All Categories
History
Relatively Fast Response
Product
Optical fiber strain sensor newLight FS62/Patch strain rosette FS62PSRHandling Company
Hottinger Brüel & KjærCategories
| Image | Part Number | Price (excluding tax) | Weight | Measuring range | Fatigue | Temperature cross sensitivity | Insertion loss | Sensitivity | Sensitivity in width direction | Size | K coefficient for each FBG | Installation method | Operating humidity, storage humidity | Operating temperature | Resolution | Input/output connector | Input/output cable length | Input/output cable type | Input/output cable bending radius | Optical fiber cladding diameter/covering diameter | Storage temperature | Main material | Fiber type | Hand width (FWHM), reflectance, sidelobe suppression | Bending radius of sensor part | Gauge length | FBG reflection wavelength |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FS62PSR |
Available upon quote |
11g (when the cable length on both sides is 2m and there is no connector) |
±10,000μm/m (1%) |
Εw=±1,000μm/m and Δεm≤30μm/m, >>10^7 (stops after 10^7 load cycles) |
7.6±1 (μm/m) /℃ (Temperature cross sensitivity (TCS) is the thermal strain induced when the temperature changes by 1℃) |
0.3 dB (typical for standard telecom fiber (ITU-TG.652.D) without connector and dual splice) |
1.2pm/ (μm/m) (Standard value per FBG. Value for FBG with wavelength 1,550nm.) |
0% (per FBG. Based on VDI/VDE/GESA2635. Since lateral sensitivity is 0, tolerance cannot be given) |
47±1×50±1×2±0.5mm |
0.79±0.03 |
Adhesive (Z70, X60, X280) (X280: Contact pressure when using optical strain gauge and X280: 1N/cm2) |
＜95% |
-40~+100℃ |
0.5μm/m (Resolution 0.5pm in wavelength measurement is the value obtained by interrogator FS22SI) |
FC/APC, SC/APC, NC (no connector) |
0.5~6m |
Φ1mm braid (glass fiber, silicone varnish) |
>16mm (less than 0.05dB induction loss with one complete turnaround of the mandrel) |
125/195μm |
-20~+80℃ (limited by connector) |
Modified acrylic resin, resin potting, vinyl, Ormocer® (complete sensor configuration including cables is RoHS, REACH, Conflict Minerals and Fire Propagation Directive compliant) |
SMF-28 compatible |
≤0.3nm, 21±4%, >10dB |
>25mm |
36mm |
1,500~1,600nm (±1) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
