All Categories
History
Relatively Fast Response
Product
Optical fiber strain sensor newLight FS62/Optical fiber welded strain sensor FS62WSSHandling Company
Hottinger Brüel & KjærCategories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Weight | Measuring range | Thermal strain | Lateral sensitivity | Sensitivity | Size | Installation method | Operating humidity, storage humidity | Operating temperature, storage temperature | Resolution | Input/output connector | Input/output cable length | Input/output cable type | Input/output cable bending radius | Optical fiber cladding diameter/covering diameter | Main material | Fiber type | Hand width (FWHM), reflectance, sidelobe suppression | Bending radius of sensor part | Gauge length | K factor | FBG reflection wavelength | Impact resistance (at 50g SRS) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FS62WSS (with aramid fiber reinforcement or armored cable) |
Available upon quote |
Φ3mm aramid fiber reinforced cable: 19, Φ3mm armored cable: 63 |
±5,000μm/m (0.5%) |
7.6±1 (μm/m)/℃ |
<2% |
1.2pm/ (μm/m) (Typical value. Value at FBG with wavelength 1,550nm) |
83±1×23±1×6±0.5mm |
By spot welding |
Operating humidity: 100% or less, storage humidity: less than 95% |
-20~+80℃ (If the temperature exceeds 60℃, the deformation due to creep may exceed 0.5%.) |
0.5μm (Resolution 0.5pm in wavelength measurement is the value obtained by interrogator FS22SI) |
FC/APC, SC/APC, NC (no connector) |
0.5~20m |
Φ3mm aramid fiber reinforced cable (Hytrel, Kevlar®, LSZH) or Φ3mm armored cable (Hytrel, stainless steel spiral, Kevlar®, stainless steel woven mesh, LDPE) |
Bendable up to R30 |
125/195μm |
Stainless steel, epoxy, Ormocer® |
SMF-28 compatible |
≦Over 0.3nm, 21±4%, Over 10dB |
Bendable up to R400 |
40mm |
0.76±0.03 |
1,500~1,600nm (±0.75) |
>10^4 number of cycles |
|
|
FS62WSS (braided cable) |
Available upon quote |
6g (when the cable length on both sides is 2m and there is no connector) |
±10,000μm/m (1%) |
7.8±1 (μm/m) /℃ (Temperature cross sensitivity is the thermal strain induced when the temperature fluctuates by 1℃) |
0% (according to VDI/VDE/GESA 263. Since the lateral sensitivity is 0, no tolerance can be given) |
1.2pm/ (pm/ (μm/m) ) (Typical value. Value at FBG with wavelength 1,550nm) |
60±1×12±1×2.5±0.5mm (welded plate thickness 100μm) |
By spot welding |
Operating humidity: ≤100%, storage humidity: <95% |
Operating temperature: -40~+100℃, storage temperature: -20~+80℃ (limited by connector) |
0.5μm |
FC/APC, SC/APC, NC (no connector) |
0.5~6m |
Φ1mm braid (glass fiber, silicone varnish) |
>16mm (Inductive loss less than 0.05dB per turn when tested by wrapping the cable around a mandrel (cylindrical reel with a radius of 16mm or 30mm)) |
125/195μm |
Stainless steel, epoxy, Ormocer® (complete sensor configuration including cable is RoHS, REACH, Conflict Minerals and Fire Propagation Directive compliant) |
SMF-28 compatible |
≦0.3nm, 21±4%, ＞10dB |
>300mm |
＜10mm |
0.76±0.03 |
1,500~1,600nm (±0.75) |
- |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
