All Categories
History
Response Rate
100.0%
Response Time
10.0hours
Fast Response
Product
Network equipment media converter DN5800E seriesHandling Company
Daiden Co., Ltd.Categories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | TX port compatible connector | TX port compatible cable | TX port speed setting | TX port communication method (10M) Compliant standard | TX port Communication method (10M) Transmission speed | TX port Communication method (10M) Transmission code | TX port communication method (10M) transmission method | TX port communication method (100M) Compliant standard | TX port Communication method (100M) Transmission speed | TX port Communication method (100M) Transmission code | TX port Communication method (100M) Transmission method | TX port maximum transmission distance | TX port pinout | TX port interface | LED display TX LK/Act | LED display Pow | FX port Compatible optical fiber | FX port compatible connector | FX port polishing method | FX port emission center wavelength | FX port emission level | FX port compliant standards | FX port receiving wavelength | FX port light reception level | FX port optical power loss | FX port transmission speed | FX port transmission distance guide | FX port transmission code | FX port transmission method | FXport interface |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
DN5800GE |
$ 326.30〜 |
RJ-45 connector |
UTP Cat5 cable or higher |
By setting switch |
IEEE802.3 10BASE-T |
10Mbps |
Manchester code |
Full duplex/half duplex system |
IEEE802.3u 100BASE-TX |
100Mbps |
MLT-3 code |
Full duplex/half duplex system |
100m |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
UTP side: Lights up when link is established/blinks during data communication (green) (located in 2 locations on top - 10/100BASE-TX display - and front) |
Lights up when power is supplied (yellow) |
Silica-based multi-mode optical fiber (bandwidth 500MHz/km or more @1,300nm) |
SC connector (JIS C 5973 F04 type) |
PC polishing |
1,260~1,360nm |
-14~-19dBm (62.5μm) |
IEEE802.3u 100BASE-FX |
1,260~1,360nm |
-14~-30dBm |
0~11dB (62.5μm) |
100Mbps |
2m~2km |
NRZI code |
Full duplex method |
1 port each for sending and receiving connectors (2 ports in total) |
|
|
DN5800SE |
$ 397.80〜 |
RJ-45 connector |
UTP Cat5 cable or higher |
By setting switch |
IEEE802.3 10BASE-T |
10Mbps |
Manchester code |
Full duplex/half duplex system |
IEEE802.3u 100BASE-TX |
100Mbps |
MLT-3 code |
Full duplex/half duplex system |
100m |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
UTP side: Lights up when link is established/blinks during data communication (green) (located in 2 locations on top - 10/100BASE-TX display - and front) |
Lights up when power is supplied (yellow) |
Silica-based single mode 1.31μm band zero dispersion optical fiber |
SC connector (JIS C 5973 F04 type) |
PC, SPC, AdPC, UPC polishing |
1,260~1,360nm |
-8~-15dBm |
IEEE802.3u 100BASE-FX |
1,260~1,360nm |
-8~-34dBm |
0~19dB |
100Mbps |
2m~40km |
NRZI code |
Full duplex method |
1 port each for sending and receiving connectors (2 ports in total) |
|
|
DN5800LE |
$ 725.40〜 |
RJ-45 connector |
UTP Cat5 cable or higher |
By setting switch |
IEEE802.3 10BASE-T |
10Mbps |
Manchester code |
Full duplex/half duplex system |
IEEE802.3u 100BASE-TX |
100Mbps |
MLT-3 code |
Full duplex/half duplex system |
100m |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
UTP side: Lights up when link is established/blinks during data communication (green) (located in 2 locations on top - 10/100BASE-TX display - and front) |
Lights up when power is supplied (yellow) |
Silica-based single mode 1.31μm band zero dispersion optical fiber |
SC connector (JIS C 5973 F04 type) |
PC, SPC, AdPC, UPC polishing |
1,260~1,360nm |
0~-5dBm |
IEEE802.3u 100BASE-FX |
1,260~1,360nm |
0~-34dBm |
0~29dB |
100Mbps |
2m~65km |
NRZI code |
Full duplex method |
1 port each for sending and receiving connectors (2 ports in total) |
|
|
DN5800ZE |
$ 3,884.40〜 |
RJ-45 connector |
UTP Cat5 cable or higher |
By setting switch |
IEEE802.3 10BASE-T |
10Mbps |
Manchester code |
Full duplex/half duplex system |
IEEE802.3u 100BASE-TX |
100Mbps |
MLT-3 code |
Full duplex/half duplex system |
100m |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
UTP side: Lights up when link is established/blinks during data communication (green) (located in 2 locations on top - 10/100BASE-TX display - and front) |
Lights up when power is supplied (yellow) |
Silica-based single mode 1.31μm band zero dispersion optical fiber or 1.55μm band zero dispersion shifted optical fiber (DSF) |
SC connector (JIS C 5973 F04 type) |
PC, SPC, AdPC, UPC polishing |
1,480~1,580nm |
|
IEEE802.3u 100BASE-FX |
1,100~1,600nm |
-9~-45dBm |
14~46dB |
100Mbps |
45~170km |
NRZI code |
Full duplex method |
1 port each for sending and receiving connectors (2 ports in total) |
|
|
DN5800WL3E |
$ 959.40〜 |
RJ-45 connector |
UTP Cat5 cable or higher |
By setting switch |
IEEE802.3 10BASE-T |
10Mbps |
Manchester code |
Full duplex/half duplex system |
IEEE802.3u 100BASE-TX |
100Mbps |
MLT-3 code |
Full duplex/half duplex system |
100m |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
UTP side: Lights up when link is established/blinks during data communication (green) (located in 2 locations on top - 10/100BASE-TX display - and front) |
Lights up when power is supplied (yellow) |
Silica-based single mode 1.31μm band zero dispersion optical fiber |
SC connector (JIS C 5973 F04 type) |
PC, SPC, AdPC, UPC polishing |
1,260~1,360nm |
0~-5dBm |
IEEE802.3u 100BASE-FX |
1,480~1,580nm |
0~-34dBm |
0~29dB |
100Mbps |
2m~65km |
NRZI code |
Full duplex method |
Send/receive connector 1 port |
|
|
DN5800WL5E |
$ 959.40〜 |
RJ-45 connector |
UTP Cat5 cable or higher |
By setting switch |
IEEE802.3 10BASE-T |
10Mbps |
Manchester code |
Full duplex/half duplex system |
IEEE802.3u 100BASE-TX |
100Mbps |
MLT-3 code |
Full duplex/half duplex system |
100m |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
UTP side: Lights up when link is established/blinks during data communication (green) (located in 2 locations on top - 10/100BASE-TX display - and front) |
Lights up when power is supplied (yellow) |
Silica-based single mode 1.31μm band zero dispersion optical fiber |
SC connector (JIS C 5973 F04 type) |
PC, SPC, AdPC, UPC polishing |
1,480~1,580nm |
0~-5dBm |
IEEE802.3u 100BASE-FX |
1,260~1,360nm |
0~-34dBm |
0~29dB |
100Mbps |
2m~65km |
NRZI code |
Full duplex method |
Send/receive connector 1 port |
|
|
DN5800WX5E |
$ 1,901.90〜 |
RJ-45 connector |
UTP Cat5 cable or higher |
By setting switch |
IEEE802.3 10BASE-T |
10Mbps |
Manchester code |
Full duplex/half duplex system |
IEEE802.3u 100BASE-TX |
100Mbps |
MLT-3 code |
Full duplex/half duplex system |
100m |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
UTP side: Lights up when link is established/blinks during data communication (green) (located in 2 locations on top - 10/100BASE-TX display - and front) |
Lights up when power is supplied (yellow) |
Silica-based single mode 1.31μm band zero dispersion optical fiber or 1.55μm band zero dispersion shifted optical fiber (DSF) |
SC connector (JIS C 5973 F04 type) |
PC, SPC, AdPC, UPC polishing |
1,480~1,520nm |
|
IEEE802.3u 100BASE-FX |
1,580~1,620nm |
-3~-35dBm |
8~35dB |
100Mbps |
25~120km |
NRZI code |
Full duplex method |
Send/receive connector 1 port |
|
|
DN5800WX6E |
$ 1,901.90〜 |
RJ-45 connector |
UTP Cat5 cable or higher |
By setting switch |
IEEE802.3 10BASE-T |
10Mbps |
Manchester code |
Full duplex/half duplex system |
IEEE802.3u 100BASE-TX |
100Mbps |
MLT-3 code |
Full duplex/half duplex system |
100m |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
UTP side: Lights up when link is established/blinks during data communication (green) (located in 2 locations on top - 10/100BASE-TX display - and front) |
Lights up when power is supplied (yellow) |
Silica-based single mode 1.31μm band zero dispersion optical fiber or 1.55μm band zero dispersion shifted optical fiber (DSF) |
SC connector (JIS C 5973 F04 type) |
PC, SPC, AdPC, UPC polishing |
1,580~1,620nm |
|
IEEE802.3u 100BASE-FX |
1,480~1,520nm |
-3~-35dBm |
8~35dB |
100Mbps |
25~120km |
NRZI code |
Full duplex method |
Send/receive connector 1 port |
|
|
DN5800WZ5E |
$ 5,096.00〜 |
RJ-45 connector |
UTP Cat5 cable or higher |
By setting switch |
IEEE802.3 10BASE-T |
10Mbps |
Manchester code |
Full duplex/half duplex system |
IEEE802.3u 100BASE-TX |
100Mbps |
MLT-3 code |
Full duplex/half duplex system |
100m |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
UTP side: Lights up when link is established/blinks during data communication (green) (located in 2 locations on top - 10/100BASE-TX display - and front) |
Lights up when power is supplied (yellow) |
Silica-based single mode 1.31μm band zero dispersion optical fiber or 1.55μm band zero dispersion shifted optical fiber (DSF) |
SC connector (JIS C 5973 F04 type) |
PC, SPC, AdPC, UPC polishing |
1,480~1,520nm |
|
IEEE802.3u 100BASE-FX |
1,580~1,620nm |
-10~-44dBm |
15~45dB |
100Mbps |
50~165km |
NRZI code |
Full duplex method |
Send/receive connector 1 port |
|
|
DN5800WZ6E |
$ 5,096.00〜 |
RJ-45 connector |
UTP Cat5 cable or higher |
By setting switch |
IEEE802.3 10BASE-T |
10Mbps |
Manchester code |
Full duplex/half duplex system |
IEEE802.3u 100BASE-TX |
100Mbps |
MLT-3 code |
Full duplex/half duplex system |
100m |
Auto MDI-X (Automatic sequence switching) |
1 port connector for UTP |
UTP side: Lights up when link is established/blinks during data communication (green) (located in 2 locations on top - 10/100BASE-TX display - and front) |
Lights up when power is supplied (yellow) |
Silica-based single mode 1.31μm band zero dispersion optical fiber or 1.55μm band zero dispersion shifted optical fiber (DSF) |
SC connector (JIS C 5973 F04 type) |
PC, SPC, AdPC, UPC polishing |
1,580~1,620nm |
|
IEEE802.3u 100BASE-FX |
1,480~1,520nm |
-10~-44dBm |
15~45dB |
100Mbps |
50~165km |
NRZI code |
Full duplex method |
Send/receive connector 1 port |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
10.0hrs
