All Categories
History
Relatively Fast Response
Product
Optical fiber strain sensor newLight FS62/Optical fiber composite strain sensor FS62CSSHandling Company
Hottinger Brüel & KjærCategories
Image | Part Number | Price (excluding tax) | Weight | Measuring range | Temperature cross sensitivity | Sensitivity | Sensitivity in width direction | Size | Installation method | Operating humidity, storage humidity | Operating temperature, storage temperature | Resolution | Input/output connector | Input/output cable length | Input/output cable type | Input/output cable bending radius | Optical fiber cladding diameter/covering diameter | Main material | Fiber type | Hand width (FWHM), reflectance, sidelobe suppression | Bending radius of sensor part | Gauge length | K factor | FBG reflection wavelength |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
FS62CSS |
Available upon quote |
Φ3mm aramid: 53, Ø3mm armor: 97 |
±5,000μm/m (0.5%) |
7.3±1 (μm/m) /℃ (Temperature cross sensitivity is the thermal strain induced when the temperature changes by 1℃) |
1.2pm/ (μm/m) (Typical value. Value at FBG with wavelength 1,550nm) |
0% |
130±0.5×20±0.5×6±0.5mm |
Adhesive (HBK FiberSensing recommends using a two-part epoxy adhesive such as 3M DP490 cold cure adhesive) |
<95% |
-20~+80℃ (Aramid cable starts to change its mechanical properties above 70℃. Sensor operation and measurement values are not affected by this change) |
0.5μm (Resolution 0.5pm in wavelength measurement is the value obtained by interrogator FS22SI) |
FC/APC, SC/APC, NC (no connector) |
0.5~20m |
Φ3mm aramid cable (Hytrel, Kevlar®, LSZH) or Φ3mm armored cable (Hytrel, stainless steel spiral, Kevlar®, stainless mesh, LDPE) |
>30mm |
125/195μm |
GFRP (glass fiber reinforced plastic), polyurethane, Ormocer® |
SMF-28 compatible |
≤0.3nm, 21±4%, >10dB |
>1,000mm |
10~92mm |
0.79±0.03 |
1,500~1,600nm (±0.75) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.