJ-45 connector |
UTP/STP Cat5 cable or higher |
IEEE802.3u 100BASE-TX |
100m |
100Mbps |
MLT-3 code |
Full duplex method |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
Lights up when receiving an idle signal on the TP side (green) / Blinks at high speed when transmitting/receiving data (green) / Blinks at low speed when Signal Detect (green) |
Lights up when power is supplied (green) |
Lights up when receiving an optical side idle signal (green) / Blinks at high speed when transmitting/receiving data (green) / Blinks at low speed when receiving a Far End Fault signal (green) |
Silica-based multimode optical fiber (bandwidth 500MHz/km or more @1300nm) |
SC connector (JIS C 5973 F04 type) |
1,260~1,360nm |
-14~-19dBm (62.5μm) |
IEEE802.3u 100BASE-FX |
1,260~1,360nm |
-14~-30dBm |
0~11dB (62.5μm) |
100Mbps |
2m~2km |
NRZI code |
Full duplex method |
PC polishing |
1 port each for sending and receiving connectors (2 ports in total) |
Power terminal block (manufactured by Phoenix Contact: 1803578) |
|
DN2400GE-BD |
$ 252.85〜 |
185 BitTime (1.85μs) or less |
Maximum 7,200J/H (main unit only) - Average 5,760 J/H (main unit only) |
Board type |
RJ-45 connector |
UTP/STP Cat5 cable or higher |
IEEE802.3u 100BASE-TX |
100m |
100Mbps |
MLT-3 code |
Full duplex method |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
Lights up when receiving an idle signal on the TP side (green) / Blinks at high speed when transmitting/receiving data (green) / Blinks at low speed when Signal Detect (green) |
Lights up when power is supplied (green) |
Lights up when receiving an optical side idle signal (green) / Blinks at high speed when transmitting/receiving data (green) / Blinks at low speed when receiving a Far End Fault signal (green) |
Silica-based multimode optical fiber (bandwidth 500MHz/km or more @1300nm) |
SC connector (JIS C 5973 F04 type) |
1,260~1,360nm |
-14~-19dBm (62.5μm) |
IEEE802.3u 100BASE-FX |
1,260~1,360nm |
-14~-30dBm |
0~11dB (62.5μm) |
100Mbps |
2m~2km |
NRZI code |
Full duplex method |
PC polishing |
1 port each for sending and receiving connectors (2 ports in total) |
Power terminal block (manufactured by Phoenix Contact: 1803578) |
|
DN2400SE |
$ 369.20〜 |
185 BitTime (1.85μs) or less |
Maximum 7,200J/H (main unit only) - Average 5,760 J/H (main unit only) |
Housing type |
RJ-45 connector |
UTP/STP Cat5 cable or higher |
IEEE802.3u 100BASE-TX |
100m |
100Mbps |
MLT-3 code |
Full duplex method |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
Lights up when receiving an idle signal on the TP side (green) / Blinks at high speed when transmitting/receiving data (green) / Blinks at low speed when Signal Detect (green) |
Lights up when power is supplied (green) |
Lights up when receiving an optical side idle signal (green) / Blinks at high speed when transmitting/receiving data (green) / Blinks at low speed when receiving a Far End Fault signal (green) |
Silica-based single mode 1.31μm band zero dispersion optical fiber |
SC connector (JIS C 5973 F04 type) |
1,260~1,360nm |
-8~-15dBm |
IEEE802.3u 100BASE-FX |
1,260~1,360nm |
-8~-34dBm |
0~19dB |
100Mbps |
2m~40km |
NRZI code |
Full duplex method |
PC, SPC, AdPC, UPC polishing |
1 port each for sending and receiving connectors (2 ports in total) |
Power terminal block (manufactured by Phoenix Contact: 1803578) |
|
DN2400SE-BD |
$ 284.70〜 |
185 BitTime (1.85μs) or less |
Maximum 7,200J/H (main unit only) - Average 5,760 J/H (main unit only) |
Board type |
RJ-45 connector |
UTP/STP Cat5 cable or higher |
IEEE802.3u 100BASE-TX |
100m |
100Mbps |
MLT-3 code |
Full duplex method |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
Lights up when receiving an idle signal on the TP side (green) / Blinks at high speed when transmitting/receiving data (green) / Blinks at low speed when Signal Detect (green) |
Lights up when power is supplied (green) |
Lights up when receiving an optical side idle signal (green) / Blinks at high speed when transmitting/receiving data (green) / Blinks at low speed when receiving a Far End Fault signal (green) |
Silica-based single mode 1.31μm band zero dispersion optical fiber |
SC connector (JIS C 5973 F04 type) |
1,260~1,360nm |
-8~-15dBm |
IEEE802.3u 100BASE-FX |
1,260~1,360nm |
-8~-34dBm |
0~19dB |
100Mbps |
2m~40km |
NRZI code |
Full duplex method |
PC, SPC, AdPC, UPC polishing |
1 port each for sending and receiving connectors (2 ports in total) |
Power terminal block (manufactured by Phoenix Contact: 1803578) |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
10.0hrs