All Categories
History
Relatively Fast Response
Product
Optical fiber strain sensor newLight FS62/Welded strain rosette FS62WSRHandling Company
Hottinger Brüel & KjærCategories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Weight | Measuring range | Temperature cross sensitivity | Insertion loss | Sensitivity | Size | Installation method | Operating humidity, storage humidity | Operating temperature | Resolution | Input/output connector | Input/output cable length | Input/output cable type | Input/output cable bending radius | Optical fiber cladding diameter/covering diameter | Storage temperature | Main material | Fiber type | Hand width (FWHM), reflectance, sidelobe suppression | Bending radius of sensor part | Gauge length | K factor | FBG reflection wavelength |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FS62WSR (with Amilad or Armored cable) |
Available upon quote |
Aramid: 31g, Armor: 62g (weight with 2m long cable on both sides and without connector) |
±2,000μm/m (0.2%) |
6.6±1 (μm/m) /℃ (Temperature cross sensitivity (TCS) is the thermal strain induced when the temperature fluctuates by 1℃) |
0.2 dB (typical for standard telecom fiber (ITU-TG.652.D) without connector and dual splice) |
1.2pm/ (μm/m) (Typical value. Value for FBG with wavelength 1,550nm.) |
72.0±1×67.1±1×6.1±0.5mm, sensor board thickness: 0.1mm |
Spot welding (Please use low power 20~70V, 26~80W for spot welding machine) |
＜95% |
-20~+80℃ (In environments exceeding 60℃, creep values exceeding 0.5% may be observed) |
0.5μm/m (Resolution 0.5pm in wavelength measurement is the value obtained by interrogator FS22SI) |
FC/APC, SC/APC, NC (no connector) |
0.5~20m |
Φ3mm aramid cable (Hytrel, Kevlar®, LSZH) or Φ3mm armored cable (Hytrel, stainless steel spiral, Kevlar®, stainless mesh, LDPE) |
>30mm (When tested by winding the cable around a mandrel (cylindrical reel with a radius of 16mm or 30mm), the induction loss during one rotation is less than 0.05dB) |
125/195μm |
-20~+80℃ (In environments exceeding 60℃, creep values exceeding 0.5% may be observed) |
Stainless steel, epoxy, Ormocer® (the complete sensor configuration including cable is RoHS, REACH, Conflict Minerals and Fire Propagation Directive compliant) |
SMF-28 compatible |
≤0.3nm, 21±4%, >10dB |
>400mm |
36mm |
0.76±0.02 |
1,500~1,600nm (±1) |
|
|
FS62WSR (with braided cable) |
Available upon quote |
8g (Weight when cable length is 2m and there are no connectors at both ends) |
±2,000μm/m (0.2%) |
7.5±1 (μm/m) /℃ (Temperature cross sensitivity (TCS) is the thermal strain induced when the temperature fluctuates by 1℃) |
0.2 dB (typical for standard telecom fiber (ITU-TG.652.D) without connector and dual splice) |
1.2pm/ (μm/m) (Typical value. Value for FBG with wavelength 1,550nm.) |
67.1±1×60.6±1×2.6±0.5mm |
Spot welding (please use low power, 20~70V, 26~80W for spot welding machine) |
＜95% |
-40~+100℃ |
0.5μm/m (Resolution 0.5pm in wavelength measurement is the value obtained by interrogator FS22SI) |
FC/APC, SC/APC, NC (no connector) |
0.5~6m |
Φ1mm braid (glass fiber, silicone varnish) |
>16mm (When tested by winding the cable around a mandrel (cylindrical reel with a radius of 16mm or 30mm), the induction loss during one revolution is less than 0.05dB) |
125/195μm |
-20~+80℃ (limited by connector) |
Stainless steel, epoxy, Ormocer® (the complete sensor configuration including cable is RoHS, REACH, Conflict Minerals and Fire Propagation Directive compliant) |
SMF-28 compatible |
≤0.3nm, 21±4%, >10dB |
>300mm (At room temperature, the Bragg wavelength can vary by about ±1 nm at maximum bending radius. As the Bragg wavelength increases, bending radii of up to 10cm are allowed) |
36mm |
0.76±0.02 |
1,500~1,600nm (±1) |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
![Optical fiber cord/cable [Single core] Optical patch cord-Alp Systems Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006900202410291.png)
![Optical fiber cord/cable [2 core] Optical patch cord-Alp Systems Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006900202410292.png)
