Electrostatic precipitator (automatic winding type) Electrol
Toyo Air Conditioning Co., Ltd.
About This Product
■Product overview
This is a high-performance electrostatic precipitator with low pressure loss and high collection rate that is equipped with our unique high-voltage technology. This is an air filter device that combines a high-performance electrostatic precipitator unit and an autoroll that automatically winds and renews the filter media.
■Product features
・High dust collection rate: High dust collection rate of 90% or more (JIS B 9908 format 4).
・Equipped with an hour meter that allows you to check the driving time at a glance: Total driving time is displayed. The cleaning time of the dust collection unit can be easily determined, increasing safety.
・Excellent high-voltage power supply: A high-voltage power supply that can always supply a constant high-voltage power even if the load current and input voltage fluctuate.
- Excellent safety devices: Equipped with a door switch (supply voltage cutoff) and a grounding rod (residual charge release device).
・Long-term automatic operation: The final collection filter material (long length) is automatically wound up by a timer or differential pressure switch, allowing automatic operation until the filter material runs out.
- Galvalume steel plate: Uses galvalume steel plate (molten aluminum galvanized plywood) with high rust prevention properties.
■Applications
Please use it to purify the air in the following places.
・For on-site air purification: skyscrapers, offices, theaters, department stores, underground malls, schools, museums, libraries, hotels
・To ensure hygiene: hospitals, pharmaceutical factories, food factories, research institutes
・For industrial use: electronic testing equipment room, precision equipment factory, semiconductor factory
■Dust collection principle
Floating dust passing through the ionized dust collection unit is charged to a positive (+) charge in the ionization section, and is collected on the (-) electrode plate of the dielectric dust collection plate group. Floating dust collected on the dust-collecting electrode plates gradually aggregates, is separated from the electrode plates by the airflow, and is collected again on the long filter media on the downstream side. Dirty filter media is sequentially wound up by a timer or differential pressure switch.
■Structure
The TAC Electrol consists of (1) ionized dust collector, (2) filter media dust collector, (3) control panel, and (4) high-voltage power supply.
-
Product
Electrostatic precipitator (automatic winding type) Electrol
-
Handling Company
Toyo Air Conditioning Co., Ltd.
-
Categories
2 Models of Electrostatic precipitator (automatic winding type) Electrol
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Air volume | Airflow direction | Body frame material | Differential pressure gauge | Differential pressure switch | Dust collection rate | Filter media width dimension | High voltage power supply | Indicator light | Ionized dust collection unit | One winding length | Operation | Power supply | Pre-filter | Protection device | Reduction motor | Safety equipment | Shipping form | Spare parts | Timer unit | Wind speed | Winding completion notification | Winding start method |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Electrole horizontal winding type |
Available upon quote | 4,200~53,200㎥/h | Upstream filter media storage side, with filter media storage door | Galvalume steel plate | 0~300Pa differential pressure gauge (installed on all models) | Recommended setting value 70~170Pa (setting value varies depending on usage conditions) | 90% or more (JIS B 9908 format 4) | A type 800mm, M type 1,200mm, C type 1,400mm, B type 1,600mm, L type 1,800mm | Silicon rectifier constant voltage method output D.C +11.5kV, transistor method (8mA, 4mA) | Power indicator (white), winding completion indicator (green), charge indicator (red), error indicator (orange) | Two-stage charging (dielectric) method | The differential pressure type stops when the differential pressure drops by 30Pa from the set winding pressure, and the timer type winds up in 130mm sections. | Automatic operation - off - manual winding changeover switch | AC200/220V, 50/60Hz, 3 phase (high voltage power supply is single phase) | 12 mesh wire mesh | Operation circuit fuse, overcurrent relay | AC200/220V, 3-phase, E class, fully enclosed self-cooled type, output 0.1kW, reduction ratio 1:672 | Comes with door switch (high voltage supply cutoff device) and ground rod (residual charge release device) | Main unit - vinyl packaging, filter media/dust collection unit - cardboard packaging | 1 fuse, 1 control panel door key, 3 discharge wires per dust collection unit | 9~40h (setting time varies depending on model) | 2.5m/s | Winding completion indicator light, signal circuit with indicator circuit using non-voltage a contact | Differential pressure type, timer type, differential pressure/timer switching type, differential pressure/timer combination type |
|
|
Electrol vertical winding |
Available upon quote | 4,260~153,600㎥/h | Upstream filter media storage side, with filter media storage door | Galvalume steel plate | 0~300Pa differential pressure gauge (installed on all models) | Recommended setting value 70~170Pa (setting value varies depending on usage conditions) | 90% or more (JIS B 9908 format 4) | A type 800mm, M type 1,200mm, C type 1,400mm, B type 1,600mm, L type 1,800mm | Silicon rectifier constant voltage method output D.C +11.5kV, transistor method (8mA, 4mA) | Power indicator (white), winding completion indicator (green), charge indicator (red), error indicator (orange) | Two-stage charging (dielectric) method | The differential pressure type stops when the differential pressure drops by 30Pa from the set winding pressure, and the timer type winds up in 130mm sections. | Automatic operation - off - manual winding changeover switch | AC200/220V, 50/60Hz, 3 phase (high voltage power supply is single phase) | 12 mesh wire mesh | Operation circuit fuse, overcurrent relay | AC200/220V, 3-phase, E class, fully enclosed self-cooling type, output 0.1kW, reduction ratio 1:673 | Comes with door switch (high voltage supply cutoff device) and ground rod (residual charge release device) | Main unit - vinyl packaging, filter media/dust collection unit - cardboard packaging | 1 fuse, 1 control panel door key, 3 discharge wires per dust collection unit | 9~40h (setting time varies depending on model) | 2.5m/s | Winding completion indicator light, signal circuit with indicator circuit using non-voltage a contact | Differential pressure type, timer type, differential pressure/timer switching type, differential pressure/timer combination type |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Toyo Air Conditioning Co., Ltd.
View more products of Toyo Air Conditioning Co., Ltd.