All Categories
History
Response Rate
100.0%
Response Time
45.8hours
Product
Spray dryer Spray dryer SD-1010 typeHandling Company
Tokyo Rikakikai Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Power input/power voltage | Liquid pump flow range | Liquid pump | Mass | Sample stirrer rotation speed/capacity | Evaporation tube | Powder mixer | Powder collection container | Hot air air volume adjustment range | Temperature control range/accuracy | Moisture evaporation amount | Exhaust connection diameter | Safety features | External output | External dimensions (mm) | Atomizing air line cleaning function | Air connection diameter for spraying | Air pressure adjustment range for spraying | Air pressure for atomization | Spray nozzle | Air pump for spraying | Suction blower | Operating ambient temperature range | Tube diameter used | Attached functions | Heater | Type | Cyclone section | Interval timer |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SD-1010 |
Available upon quote |
21A, 4.2kVA/AC200V single phase 50/60Hz |
150~1700mL/h |
Tube pump |
Approximately 110kg |
100~1,000rpm・50mL~2L (water) |
Hard glass |
DC brushless servo output 6W, cobalt magnet |
Hard glass (capacity 600mL) |
0.2~0.75m3/min |
40~200℃ (inlet temperature) ・±1℃ |
Max.1,500mL/h |
Exhaust port outer diameter 50mm |
Evaporation tube protective cover, earth leakage/overcurrent breaker, fixed temperature overheat protector, manual recovery in case of power outage, self-diagnosis function (temperature abnormality, air volume abnormality, heater disconnection, liquid sending pressure abnormality) |
0~10mV (inlet temperature, outlet temperature, dry air amount) |
700W×620D×1,500H |
Automatic operation with interval timer |
Union for soft urethane tube 4 mm inner diameter x 6 mm outer diameter |
20~250kPa (0.2~2.5kg/cm2) |
Pressure 294kPa (3kg/cm2), flow rate 25L/min or more |
Two-fluid nozzle (nozzle hole diameter 0.71mm inner diameter) |
Air compressor for spraying (optional) |
Commutator blower, Max.0.75m3/min variable flow rate type |
5~35℃ |
Inner diameter 3.15 x outer diameter 5.2mm |
Atomizing air line valve ON-OFF switch |
3kW |
Two-fluid nozzle type Spray nozzle type |
Hard glass |
OFF or 1~20 minutes (automatic intermittent time) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
45.8hrs
