PSA oxygen generator SO-NC series (compressor separated type)-SO-008NC
PSA oxygen generator SO-NC series (compressor separated type)-Sanyo Electronics Industry Co., Ltd.

PSA oxygen generator SO-NC series (compressor separated type)
Sanyo Electronics Industry Co., Ltd.


About This Product

■Summary Oxygen is selectively extracted from the air using an adsorbent. The adsorbent is a crystalline hydrated aluminosilicate containing alkaline earth metals called zeolite, which has many pores and has the property of adsorbing more nitrogen than oxygen. This property is used to generate highly concentrated oxygen gas. ■Features ・Can generate high concentration oxygen gas (over 90%). - Since no high pressure cylinder is used, there are no particular restrictions on the installation location. - Air is the raw material gas, so you only need to pay for electricity and there is no need to replace cylinders. -Easy to operate. After startup, it will operate fully automatically. ・No notification required under the High Pressure Gas Safety Act. - Types tailored to specifications such as gas volume/discharge pressure are also available. ■Production form Made to order ■Model (standard type) ・Built-in compressor generates oxygen gas amount from 0.5L/min to 20L/min. ・Separate compressor type generates oxygen gas amount from 0.5L/min to 100m^3/Hr. ・Main unit only (factory air or compressor provided by customer) Generated oxygen gas amount 0.5L/min to 100m^3/Hr. - We can also supply OEM products such as those installed inside the customer's case. - Types that match specifications such as gas volume/discharge pressure other than those listed above are also available. ■PSA (Pressure Swing Adsorption) operation PSA oxygen generators selectively extract oxygen from the air using adsorbents. The adsorbent is a crystalline hydrated aluminosilicate containing alkaline earth metals called zeolite, which has many pores and has the property of adsorbing more nitrogen than oxygen. Utilizing this property, highly concentrated oxygen gas is generated as follows. The raw air is taken into the compressor. The compressed air is filtered to remove dust and sent to the adsorption column. The two adsorption cylinders are switched alternately every few tens of seconds, and nitrogen gas, carbon dioxide gas, moisture, etc. are adsorbed from the air sent, and only oxygen gas is sent to the product buffer tank (adsorption process). . Meanwhile, the other adsorption cylinder is depressurized to atmospheric pressure and the adsorbed nitrogen gas is discharged to the atmosphere, and the adsorbent is regenerated (desorption process). By repeating this process alternately, it is possible to continuously generate highly concentrated oxygen gas.

  • Product

    PSA oxygen generator SO-NC series (compressor separated type)

Share this product


320+ people viewing

Last viewed: 14 hours ago


Free
Since our quotes are free, feel free to use our service.

No Phone Number Required
You won’t have to worry about receiving unnecessary calls.

8 Models of PSA oxygen generator SO-NC series (compressor separated type)

Items marked with have different values depending on the model number.

Click on the part number for more information about each product

Product Image Part Number Price (excluding tax) Device dimensions (mm) W×D×H (excluding protruding parts) Oxygen amount NL/min Oxygen amount Nm3/h Power specifications 50/60Hz Pressure MPa Weight kg
PSA oxygen generator SO-NC series (compressor separated type)-Part Number-SO-008NC

SO-008NC

Available upon quote 560×480×1,040 8 0.48 Three-phase AC200V Max 0.2 170
PSA oxygen generator SO-NC series (compressor separated type)-Part Number-SO-015NC

SO-015NC

Available upon quote 560×480×1,040 15 0.9 Three-phase AC200V Max 0.2 170
PSA oxygen generator SO-NC series (compressor separated type)-Part Number-SO-020NC

SO-020NC

Available upon quote 560×480×1,040 20 1.2 Three-phase AC200V Max 0.2 170
PSA oxygen generator SO-NC series (compressor separated type)-Part Number-SO-035NC

SO-035NC

Available upon quote 800×500×1,600 35 2.1 Single phase AC100V Max 0.2 400
PSA oxygen generator SO-NC series (compressor separated type)-Part Number-SO-050NC

SO-050NC

Available upon quote 800×500×1,600 50 3 Single phase AC100V Max 0.2 400
PSA oxygen generator SO-NC series (compressor separated type)-Part Number-SO-070NC-4AT

SO-070NC-4AT

Available upon quote 800×900×1,700 70 4.2 Single phase AC100V Max 0.2 700
PSA oxygen generator SO-NC series (compressor separated type)-Part Number-SO-100NC-4AT

SO-100NC-4AT

Available upon quote 800×900×1,700 100 6 Single phase AC100V Max 0.2 700
PSA oxygen generator SO-NC series (compressor separated type)-Part Number-SO-8NC-4AT

SO-8NC-4AT

Available upon quote 800×900×2,000 133 8 Single phase AC100V Max 0.2 800

Click on the part number for more information about each product

Customers who viewed this product also viewed

Other products of Sanyo Electronics Industry Co., Ltd.


View more products of Sanyo Electronics Industry Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree