All Categories

History

Servo press / press control unit MPU60-MPU60-40- *
Servo press / press control unit MPU60-ESTIC CORPORATION

Servo press / press control unit MPU60
ESTIC CORPORATION

ESTIC CORPORATION's Response Status

Response Rate

100.0%

Response Time

15.4hours

Relatively Fast Response


About This Product

Estic's servo press was developed using the control technology of the servo motor cultivated in the development of electric nutranna. Traceability is perfect because you can collect various data on pressurization. Not only the load but also the time and position data, so that the pressure is poor is detected. Because of electric driving, it enables clean and energy -saving pressure compared to hydraulic and empty pressure. The press control unit MPU60 is the latest model that integrates the conventional MU (master control unit) and SPU (press control unit) to achieve a 50 % size down. Improved operability with intuitive user interface. feature ・ Return to the pressurized parameter from FieldBus ・ Do not overlook the problem with the judgment function of up to 32 zones ・ Improved operability with intuitive user interface ・ The latest model that integrates the conventional MU (master control unit) and SPU (press control unit) to achieve a 50 % size down Pressure sequence control ・ Up to 255 programs ・ Pressure sequence control of up to 127 steps 1 program ・ Easy construction of complex pressurized sequences without external control ・ Seamless pressurization is set by setting the stop between steps arbitrarily. Load zone judgment (upper and lower limit monitoring of load in any position (zone)) ・ Stop by detecting unloads outside the range to prevent damage to work. ・ You can select the zone monitoring method from the position/distance ・ 1 program up to 32 zones ・ Can be set from the curve display screen ・ The zone is possible for the program operation regardless of the step

  • Product

    Servo press / press control unit MPU60

Share this product


430+ people viewing

Last viewed: 15 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Servo press / press control unit MPU60

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Motor type Control power supply voltage Main power supply voltage Control power supply capacity Main power supply capacity (when rated) When the control power is launched, the entry current value When the main power supply is launched Display / operation unit Control input (PIN) Control output (POUT) Number of maximum pressurization programs SS function External communication port/RS-232C External communication port/Ethernet External communication port/PC-USB External communication port/FieldBus Number of data memory others Load display resolution (KN) Location display resolution (mm) Repeated position accuracy (mm) Repeated load accuracy Non -linear External dimensions (mm)/w External dimensions (mm)/D External dimensions (mm)/h Mass (kg)
Servo press / press control unit MPU60-Part Number-MPU60-40- *

MPU60-40- *

Available upon quote

A

Single -phase AC200 to 230V ± 10%50/60Hz

Three -phase AC200-230V ± 10%50/60Hz

50VA

0.4kva

Approximately 26AO-P (convergence time: about 5ms)

Approximately 6AO-P (convergence time: about 400ms)

5 characters x 1 digit 7 segment LED display, function key (5), display lamp (OK/ALM/NG)

Photocapula isolation 16 points (DC24V transfer current 6 ma/point), sink ( -common), source ( + common) can be connected both

Photo MOS output 16 points (DC24VMAX.50mA/point), sink ( -common), source ( + common) can be connected both

255 program x 127 steps, number of step execution programs: 1280 (maximum program x 5 steps)

SS (safe stop) function (blocking the power source to the motor without cutting the power supply or motor cable)

RS-232C x 1 port (9600bps-115.2kbps variable)

Ethernet connection x 2 ports 10/100BASE-T

Management Soft Connection Port USB connector (mini-b type)

DeviceNet/Profibus/CC-LINK/Ethernet/IP/EtherCat/CC-LINKIE/PROFINET

Pressure result history: Up to 100,000, pressurized curve history: up to 1,000+NG curve 100 (fluctuations in sampling size settings), system error history: up to 200 cases

Free allocation function (control input / output signal)

Better 20kN: 0.001/30kN or higher: 0.01

0.001

± 0.01 (under the same conditions)

3σ/x-bar ≦ 1.5%or less (for the maximum pressing force)

± 2%R.O

109.8

170.4

222

Approximately 3.2 (kg)

Servo press / press control unit MPU60-Part Number-MPU60-5k- *

MPU60-5k- *

Available upon quote

C

Single -phase AC200 to 230V ± 10%50/60Hz

Three -phase AC200-230V ± 10%50/60Hz

50VA

3.4kva

Approximately 26AO-P (convergence time: about 5ms)

Approximately 6AO-P (convergence time: about 400ms)

5 characters x 1 digit 7 segment LED display, function key (5), display lamp (OK/ALM/NG)

Photocapula isolation 16 points (DC24V transfer current 6 ma/point), sink ( -common), source ( + common) can be connected both

Photo MOS output 16 points (DC24VMAX.50mA/point), sink ( -common), source ( + common) can be connected both

255 program x 127 steps, number of step execution programs: 1280 (maximum program x 5 steps)

SS (safe stop) function (blocking the power source to the motor without cutting the power supply or motor cable)

RS-232C x 1 port (9600bps-115.2kbps variable)

Ethernet connection x 2 ports 10/100BASE-T

Management Soft Connection Port USB connector (mini-b type)

DeviceNet/Profibus/CC-LINK/Ethernet/IP/EtherCat/CC-LINKIE/PROFINET

Pressure result history: Up to 100,000, pressurized curve history: up to 1,000+NG curve 100 (fluctuations in sampling size settings), system error history: up to 200 cases

Free allocation function (control input / output signal)

Better 20kN: 0.001/30kN or higher: 0.01

0.001

± 0.01 (under the same conditions)

3σ/x-bar ≦ 1.5%or less (for the maximum pressing force)

± 2%R.O

132.8

191.4

245

Approximately 4.5 (kg)

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Press Units Products

Other products of ESTIC CORPORATION

Reviews shown here are reviews of companies.


View more products of ESTIC CORPORATION

About Company Handling This Product

Response Rate

100.0%


Response Time

15.4hrs

Company Overview

Estic Global provides serves manufacturing and automotive industries as well as providing CAD-related machiner...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree