All Categories

History

Cooling water circulation device Cool Ace Eco CAE-1020A/1020S type-CAE-1020A
Cooling water circulation device Cool Ace Eco CAE-1020A/1020S type-CAE-1020S
Cooling water circulation device Cool Ace Eco CAE-1020A/1020S type-Tokyo Rikakikai Co., Ltd.

Cooling water circulation device Cool Ace Eco CAE-1020A/1020S type
Tokyo Rikakikai Co., Ltd.

Tokyo Rikakikai Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

42.2hours


About This Product

■Eco type with inverter. 47% energy saving effect

Cool Ace Eco series cooling water circulation device using an inverter system. It has an energy saving effect of approximately 47% compared to the conventional product (Model CA-1115A), contributing to reductions in power consumption and CO2 emissions. The CAE-1020S model is equipped with an emergency stop button and alarm output terminal in consideration of use in the industrial field. If the built-in pump does not have sufficient capacity, we will manufacture a high-pressure pump type separately. (Special order available) Since there is no cooling water tank, the amount of heat medium can be significantly reduced. (Usage of approximately 3L per year) The closed circulation system, which has low moisture absorption and evaporation, does not come into contact with air, so there is almost no structural change in the heating medium. Since it quickly cools down to the set temperature, you can save power by turning off the power when not in use. This product complies with the RoHS Directive. Suitable for industrial fields and equipment integration

■Supplies stable brine without condensation

Closed circulation system with no moisture absorption or evaporation. Since the heat exchanger and the lid are separate, there is no condensation on the lid. The small opening of the tank reduces brine absorption, denaturation, and frequency of replacement and replenishment.

■Quickly cools down to set temperature

The conventional model CA-1115A takes about 55 minutes to reach the set temperature (-15℃), and the CAE-1020A takes about 13 minutes to reach the set temperature. It cools quickly, so there is no need to keep the power on all the time. Contributes to power saving and cost reduction.

  • Product

    Cooling water circulation device Cool Ace Eco CAE-1020A/1020S type

Share this product


200+ people viewing

Last viewed: 2 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Cooling water circulation device Cool Ace Eco CAE-1020A/1020S type

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power input/power voltage Mass Emergency stop button Temperature setting range/accuracy Temperature setting/display Temperature control method Water tank capacity Safety features External circulation ability (50/60Hz) External circulation nozzle External input/output External dimensions (mm) Cooling capacity (at liquid temperature) -10℃ Cooling capacity (at liquid temperature) 20℃ Cooling capacity (at liquid temperature) 10℃ Cooling capacity (at liquid temperature) 0℃ Cooling/circulation method Freezer/refrigerant Operating ambient temperature range Attached functions Type
Cooling water circulation device Cool Ace Eco CAE-1020A/1020S type-Part Number-CAE-1020A

CAE-1020A

Available upon quote

8A, 0.8kVA・AC100V 50/60Hz

Approximately 50kg

-

−20~30℃ (without heater) ・±0.1℃~

Sheet key input/digital display/minimum digit 0.1℃

Inverter frequency control

3.5L (liquid volume 2.7L)

Temperature controller self-diagnosis function, refrigerator overload, sensor failure, refrigerator high pressure switch, refrigerator protection timer, circulation pump thermal protector, antifreeze flow rate switch, inverter alarm, earth leakage/overcurrent breaker─

Maximum flow rate 11.5/13.8L/min, maximum head 9.5/13m

Both discharge and return ports (Rc3/8 female thread) outer diameter 10.5mm hose port

-

340W×440 (452) D×852H

650W (559kcal/h)

1,450W (1,247kcal/h)

1,240W (1,066kcal/h)

980W (842kcal/h)

Air-cooled/closed system directional circulation

Air-cooled output 550W/R410A

5~35℃

Temperature display correction

-
Cooling water circulation device Cool Ace Eco CAE-1020A/1020S type-Part Number-CAE-1020S

CAE-1020S

Available upon quote

8A, 0.8kVA・AC100V 50/60Hz

Approximately 50kg

Standard equipment

−20~30℃ (without heater) ・±0.1℃~

Sheet key input/digital display/minimum digit 0.1℃

Inverter frequency control

3.5L (liquid volume 2.7L)

Temperature controller self-diagnosis function, refrigerator overload, sensor failure, refrigerator high pressure switch, refrigerator protection timer, circulation pump thermal protector, antifreeze flow rate switch, inverter alarm, earth leakage/overcurrent breaker─

Maximum flow rate 11.5/13.8L/min, maximum head 9.5/13m

Both discharge and return ports (Rc3/8 female thread) outer diameter 10.5mm hose port

Alarm output terminal: No-voltage contact (A contact) output 250V/DC30VMax.3A

340W×440 (452) D×852H

650W (559kcal/h)

1,450W (1,247kcal/h)

1,240W (1,066kcal/h)

980W (842kcal/h)

Air-cooled/closed system directional circulation

Air-cooled output 550W/R410A

5~35℃

Temperature display correction

With emergency stop button

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Heat Exchangers Products

Other products of Tokyo Rikakikai Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Tokyo Rikakikai Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

42.2hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree