Thin film evaporator Flash evaporator MF-10A/10C type
Tokyo Rikakikai Co., Ltd.
About This Product
■For concentrating foamy samples and heat-sensitive samples
Suitable for concentrating samples that are easily denatured by heat or foaming. The evaporator tube is designed to efficiently supply heat during a short heating time. Since the DC brushless motor is directly connected to the rotor blade, the set rotation can be maintained up to a load of 4 kgf・cm (0.392 N・m) within the maximum torque, and the viscosity increases to about 1.0 to 1.5 Pa・s (10 to 15 P). It is also possible to concentrate.
The MF-10C type is a high temperature type equipped with a mantle heater and stainless steel evaporation tube. Temperature settings can be made up to 180℃.
-
Product
Thin film evaporator Flash evaporator MF-10A/10C type
-
Handling Company
Tokyo Rikakikai Co., Ltd.
-
Categories
2 Models of Thin film evaporator Flash evaporator MF-10A/10C type
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Connection diameter | Cooler | Evaporation capacity | Evaporation tube | External dimensions (mm) | Heating source | Mass | Motor | Operating ambient temperature range | Power input/power voltage | Receiving flask | Rotating shaft seal | Rotation setting/display | Rotation speed range | Sample injection method | Temperature setting range | Timer function | Type | Ultimate vacuum | Viscosity used | Wetted parts material |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
MF-10A |
Available upon quote | Cooling water/hot water circulation nozzle outer diameter 12 mm, suction/sample nozzle outer diameter 8 mm | Vertical double pipe type Cooling area 0.3㎡ | 1140mL/h (water) when hot water is circulated at 70℃ and vacuum level is 4.0kPa (30Torr) | Jacket type Evaporation area 0.04㎡ | 625W×400D×1,416H | With external hot water circulation device (sold separately) | Approximately 40kg | DC brushless motor output 60W | 5~35℃ |
2A, 200VA/AC100V 50/60Hz A separate power source is required for the 60Hz heating source. |
Concentrated liquid side 1L, evaporated liquid side 1L, with drain cock | Vacuum seal | Volume setting/digital display | 140~1,200rpm (continuously variable speed) | ON-OFF type of solenoid valve using needle valve and timer set | Room temperature +5~90℃ | Control the sample injection amount by setting the ON-OFF time of the solenoid valve | - | Vacuum pump capacity +13.3hPa (1Torr) | Approximately 1,000cP | Hard glass, Teflon, stainless steel |
|
|
MF-10C |
Available upon quote | Cooling water/hot water circulation nozzle outer diameter 12 mm, suction/sample nozzle outer diameter 8 mm | Vertical double pipe type Cooling area 0.3㎡ | 1140mL/h (water) when hot water is circulated at 70℃ and vacuum level is 4.0kPa (30Torr) | Stainless steel | 625W×400D×1,416H | Quartz mantle heater 800W | Approximately 40kg | DC brushless motor output 60W | 5~35℃ |
8A, 800VA/AC100V 50/60Hz A separate power source is required for the heating source. The MF-10C type requires a separate power source for the mantle heater. |
Concentrated liquid side 1L, evaporated liquid side 1L, with drain cock | Vacuum seal | Volume setting/digital display | 140~1,200rpm (continuously variable speed) | ON-OFF type of solenoid valve using needle valve and timer set | Room temperature +5~180℃ | Control the sample injection amount by setting the ON-OFF time of the solenoid valve | High temperature specification | Vacuum pump capacity +13.3hPa (1Torr) | Approximately 1,000cP | Hard glass, Teflon, stainless steel |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Tokyo Rikakikai Co., Ltd.
View more products of Tokyo Rikakikai Co., Ltd.
