All Categories

History

A pressure gauge that can output signals and check pressure using contacts (switches) Bourdon tube pressure gauge with contacts PGS21/PGS23-PGS21
A pressure gauge that can output signals and check pressure using contacts (switches) Bourdon tube pressure gauge with contacts PGS21/PGS23-PGS23
A pressure gauge that can output signals and check pressure using contacts (switches) Bourdon tube pressure gauge with contacts PGS21/PGS23-LCI Co., Ltd.

A pressure gauge that can output signals and check pressure using contacts (switches) Bourdon tube pressure gauge with contacts PGS21/PGS23
LCI Co., Ltd.

LCI Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

4.1hours

Very Fast Response


About This Product

■Bourdon tube pressure gauge with contact (switch)

Bika model PGS21/PGS23 A single pressure gauge that outputs a signal in the event of an abnormality using a contact (switch), allowing you to check pressure on-site.

■Difference between 821 (magnetic snap switch) and 831 (inductive proximity switch)

For this model, you can choose from the following two types of contact (switch) types. The differences between each are listed below. ・821 (Magnetic snap switch) When the pressure value approaches the set value of the switch, the pressure pointer is held in place by the internal magnet to prevent chattering. However, on the other hand, the hysteresis is approximately 2 to 5% (relative to the pressure range), which is comparatively large. Also, because the internal magnets hold it in place, it is relatively resistant to vibration and operates stably. Also, since it is a physical contact, it does not have a long lifespan (although it varies depending on the surrounding conditions), and if it is used more than 100,000 times, there is a risk of failure, so we recommend replacing it. The set value can be changed by the customer, but please set it between 25 and 75% of the pressure range. Also, if there are two or more contacts, separate the set values ​​by at least 20% of the full range. The contact material is silver nickel/gold plating. Although the instantaneous permissible load is 250V/1A, we recommend using the product at a lower current than this and installing a protection circuit against inrush current. ・831 (Inductive proximity switch) Since it is an inductive proximity switch, there is no physical contact and it has a long service life. However, if strong vibrations occur nearby, it may malfunction, and if there is a noise source nearby, the noise may cause malfunction, so please do not select this product. The set value can be set by the customer, but please set it between 10 and 90% of the pressure range. Also, multiple contacts cannot be set to the same pressure value (this may cause malfunction). If you select 3 contacts, please separate the 1st and 3rd contacts by at least 30°.

  • Product

    A pressure gauge that can output signals and check pressure using contacts (switches) Bourdon tube pressure gauge with contacts PGS21/PGS23

Share this product


170+ people viewing

Last viewed: 1 hour ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of A pressure gauge that can output signals and check pressure using contacts (switches) Bourdon tube pressure gauge with contacts PGS21/PGS23

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Electrical connections Temperature error Fluid temperature Wetted parts material Ambient temperature Filling liquid Protection class Case material Window material Window outer diameter
A pressure gauge that can output signals and check pressure using contacts (switches) Bourdon tube pressure gauge with contacts PGS21/PGS23-Part Number-PGS21

PGS21

Available upon quote

Electrical box
Cable gland M20
6 terminals inside (2.5sqmm or less)
With earth terminal

Standard temperature: 20℃
±0.4% error when rising/falling by 10℃

Maximum 80℃

Brass (brass)

-20~60℃

-

IP54

Stainless

Polycarbonate

Φ100 (standard)
Φ160 (special order)

A pressure gauge that can output signals and check pressure using contacts (switches) Bourdon tube pressure gauge with contacts PGS21/PGS23-Part Number-PGS23

PGS23

Available upon quote

Electrical box
Cable gland M20
6 terminals inside (2.5sqmm or less)
With earth terminal

Standard temperature: 20℃
±0.4% error when rising/falling by 10℃

Without filling liquid: max. 200℃
With filling liquid: Maximum 100℃

Stainless

-20~60℃

Silicone oil (only 821 can be filled)

IP65

Stainless

Laminated glass

Φ100 (standard)
Φ160 (special order)

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Pressure Gauges Products

Other products of LCI Co., Ltd.

Reviews shown here are reviews of companies.


View more products of LCI Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

4.1hrs


Company Review

4.0
  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree