PSA oxygen generator SO-NC-3K series (compressor separated type)
Sanyo Electronics Industry Co., Ltd.
About This Product
■Summary
Oxygen is selectively extracted from the air using an adsorbent. The adsorbent is a crystalline hydrated aluminosilicate containing alkaline earth metals called zeolite, which has many pores and has the property of adsorbing more nitrogen than oxygen. This property is used to generate highly concentrated oxygen gas.
■Features
・Can generate high concentration oxygen gas (over 90%).
- Since no high pressure cylinder is used, there are no particular restrictions on the installation location.
- Air is the raw material gas, so you only need to pay for electricity and there is no need to replace cylinders.
-Easy to operate. After startup, it will operate fully automatically.
・No notification required under the High Pressure Gas Safety Act.
- Types tailored to specifications such as gas volume/discharge pressure are also available.
■Production form
Made to order
■Model (standard type)
・Built-in compressor generates oxygen gas amount from 0.5L/min to 20L/min.
・Separate compressor type generates oxygen gas amount from 0.5L/min to 100m^3/Hr.
・Main unit only (factory air or compressor provided by customer) Generated oxygen gas amount 0.5L/min to 100m^3/Hr.
- We can also supply OEM products such as those installed inside the customer's case.
- Types that match specifications such as gas volume/discharge pressure other than those listed above are also available.
■PSA (Pressure Swing Adsorption) operation
PSA oxygen generators selectively extract oxygen from the air using adsorbents. The adsorbent is a crystalline hydrated aluminosilicate containing alkaline earth metals called zeolite, which has many pores and has the property of adsorbing more nitrogen than oxygen. Utilizing this property, highly concentrated oxygen gas is generated as follows.
The raw air is taken into the compressor. The compressed air is filtered to remove dust and sent to the adsorption column. The two adsorption cylinders are switched alternately every few tens of seconds, and nitrogen gas, carbon dioxide gas, moisture, etc. are adsorbed from the air sent, and only oxygen gas is sent to the product buffer tank (adsorption process). .
Meanwhile, the other adsorption cylinder is depressurized to atmospheric pressure and the adsorbed nitrogen gas is discharged to the atmosphere, and the adsorbent is regenerated (desorption process). By repeating this process alternately, it is possible to continuously generate highly concentrated oxygen gas.
-
Product
PSA oxygen generator SO-NC-3K series (compressor separated type)
-
Handling Company
Sanyo Electronics Industry Co., Ltd.
-
Categories
6 Models of PSA oxygen generator SO-NC-3K series (compressor separated type)
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Device dimensions (mm) W×D×H (excluding protruding parts) | Oxygen amount NL/min | Oxygen amount Nm3/h | Power specifications 50/60Hz | Pressure MPa | Weight kg |
|---|---|---|---|---|---|---|---|---|
|
|
SO-008NC-3K |
Available upon quote | 560×480×1,040 | 12.5 | 0.75 | Three-phase AC200V | Max 0.3 | 170 |
|
|
SO-015NC-3K |
Available upon quote | 560×480×1,040 | 18.3 | 1.1 | Three-phase AC200V | Max 0.3 | 170 |
|
|
SO-020NC-3K |
Available upon quote | 560×480×1,040 | 30 | 1.8 | Three-phase AC200V | Max 0.3 | 170 |
|
|
SO-035NC-3K |
Available upon quote | 800×500×1,600 | 45 | 2.7 | Single phase AC100V | Max 0.3 | 400 |
|
|
SO-050NC-3K |
Available upon quote | 800×500×1,600 | 60 | 3.6 | Single phase AC100V | Max 0.3 | 400 |
|
|
SO-500NC-3K |
Available upon quote | 2,550×1,600×2,700 | 583 | 35 | Single phase AC100V | Max 0.3 | 2,900 |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Sanyo Electronics Industry Co., Ltd.
View more products of Sanyo Electronics Industry Co., Ltd.
